Epson EPL N3000T User Manual

88Using the Standard Printer Software 3. Follow the on-screen instructions.3. Double-click the English folder.
4. Double-click the Win9x folder.
5. Double-click the Epusbun.exe icon.
 

Using the PostScript Printer Software (Windows)89
4
4
4
4
4
4
4
4
4
4
4
4
Chapter 4
Using the PostScript Printer Software 
(Windows)
About the PostScript Printer Driver
The PostScript 3 printer driver provides you with the ability to 
print documents formatted for PostScript printers. Seventeen 
scalable fonts are included. IES (Intelligent Emulation Switch) 
and SPL (Shared Printer Language) support allow the printer to 
switch between the PostScript mode and other emulations as 
print data is received...

90Using the PostScript Printer Software (Windows)
Using the PostScript Printer Driver with 
Windows
Windows Me, 98, and 95 users
To print in the PostScript mode with Windows Me, 98, and 95, 
you will have to install the PostScript printer driver. See the 
appropriate sections below for installation instructions according 
to the interface that you are using to print.
Note:
The USB interface is not available for printing under Windows 95.
Installing the PostScript printer driver for the parallel...

Using the PostScript Printer Software (Windows)91
4
4
4
4
4
4
4
4
4
4
4
4
6. Select the INF file for the version of the Windows operating 
system that you are running and continue with the 
installation according to the on-screen instructions until the 
screen asking you to select the port the printer is connected to 
is displayed.
7. Select LPT1 as the port the printer is connected to, and then 
click Next. Follow the on-screen instructions for the rest of the 
installation.
8. When installation is...

92Using the PostScript Printer Software (Windows) 4. Select Search for best driver for your device (Recommended), 
and then click Next. 
5. Insert the printer software CD-ROM into your CD-ROM 
drive.
6. Select only the Specify a location check box, and then specify 
the following path on the CD-ROM. You can click Browse to 
select the path. If your CD-ROM drive is D:, the path will be 
D:\ADOBEPS\ENGLISH\WIN9X\PS_SETUP (change the 
drive letter as needed for your system).
7. Click Next to continue with...

Using the PostScript Printer Software (Windows)93
4
4
4
4
4
4
4
4
4
4
4
4
Installing the printer driver for the network interface
Follow these steps to install the PostScript printer driver for the 
network interface:
Note:
❏To connect using a network interface, you must install the optional 
interface card into the printer.
❏You must have at least 6 MB of free space on your hard disk drive 
to install the printer driver.
1. Insert the printer software CD-ROM into your CD-ROM 
drive.
2. Click Start, then...

94Using the PostScript Printer Software (Windows)
Notice for Windows Me, 98, and 95 Users
The printer may not print normally if the computer is connected 
to the printer via the parallel interface and the ECP mode is set. 
If this is the case, disable bi-directional support in the printer 
driver. To do so, display the printer’s Properties dialog box, click 
the Details tab, then click the Spool Settings button. In the Spool 
Settings dialog box that appears, Select Disable bi-directional 
support for...

Using the PostScript Printer Software (Windows)95
4
4
4
4
4
4
4
4
4
4
4
4
Collate
Select this check box to print multiple copies of the document in 
page order. If this check box is not selected, each page is printed 
out the specified number of times before the following page is 
printed.
Note:
If you select the Collate option in the printer driver, do not set the 
Collate option in the application itself.
Duplex
Select the desired duplex print style. Flip on long edge produces 
two-sided printouts that...

96Using the PostScript Printer Software (Windows)
Graphics tab settings
Resolution
Select the resolution that you want to print in. The options are 
Fast and Quality. The Quality setting prints at a higher resolution, 
but the printing time will be longer.
Print as a negative image
Select this check box if you want to print the document as a 
negative image. This feature prints by reversing the RGB or 
black-and-white values of the image, and is useful for printing 
black-and-white or coarse RGB images....

Using the PostScript Printer Software (Windows)97
4
4
4
4
4
4
4
4
4
4
4
4
Restore Defaults
Click this button to reset the settings on this sheet to their default 
values.
Fonts tab settings
Send TrueType fonts to printer according to the Font 
Substitution Table
Select this radio button to have the computer download TrueType 
fonts to the printer according to the settings in the Font 
Substitution Table. This setting can speed up printing.
Edit the Table
Click this button to edit the Font Substitution...