Epson PictureMate User Manual

40
If you chose the wrong photo, you can deselect it. Highlight the selected photo 
and press 
OK to uncheck it. If you need to change the number of copies, press OK 
twice and change the number as described in step 3. 
5. When you’re done selecting photos, press   
Print. 
You see this screen: 
6. Confirm your photo selections (press  or   to scroll and see all your selected 
photos), then press   
Print again to start printing. 
Note: If the print confirmation is off, you will not see the screen above...

41
Tip: You can also crop your photos, print in black and white or sepia, or add the 
time or date. (See Doing More With Your Prints
.)
If the PictureMate Print Wizard is on the screen, press Cancel twice. The Main 
Menu appears, as shown above. 
You will also see the Main Menu after you finish printing from the PictureMate Print 
Wizard. 
When no card is inserted in PictureMate, you see the Main Menu. 
Tip: To turn off the PictureMate Print Wizard and see the Main Menu only, see 
Turning the PictureMate...

42All Photos 
1. Press  or   to highlight Select Photo, then press OK. 
2. Press  or   to highlight 
All Photos, then press OK. 
3. Go to Setting the Number of Copies in the Main Menu
 to continue. 
One Photo 
1. Press  or   to highlight Select Photo, then press OK. 
2. Press  or   to highlight 
One Photo, then press OK. 
3. Press  or   to highlight the photo you want to print, then press 
OK. 
Tip: Hold down  or  to scroll quickly. 
 

43
You see the selected photo on the Main Menu:
4. Go to Setting the Number of Copies in the Main Menu
 to continue. 
Several Photos
You can choose any photos on your card to print. 
1. Press  or   to choose 
Select Photo, then press OK. 
2. Press  or   to highlight 
Several, then press OK. 
3. Press  or   to highlight the photo number, then press 
OK to choose it. 
Tip: Hold down  or  to scroll quickly. 
4. Press  or   to choose the number of copies to print for that photo (up to 10), 
then press 
OK.
 

44
5. Repeat steps 3 and 4 for each additional photo. The screen shows selected photos 
and a number of copies for each. (You may need to press  or   to scroll and see 
all your selected photos.) 
Note: If you chose the wrong photo, you can deselect it. Highlight the selected 
photo and press OK to uncheck it. If you need to change the number of copies, 
press OK twice and change the number as described in step 3.
6. When you’re done, press Back. You see the Main Menu with Several selected. 
7. Go to...

45
3. Press  or   to choose the first photo under From. Then press OK.
Tip: Hold down  or  to scroll quickly. 
4. Press  or   to choose the last photo under To. Then press OK. 
5. Go to Setting the Number of Copies in the Main Menu
 to continue. 
Camera-selected DPOF Photos
If your camera supports DPOF (Digital Print Order Format), you can use it to 
pre-select which photos you want to print and how many copies.
See your camera’s manual to choose photos for printing with DPOF, then insert your 
memory...

46
If DPOF has been deselected and you want to select it again, follow these steps: 
1. On the Main Menu, press   or   to highlight 
Select Photo, then press OK. 
2. Press   or   to highlight 
DPOF, then pressOK. 
The photos that you chose from your camera to print are automatically selected, 
including the number of copies. 
Setting the Number of Copies in the Main Menu
You can print from 1 to 100 copies. Keep in mind that if you are printing all photos 
or a range of photos, the number of copies...

47
2. Press  or   to highlight the number of copies you want to print for each photo 
(
1 - 100), then press OK. 
3. Continue with Choosing a Layout
 to choose a layout for your photos. 
Choosing a Layout
1. On the Main Menu, press  or   to choose Layout, then press OK. 
2. Press  or   to highlight the layout setting you want for your photo(s), then 
press 
OK. 
You have four choices:
3. Continue with Confirming and Printing
 to print your photos. 
Confirming and Printing
Once you have made all the basic...

48
Before printing, you may want to select other options for your photos. See Doing 
More With Your Prints for details. 
1. Press 
Print.
2. Confirm your photo selections (press  or   to scroll and see all your selected 
photos) 
■If the list is okay, press Print again to print your photo(s).
■To make changes, press Cancel to go back. 
Note: If the Print Confirmation is off, you will not see the screen above and only 
need to press Print once. (See Turning Print Confirmation Off or On
 for details.)
Load...

49
All of these features are available under More Options on PictureMate’s Main Menu. 
Note: The features described in this section do not affect or replace the original 
digital photo file; they customize only the print(s) that you make at that one time. 
These settings do not appear in the Print Confirmation screen. 
Printing Photos in Black and White or Sepia 
You can print your photo in black and white or sepia tone, without changing the 
original photo. 
Note: A sepia print has a brownish tone, for...