Epson Powerlite 62c Multimedia Projector Users Guide

Fine-tuning the Projector61
3. Press Enter. Then use the  pointer button (or up and down 
arrow buttons) and the 
Enter button to set the following options:
■Keystone
Adjusts a distorted image from a trapezoid shape to 
rectangular. 
■Auto Keystone
Automatically adjusts a distorted image from a trapezoid 
shape to rectangular when the projector’s foot is extended or 
retracted. (Not available when  you’re projecting from the 
ceiling or using rear projection.) Select 
ON or OFF.
■Operation Lock
When...

62Fine-tuning the Projector
Selecting Projector Setup Options
Use the Extended menu to customize the way you set up the 
projector. You can configure the projector for rear and/or ceiling 
projection, change the language for the menus and messages, set the 
screen background color, capture and store a custom image or logo for 
the startup screen, and set up the projector for network use.
1. Press the 
Menu button.
2. Select the 
Extended menu. You see the features and their settings 
on the right side:...

Fine-tuning the Projector63
■Projection
Front:
 Projector is in front of the screen.
Front/Ceiling: Projector is in front of the screen, mounted 
upside-down from the ceiling.
Rear: Projector is behind the screen.
Rear/Ceiling: Projector is behind the screen, mounted 
upside-down from the ceiling.
■Operation
Direct Power:
 When this feature is enabled, projection starts 
as soon as you plug in the power cord. You don’t have to 
press the  P
Power button.
Sleep Mode: When Sleep Mode is on, the projector...

64Fine-tuning the Projector
Viewing Lamp Usage and Other 
Information
Use the Info menu to view information about the display settings of 
your computer and the number of hours the lamp has been used.
1. Press the 
Menu button and select the Info menu. You see one of 
the following menus:
■Lamp Hours
Displays the number of hours the lamp has been used. The 
life span of the lamp ranges from about 2000 hours in 
High 
brightness mode to about 3000 hours in 
Low brightness 
mode. If the number shown  is...

Fine-tuning the Projector65
■Source
Displays the input source currently being projected.
■Input Signal (computer, RGB video, and component video)
Displays the input signal setting.
■Resolution (computer, RGB video,  and component video)
Displays the input resolution.
■Video Signal (composite and S-Video)
Displays the video signal format.
■Refresh Rate (computer, RGB video, and component video)
Displays the refresh rate.
■Sync Info (computer, RGB video, and component video)
Provides information that may...

66Fine-tuning the ProjectorIf you assign the projector a passwor
d, a screen appears requesting the 
password whenever the projector is turned on. If you enter the 
password incorrectly three times in succession, the projector’s 
operation is locked and you’ll need to disconnect the power cord, then 
reconnect it to redisplay the passwo rd screen. If an incorrect password 
is entered 30 times in a row, the projector is locked and you’ll need to 
contact Epson to unlock it. See “W here To Get Help” on...

Fine-tuning the Projector67
3. Use the  pointer button (or the down arrow button) and press 
Enter to select User’s Logo.
4. When you see a message asking if you want to use the present  image as a user’s logo, select 
Yes and press Enter. A selection box 
displays over the image.
5. Use the  pointer button on the remote control or the arrow  buttons on the projector to select the area of the image you want 
to use. Once you have selected the area, press 
Enter.
6. When you see the message 
Select this...

68Fine-tuning the Projector
Setting a Password 
1. Press the Freeze button on the remote control for about 7 seconds 
until you see the Password Protect menu:
2. Select 
Password and press Enter. You see the message Change 
the password?
 
3. Select 
Yes and press Enter.
4. Hold down the 
Num key on the remote control and use the 
numeric keypad to enter a 4-digit password. 
The password will be displayed as 
****. After you enter the last 
digit, a confirmation screen appears. Enter the password...

Fine-tuning the Projector69
The countdown for the elapsed time begins as soon as you close 
the Password Protect menu. (You can check the elapsed time in 
this menu next to 
Time elapsed.)
4. To enable your screen logo, select 
User’s Logo Protect and press 
Enter. Select ON and press Enter. 
When this feature is on the logo appears whenever the projector is 
turned on (if the 
Startup Screen is enabled in the Extended 
menu; see page 62) and as the A/V  Mute screen (if you selected 
the 
Logo as the...

70Fine-tuning the ProjectorIf the password is not correct, you see the message 
Wrong password. 
Please try again.
 If you enter an incorrect password three times in 
succession, you see the message 
The projector’s operation will be 
locked. Request code xxxxx
 and the projector switches to standby 
mode for approximately 5 minutes. Write down the request code. 
Then disconnect the projector’s powe r cord from the electrical outlet, 
reconnect it, and turn the projector back on. 
When you see the...