Epson P5000 User Manual

151
9.
After each alignment sheetisprinted, viewtheLCD screen forinstructions onselecting thebest
 pattern
ineach pattern set.
 10.
Check theprinted patterns andchoose thenumber representing thepattern inwhich thewhite lines
 are
themost evenly spaced, thenpress theOK button.
 If
your product isnot properly aligned,selectadifferent alignment methodandrepeat theprocess.
 Parent
topic:PrintHead Alignment
 Related
references
 Maintenance
MenuSettings 

152
Maintenance
andTransportation
 See
theinstructions inthese sections tomaintain yourprinter foroptimum results,ortomove or
 transport
yourprinter.
 Cleaning
YourProduct
 Replacing
theCutter
 Moving
orTransporting YourProduct
 Cleaning
YourProduct
 To
keep yourproduct working atits best, youshould cleanitregularly (aboutonceamonth).
 Note:
Donot use ahard brush, benzene, alcohol,orpaint thinner toclean theproduct oryou may
 damage
it.Do not use oilorother lubricants insidetheproduct orlet water...

153
6.
Gently wipethelight blue areas inthe direction indicated bythe arrow.
 Note:
Donot touch thegray areas (therollers orthe inkabsorption pads)oryour prints maybe
 soiled.

Caution:
Becareful nottotouch theinktubes inside theproduct.
 7.
Ifyour product isstill dirty, dampen thecloth withasmall amount ofwater andamild detergent and
 repeat
theprevious step.Then wipetheinside ofthe printer withasoft, drycloth.  

154
8.
Ifpaper particles haveaccumulated inthe holes onthe platen, useatoothpick orsimilar tooltopush
 them
through.
 9.
Close theprinter cover.
 10.
Use asoft, clean clothtoremove anydust ordirt from theoutside ofthe product.
 11.
Plug thepower cordandinterface cablesbackin.
 12.
Turn onthe product.
 13.
Load rollpaper inthe printer.
 14.
Press thepaper feedbutton several timestofeed blank paper through thepaper pathandclean
 the
rollers.
 15.
Press the papercutbutton.
 Cleaning
theRoll Paper...

155
You
canpurchase genuineEpsonink,paper, andaccessories fromanEpson authorized reseller.To
 find
thenearest reseller, visitproimaging.epson.com (U.S.)orproimaging.epson.ca (Canada),select
 your
product seriesandproduct, andclick theWhere toBuy button. Orcall 800-GO-EPSON (800-463-
 7766)
inthe U.S. or800-807-7766 inCanada.
 1.
Turn onthe printer.
 2.
Press the papersource buttononthe control paneltoselect Paper Type.
 3.
Press theupordown arrow button toselect RollPaper/Cut orRoll Paper/No Cut,and...

156
Note:
Donot touch theadhesive onthe sheet (thedark grayarea).
 7.
With theadhesive facingtoward you,insert thecleaning sheetonthe leftside ofthe printer untilit
 reaches
theend ofthe rollpaper feedslot,then pullitout. Repeat thistwotothree times. Repeat for
 the
center andright sideofthe rollpaper feedslot.
 Note:
Youcanuseacleaning sheetonlyonce.
 8.
Press theloadpaper button whencomplete.
 Parent
topic:Cleaning YourProduct
 Related
references
 Optional
Equipment andReplacement Parts
 Replacing...

157
2.
Open theleftand right inkcartridge covers.
 3.
Open theprinter cover.   

158
4.
Use aPhillips-head screwdrivertoremove thefour screws securing thefront cover, thenremove the
 front
cover.  

159
5.
Press inon the tabonthe cutter cover, release it,and pulldown onthe cutter covertoopen it.
 6.
Loosen thescrew holding thecutter inplace andcarefully removethecutter.
 Warning:
Keepthecutter outofthe reach ofchildren. Theblade issharp andcancause injury.   

160
7.
Align thepinonthe new cutter withthehole inthe product andinsert it.Tighten thecutter screw
 securely.

8.
Close thecutter coverasshown andpress itin until itclicks intoplace.
 Note:
Ifyou removed theoptional SpectroProofer, reinstallit.See theinstructions thatcame withthe
 SpectroProofer
fordetails oninstalling it.