Epson Emp Monitor V4.22 User Manual

20
Monitoring window layout
*1 When Temperature level display group view is set to On at 
Environment setup in the Tool menu, an icon indicating the internal 
temperature of the projector will be displayed on top of the projector 
icon. The default setting is Off.
*2 Check the following items.
 Check that the projectors power is turned on. 
 Check that the LAN cable is connected.
 Check that Network Monitoring is set to ON or Standby Mode 
is set to Network ON in the projectors configuration menu.
*3...

21
Monitoring window layout
Select the check box of the item you want to display.Click [OK].When all of the details of the item cannot be displayed 
in Detail list view, drag the boundary line on the 
right of the item name so that the view is extended to 
the desired width.
fSorting lists
You can sort detailed lists by using a specific row as a sort key, such as 
projector name order or IP address order.PROCEDUREClick the item name of the row you want to use as the sort 
key.
Searching for desired icons...

22
Monitoring window layout
Monitoring using the system tray
The projector statuses are always displayed as icons in the system tray, 
even when Grouping view or Detail list view is not always displayed, 
and the statuses can be checked by the icon patterns. 
When the configuration menus are set using the following operations, an 
icon appears in the system tray and the status can be monitored by means 
of the icons pattern.
PROCEDURE
Select Environment setup from the Tool menu.
The Environment setup...

23
Monitoring window layout
Displaying projectors with problem or warning statuses in a list
You can display a list of only the projectors which have a problem or 
warning status.PROCEDURESelect Warning and Error Projector list from the View 
menu.The following Warning and Error Projector list window will be 
displayed.The icon patterns and their meanings are explained below.
If you move the 
mouse pointer over 
the icon, details of 
the error and the 
remedy will be 
displayed.
If you double-click in 
a...

24
Monitoring window layout
*You can display the Replace Lamp warning at any time preset in 
Environment setup in the Tool menu.
Checking properties in detail
You can check the properties of groups and projectors in detail.
fDisplaying group properties
You can use either of the following methods to display the properties.
• Displaying the properties for all groups in Grouping view
Right-click in Grouping view and then select Property.
 Displaying properties for specified groups
Right-click an icon in...

25
Monitoring window layout
fDisplaying projector properties
Right-click on a projector icon in Grouping view or Detail list view 
and select Property.
Displaying and deleting logs
In your web browser, you can check a transmission log of content such as 
what has been controlled by the EMP Monitor, projector errors. You can 
delete logs once you have checked them.
fDisplaying logs
PROCEDURESelect Log - show from the View menu.
The web browser will open and the communication logs up until that 
time will...

26
Using the control functionsCarrying out control using control buttons
Click the icon of a projector to be controlled in Grouping view or Detail 
list view, and click a control button to enable control of only that selected 
projector.
You can also enable control of all selected projectors by selecting more 
than one projector in Grouping view or Detail list view and clicking a 
control button. The methods of selecting more than one projector at the 
same time are as follow.
 If you select a group icon...

27
Using the control functions
Carrying out control using a web browser (Web control)
You can use the computers web browser to change the configuration menu 
settings for projectors.PROCEDURE
Right-click on the icon of a projector to be controlled 
in Grouping view or Detail list view and select 
Web control.The web browser will open and the Web control 
window will be displayed.
Web control lets you set the same details as the configuration menu for the 
projector. Refer to the Projectors Users Guide...

28
Using the control functions
Carrying out control using timer settings
This is useful for carrying out certain control operations such as turning a 
projectors power on and off at specified times every day or every week.
Timer settings can be carried out either for a single projector only, or all at 
once for all projectors in a group.PROCEDURE
Select Timer - Timer Settings from the Tool 
menu.
The following window will be displayed and you can then 
check the timer setting status.
The details that can...

29
Using the control functions
fProcedures for new timer settings
When you click Add, the following window is 
displayed and the new timer settings are applied.
At Operation, you can carry out the operations of turning the 
power on and off and switching the input sources, similarly for 
the control buttons on the main window. If you set the input 
source switching, the projectors power will turn on at the timer 
start time even if it is not on at the time. Because of this, it is not 
necessary to make...