Epson Monitor V4.30 User Manual

							Registering and deleting projectors for monitoring
11
Registering projectors using automatic search 
(Searching for and registering projectors that are 
located in the same segment)Procedures for automatic search
ProcedureA
Right-click in Grouping view and select "New" - "Projector 
(automatic search)".
The Create new projector (automatic registration) window will be 
displayed.
If Detail list view is displayed, select "New" - "Projector (automatic 
search)" from the Edit menu.
B
Click "Search".
Automatic searching will be carried out, and the names of the pro-
jectors that have been detected will be displayed.
If a projector does not appear in the list, use "Registration by spec-
ifying an IP address (Manual registration)". sp.17
•You can also carry out this operation by selecting New - Projector 
(automatic search) from the Edit menu.
•Projectors that are using a serial TCP/IP conversion adapter cannot be 
detected. 
						

							Registering and deleting projectors for monitoring
12
Procedures for registration
ProcedureA
Select the projector(s) to be registered from the displayed 
list, and then click "Edit".
The following window will be displayed.
Make the necessary settings while referring to the following table.
Display nameEnter the name of the projector(s) to be displayed in 
Grouping view or Detail list view.
Up to a maximum of 32 bytes can be entered. A space 
cannot be used as the first character.
Display iconSelect the icon(s) to be displayed in Grouping view or 
Detail list view.
Parent groupSelect when registering a projector in a group.
If no groups have been created, this cannot be selected.
s"Registering several projectors to a monitoring 
group all at once" p.18
Projector 
nameThis shows the name that has been registered on the 
projector.
IP addressThis shows the IP address for the registered projector.
Use Serial 
TCP/IP 
conversion 
adaptor.This cannot be selected when registering projectors 
using automatic search.
Port NumberThis cannot be selected when registering projectors 
using automatic search.
Monitor 
PasswordIf a Monitor Password has been set for the projector, be 
sure to enter the Monitor Password that has been set. If 
the correct password is not entered at this time, it will 
not be possible to monitor and control the projector 
even though it is registered.
DescriptionYou can enter some kind of memo about the projector. 
The details you enter here will be displayed at the 
projector properties.
Up to a maximum of 60 bytes can be entered.
MonitorSelect this when you want monitoring to start. 
						

							Registering and deleting projectors for monitoring
13
B
After entering the details, click "Register" to start the 
registration. When the message is displayed, click "OK".
To continue registering other projector(s), repeat Steps 1 and 2.
Projectors that have been registered using automatic search are 
searched for again by projector name each time EMP Monitor is 
started.
C
To end the registration operation, click   in the top-right 
corner of the window or click "Cancel".
The icon(s) of the projector(s) you registered will be displayed in 
Grouping view or Detail list view.
Refer to s"Monitoring window layout" p.21 for details on using 
the Grouping view and Detail list view.
Setting the range of addresses to do an automatic 
search and registration
Projectors that are using a serial TCP/IP conversion adapter cannot be 
detected.
Procedures for automatic search
ProcedureA
Right-click in Grouping view and select "New" - "Projector 
(automatic search)".
The Create new projector (automatic registration) window will be 
displayed.
If Detail list view is displayed, select New - Projector (automatic 
search) from the Edit menu.
B
Select the "Specify an address range and search" check box 
and then enter "Start address" and "End address" in the 
range. 
						

							Registering and deleting projectors for monitoring
14
C
Click "Search".
Automatic searching will be carried out, and the names of the pro-
jectors that have been detected will be displayed. 
						

							Registering and deleting projectors for monitoring
15
Procedures for registration
ProcedureA
Select the projector(s) to be registerd from the displayed list, 
and then click "Edit".
The following window will be displayed.
Make the necessary settings while referring to the following table.
Display nameEnter the name of the projector(s) to be 
displayed in Grouping view or Detail list view.
Up to a maximum of 32 bytes can be entered. A 
space cannot be used as the first character.
Display iconSelect the icon(s) to be displayed in Grouping 
view or Detail list view.
Parent groupSelect when registering a projector in a group.
If no groups have been created, this cannot be 
selected. s"Registering several projectors to a 
monitoring group all at once" p.18
Projector 
nameThis shows the name that has been registered on 
the projector.
IP addressThis shows the IP address for the registered 
projector.
Use Serial 
TCP/IP 
conversion 
adaptor.This cannot be selected when registering 
projectors using automatic search.
Port NumberThis cannot be selected when registering 
projectors using automatic search.
Monitor 
PasswordIf a Monitor Password has been set for the 
projector, be sure to enter the Monitor Password 
that has been set. If the correct password is not 
entered at this time, it will not be possible to 
monitor and control the projector even though it 
is registered.
DescriptionYou can enter some kind of memo about the 
projector. The details you enter here will be 
displayed at the projector properties.
Up to a maximum of 60 bytes can be entered.
MonitorSelect this when you want monitoring to start. 
						

							Registering and deleting projectors for monitoring
16
B
After entering the details, click "Register" to start the 
registration. When the message is displayed, click "OK".
To continue registering other projector(s), repeat Steps 1 and 2.
C
To end the registration operation, click  in the top-right 
corner of the window or click "Cancel".
The icon(s) of the projector(s) you registered will be displayed in 
Grouping view or Detail list view.
Refer to s"Monitoring window layout" p.21 for details on using 
the Grouping view and Detail list view. 
						

							Registering and deleting projectors for monitoring
17
Registration by specifying an IP address (Manual 
registration)
ProcedureA
Right-click in Grouping view and select "New" - "Projector 
(manual registration)".
The following window will be displayed.
If Detail list view is displayed, select "New" - "Projector (manual 
registration)" from the Edit menu.You can also carry out this operation by selecting New - Projector 
(manual registration) from the Edit menu.
B
Enter the IP address of the projector to be registered in the 
"IP address" box and then click "Search". When the message 
is displayed, click "OK".
If using a serial TCP/IP conversion adapter and cable to connect 
the projector, select Use Serial TCP/IP conversion adaptor. Enter 
the port number in Port Number and then click Search.
C
After searching is complete, enter the information for the 
projector to be registered while referring to the table below.Display nameEnter the name of the projector(s) to be displayed 
in Grouping view or Detail list view. Up to a 
maximum of 32 bytes can be entered. A space 
cannot be used as the first character.
Display iconSelect the icon(s) to be displayed in Grouping 
view or Detail list view.
Parent groupSelect when registering a projector in a group. If 
no groups have been created, this cannot be 
selected.
s"Registering several projectors to a 
monitoring group all at once" p.18
Projector 
nameThis shows the name that has been registered on 
the projector.
IP addressThis shows the IP address that you entered in step 
2.
Use Serial 
TCP/IP 
conversion 
adaptor.Select this if using a serial TCP/IP conversion 
adapter to connect the projector. 
						

							Registering and deleting projectors for monitoring
18
D
After entering the details, click "Register" to start the 
registration. When the message is displayed, click "OK".
The icon(s) of the projector(s) you registered will be displayed in 
Grouping view or Detail list view.
Registering several projectors to a monitoring group 
all at once
Projectors that have been registered can then be registered together into 
different groups so that they can be monitored and controlled together.
Furthermore, if you select one of the registered groups as the Parent 
group, monitoring and control operations can be carried out for all 
projectors in that Parent group.
A Parent group can be set for other parent groups, so that a hierarchical 
group arrangement can be created.
First, create the registration groups, and then register projectors into the 
groups that have been created.
Port NumberIf using a serial TCP/IP conversion adapter to 
connect the projector, enter the port number.
Monitor 
PasswordIf a Monitor Password has been set for the 
projector, be sure to enter the Monitor Password 
that has been set. If the correct password is not 
entered at this time, it will not be possible to 
monitor and control the projector even though it 
is registered. If using a serial TCP/IP conversion 
adapter to connect the projector, the Monitor 
Password security function cannot be used.
DescriptionYou can enter some kind of memo about the 
projector. The details you enter here will be 
displayed at the projector properties.
Up to a maximum of 60 bytes can be entered.
MonitorSelect this when you want monitoring to start. 
						

							Registering and deleting projectors for monitoring
19
ProcedureA
Right-click in Grouping view and select "New" - "Group".
The following window will be displayed.
Make the necessary settings while referring to the table below.
If Detail list view is displayed, select New - Group from the Edit 
menu.
You can also carry out this operation by selecting New - Group from the Edit menu.
B
When the setup is complete, click "Register" to start the 
registration. When the message is displayed, click "OK".
The icon(s) of the projector(s) you registered will be displayed in 
Grouping view or Detail list view.
C
Right-click the projector icon(s) to register to the group you 
have created in Grouping view or Detail list view, and select 
"Edit".
You can also carry out this operation by selecting Edit in the Edit 
menu.
D
In the Edit projector window, select the group name to use 
for registering in Parent group and then click "Change".
The status of the group registration will be displayed as an icon in 
Grouping view or Detail list view.
The registration details can also be checked using Projector list in 
the View menu.
Group nameEnter the name of the group to be displayed in 
Grouping view or Detail list view.
Up to a maximum of 32 bytes can be entered. A 
space cannot be used as the first character.
Display iconSelect the icon(s) to be displayed in Grouping 
view or Detail list view.
Parent groupThis selects the parent group. If no groups have 
been created, this cannot be selected.
MonitorSelect this to monitor all projectors that have 
been registered in the group. If this is not 
selected, the settings made when the individual 
projectors were registered will be used.
It cannot be set when creating a new group. 
						

							Registering and deleting projectors for monitoring
20
If the projector name or IP address changes after 
registrationFor projectors that have been registered manually
ProcedureA
Right-click on a projector icon in Grouping view or Detail list 
view and select "Monitoring disabled". Then right-click the 
projector icon again and select "Edit".
You can also carry out these operations by using the Edit menu.
B
If only the projector name has been changed, click "Search" 
in the Edit projector window that is displayed. If the IP 
address has been changed, enter the new IP address in the 
"IP address" box and then click "Search". When the message 
is displayed, click "OK".
C
When the display returns to the Edit projector window, click 
"Change".
For projectors that have been registered using automatic 
search
ProcedureA
Delete the projector(s) whose name or IP address has been 
changed in Grouping view or Detail list view.sp.20
B
Carry out automatic search to re-register the projector(s). 
sp.11
Cancelling (deleting) projector registrations
The registrations for projectors can be deleted if they are no longer 
required for monitoring or control using EMP Monitor.
Procedure
Right-click the icon for the projector or group that is to be deleted 
in Grouping view or Detail list view and select "Delete". When the 
message is displayed, click "OK".
More than one projector can be selected for deleting by selecting in 
Grouping view or Detail list view.
The methods of selecting more than one projector at the same time are as 
follow.
•If you select a group icon in Grouping view, all projectors that have 
been registered in that group will be deleted at the same time.
•Hold down the Ctrl key on the keyboard while clicking on the desired 
icons.
•Use drag and drop to select a range of desired icons.
You can also carry out this operation by selecting Delete in the Edit 
menu.