Epson EPL N3000T User Manual

98Using the PostScript Printer Software (Windows) Restore Defaults
Click this button to reset the settings on this sheet to their default 
values.
Device Options tab settings
Available printer memory (in KB)
Specify the amount of available printer memory. If the entered 
value does not match the actual amount of memory on the printer 
and printing problems occur, change the setting.
Available font cache (in KB)
Displays the amount of font cache memory available to Type 32 
fonts. The printer driver...

Using the PostScript Printer Software (Windows)99
4
4
4
4
4
4
4
4
4
4
4
4
Installable options
The settings available under Installable options enable you to 
specify whether certain options are installed into the printer, and 
if so, what they are. Use the Change setting for drop-down list to 
specify the details of the options installed.
Restore Defaults
Click this button to reset the settings on this sheet to their default 
values.
PostScript tab settings
PostScript output format
Specify the format for...

100Using the PostScript Printer Software (Windows) Job timeout
Specify the maximum number of seconds that can elapse for a 
print job to get from the computer to the printer before the printer 
stops trying to print the document. If you enter “0” (zero), the 
printer will continue trying to print indefinitely.
Wait timeout
Specify the maximum number of seconds that the printer will wait 
to get more PostScript information from the computer before the 
print job is automatically canceled. After the...

Using the PostScript Printer Software (Windows)101
4
4
4
4
4
4
4
4
4
4
4
4
If you select Tagged binary communications protocol, all data 
except for special control characters is sent in binary (8-bit) format. 
The binary format can be sent over parallel or serial 
communications ports and are faster then sending data in the 
ASCII format. The Pure binary data setting sends all data in pure 
binary format, which is the fastest format to print in, but that can 
be sent only over AppleTalk.
Send CTRL+D...

102Using the PostScript Printer Software (Windows)
Watermark tab settings
Select a watermark
Specify whether to use a watermark when printing. The options 
are None, CONFIDENTIAL, COPY, and DRAFT.
Edit
Click this button to edit the selected watermark. This button is not 
available when None is selected under Select a watermark.
New
Click this button to create a new watermark.
Delete
Click this button to delete the selected watermark. This button is 
not available when None is selected under Select a...

Using the PostScript Printer Software (Windows)103
4
4
4
4
4
4
4
4
4
4
4
4
1. Insert the printer software CD-ROM into your CD-ROM 
drive.
2. Click Start, then Settings, and finally Printers.
3. Double-click the Add Printer icon.
4. The Add Printer Wizard will be displayed. Follow the
on-screen instructions until the screen asking you to select the 
printer model is displayed.
5. Click Have Disk and specify the path to the appropriate INF 
file necessary for installation. If your CD-ROM drive is D:, the...

104Using the PostScript Printer Software (Windows) 6. Click OK once the following message appears.
“The server on which the XXX printer resides does not have the 
correct printer driver installed.”
7. Click Have Disk and specify the path to the appropriate INF 
file necessary for installation. If your CD-ROM drive is D:, the 
path will be D:\ADOBEPS\ENGLISH\WINNT4\PS_SETUP 
(change the drive letter as needed for your system).
8. Select the INF file for the version of the Windows operating 
system that...

Using the PostScript Printer Software (Windows)105
4
4
4
4
4
4
4
4
4
4
4
4
Paper Source
Select the paper source for your print job. The options are Auto 
Tray Select, MP Tray, Cassette 1, Cassette 2, Cassette 3, Manual 
Feed 1st Page, and Manual Feed EachPage. However, the actual 
paper sources that are available will differ according to the 
options installed.
Copy Count
Specify the number of copies to print.
Collate Copies
This check box appears only if more than one copy is specified for 
Copy Count....

106Using the PostScript Printer Software (Windows)
Advanced tab settings
EPSON EPL-N3000 PS3 Document Settings
Undo Changed Option/s
Click this button to undo all the changes that have been made to 
the settings. The settings return to their default values. This 
button is enabled only if one or more of the default values have 
been changed.
About Adobe PostScript Printer Driver
Click this button to view information on the currently installed 
PostScript printer driver.
Paper/Output
Paper Size
If you...

Using the PostScript Printer Software (Windows)107
4
4
4
4
4
4
4
4
4
4
4
4
Copy Count
If you specified the Copy Count setting on the Page Setup sheet, 
that setting is reflected here. To change this setting, enter the 
desired number of pages to print into the text box at the bottom 
of the dialog box. For more information on this setting, see “Copy 
Count” on page 105.
Graphic
Resolution
Select the resolution that you want to print in. The options are 
Fast and Quality. The Quality setting prints at a...