Epson P 600 Manual

4.
Select Wi-FiSetup Wizard .
 Note:
Ifyou need todisable thewireless networktoset upyour product onanEthernet network,
 press
thedown arrow button, selectDisable Wi-Fi,and press theOK button. Thenfollow the
 instructions
onchanging toawired network connection.
 5.
Select thename ofyour wireless networkorenter thename manually.
 Note:
Toenter thewireless networknamemanually, selectOther Networks andselect the
 Network
(SSID)field.Usethedisplayed keypadtoenter yournetwork name.
 6.
Select thePassword...

7.
Press whenyoufinish entering yourpassword andselect Proceed .
 8.
Confirm thedisplayed networksettingsandselect OKtosave them.
 Note:
Ifyou need tochange asetting, pressthebackbutton.
 9.
Ifyou want toprint anetwork setupreport, selectPrint.(Otherwise, selectDone.)
 10.
Press the homebutton toexit.
 Your
product shouldnowbeconnected tothe network.
 Note:
Ifthe WiFi connection symboldoesnotappear liton the touch screen, youmay have selected
 the
wrong network nameorentered thepassword incorrectly....

You
canselect oneofthese modes tocommunicate withyour computer ordevice:
 Access
pointmode
 The
product itselfactsasthe network accesspointforupto4devices. Whenoperating inthis mode,
 your
product displays anAP connection symbolonthe LCD screen.
 Peer-to-peer
mode
 The
product communicates one-to-onewithanother Wi-FiDirect capable device.Whenoperating in
 this
mode, yourproduct displays aDirect orDconnection symbolonthe LCD screen.
 To
disconnect apeer-to-peer modeconnection, releasetheconnection...

You
seeascreen likethis:
 4.
Scroll downandselect Wi-FiDirect Setup.
 5.
Select Connection Setup.
 6.
Select Change Password andselect Yes.
 Note:
Ifyou have already connected devicesorcomputers toyour product viaWi-Fi Direct, theyare
 disconnected
whenyouchange thepassword.
 7.
Enter yournewWi-Fi Direct password.
 34 

Note:
Yourpassword mustbeatleast 8and nomore than22characters long.
 •
Press ortomove thecursor.
 •
Press tochange thecase ofletters.
 •
Press todelete theprevious character.
 •
Press toenter numbers andsymbols.
 •
Press toenter aspace.
 8.
Press whenyoufinish entering yourpassword.
 You
seeascreen likethis:
 9.
Scroll downtoview theSSID (Wi-Fi network name)andpassword.
 10.
Use your computer orwireless devicetoselect theWi-Fi network name(SSID) displayed onthe
 LCD
screen, thenenter thepassword...

Parent
topic:Wi-FiDirect ModeSetup
 Wi-Fi
Protected Setup(WPS)
 If
your network usesaWPS-enabled wirelessrouteroraccess point,youcanquickly connect your
 product
tothe network usingWi-FiProtected Setup(WPS).
 Note:
Tocheck ifyour router isWPS-enabled, lookforabutton labeled WPSonyour router oraccess
 point.
Ifthere isno hardware button,theremaybeavirtual WPSbutton inthe software forthe device.
 Check
yournetwork productdocumentation fordetails.
 Using
WPStoConnect toaNetwork
 Parent
topic:Wi-FiorWired...

5.
Follow theinstructions onthe LCD screen tocomplete WPSsetup.
 6.
Press the homebutton toexit.
 Your
product shouldnowbeconnected tothe network.
 Parent
topic:Wi-FiProtected Setup(WPS)
 Printing
aNetwork StatusSheet
 You
canprint anetwork statussheettohelp youdetermine thecauses ofany problems youmay have
 using
yourproduct onanetwork.
 1.
Press the homebutton, ifnecessary.
 2.
Press thesetupbutton.
 3.
Select Network Status.
 4.
Select Wi-Fi/Network Status.
 You
seeascreen likethis:
 Note:
Ifyou...

Changing
orUpdating NetworkConnections
 See
these sections tochange orupdate howyour product connects toanetwork.
 Accessing
theWeb Config Utility
 Changing
aUSB Connection toaWi-Fi Connection
 Changing
aWi-Fi Connection toaWired Network Connection
 Connecting
toaNew Wi-Fi Router
 Disabling
Wi-FiFeatures
 Parent
topic:Wi-FiorWired Networking
 Accessing
theWeb Config Utility
 You
canselect yourproducts networksettingsandconfirm itsoperating statususingaweb browser.
 You
dothis byaccessing yourproducts...

Changing
aWi-Fi Connection toaWired Network Connection
 If
you have already connected yourproduct toyour computer wirelessly, youcanchange toawired
 network
connection ifnecessary.
 1.
Disable yourproducts Wi-Fifeatures.
 2.
Connect oneendofan Ethernet networkcabletothe products LANport.
 3.
Connect theother endtoany available LANportonyour router oraccess point.
 4.
Uninstall yourproduct software.
 5.
Download andinstall yourproduct software fromtheEpson website.
 6.
Follow theon-screen instructions...

Disabling
Wi-FiFeatures
 You
may need todisable yourproducts Wi-Fifeatures ifyou change yournetwork connection typeor
 need
tosolve aproblem withyour network connection.
 Note:
Before disabling Wi-Fifeatures, makeanote ofyour products SSID(network name)and
 password,
andanynetwork settingsselected forthe Epson Connect servicesyoumay use.
 1.
Press the homebutton, ifnecessary.
 2.
Press the network statusicon.
 3.
Select Wi-FiSetup .
 You
seethisscreen:
 4.
Scroll downandselect Disable Wi-Fi.
 5.
Select...