Epson EPL N3000DT User Manual
Have a look at the manual Epson EPL N3000DT User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
228Replacing the Consumable ProductNote: When the optional Stacker is installed, lower the Stacker after closing cover A. Fuser Unit Prepare a new fuser unit for replacement when you get a message informing you to do so. Handling precautions Note the following handling precautions before replacing the fuser unit: ❏Do not touch the surface of the fuser unit. Doing so may impair print quality. w Warning: ❏The fuser unit can be very hot if the printer has been in use. Turn the printer off and wait for 40 minutes until the temperature has subsided before replacing the fuser unit. ❏Keep the fuser unit out of the reach of children. Replacing the fuser unit Follow these steps to replace the fuser unit.
Replacing the Consumable Product229 8 8 8 8 8 8 8 8 8 8 8 8 1. Turn off the printer and unplug the power cord and the interface cable. Note: If the printer has been in use, wait at least 40 minutes until the fuser cools down before replacing it. 2. Lift the paper path lever.
230Replacing the Consumable Product 3. Open cover B. 4. Pull down the two levers at either side of the fuser unit.
Replacing the Consumable Product231 8 8 8 8 8 8 8 8 8 8 8 8 5. Remove the fuser unit slowly. Note: When removing the fuser unit, hold your hands as shown above, on the three tabs on both sides of the bottom of the fuser unit. 6. Slowly insert the new fuser unit.
232Replacing the Consumable Product 7. Lift up the two levers at either side of the fuser unit and push down the levers at both ends of the fuser unit to lock it. 8. Close cover B. 9. Reconnect the interface cable and power cord, and then turn on the printer.
Replacing the Consumable Product233 8 8 8 8 8 8 8 8 8 8 8 8 10. Press the Up or Down button several times until Reset Menu appears on the control panel, and then press the Enter button. 11. Press the Down button to display Reset Fuser Counter, and then press the Enter button. Cleaning the Printer The printer needs only minimal cleaning. If the printer’s outer case is dirty or dusty, turn off the printer and clean it with a soft, clean cloth moistened with a mild detergent.
234Replacing the Consumable Product c Caution: Never use alcohol or paint thinner to clean the printer cover; these chemicals can damage the components and the case. Be careful not to get water onto the printer mechanism or any electrical components. Cleaning the pickup roller If the paper jam occurs frequently, wipe the pickup roller with a clean dampened cloth. Follow the steps below. 1. Turn the printer off and open cover A slowly.
Replacing the Consumable Product235 8 8 8 8 8 8 8 8 8 8 8 8 2. Hold the handle of the imaging cartridge and pull out. Note: Place the cartridge on a clean, flat surface. 3. Remove the two pick up rollers by bending their tabs slightly outwards while sliding them off the spindles.
236Replacing the Consumable Product 4. With a clean damp cloth, wipe the pickup roller’s rubber parts. 5. Reattach the pickup rollers as shown below. Then, fit the hook in the concave part of the shafts to fix them. Note: Fit the convex parts of the pickup rollers in the concave parts of the shaft. rubber parts
Replacing the Consumable Product237 8 8 8 8 8 8 8 8 8 8 8 8 6. Reinstall the imaging cartridge. 7. Close cover A until it clicks shut. Transporting the Printer For long distances If you need to transport your printer for long distances, carefully repack it using the original box and packing materials. Follow these steps to repack your printer. 1. Turn off the printer. 2. Unplug the power cord from the electrical outlet. 3. Remove all installed options. For information on removing options, see the section under Installing Options.