Epson Emp Monitor V4.22 User Manual

EMP Monitor V4.22 
Operation Guide 

1
Meanings of symbols used
The following table shows the symbols used in this manual, along with descriptions of what they mean.
Indicates something that may cause injury or damage to the projector.
Indicates information that is related to a topic or which may be useful to know.
Indicates a page where a related topic or a more detailed explanation is provided. Click on the page 
number to display that page.
[ (Name) ]Indicates the name of a projector port or a computer menu or item name.
Example:...

2
ContentsMeanings of symbols used 1Tasks that can be done using EMP Monitor 4Operating environment 5
Compatible computers ............................................................ 5
Installing EMP Monitor ............................................................ 5
Limitations imposed by a Windows Vista environment ........... 6
Before starting operations ....................................................... 6
Registering and deleting projectors for monitoring 7
Starting EMP Monitor...

3
Contents
Checking properties in detail ................................................. 24
Displaying group properties....................................................... 24
Displaying projector properties.................................................. 25
Displaying and deleting logs.................................................. 25
Displaying logs .......................................................................... 25
Deleting logs...

4
Tasks that can be done using EMP MonitorEMP Monitor lets you carry out operations such as checking the statuses of 
multiple EPSON projectors that are connected to a network at a computer 
monitor, and controlling the projectors from the computer.
Following are brief descriptions of the monitoring and control functions that 
can be carried out using EMP Monitor.•Registering projectors for monitoring and control
- Projectors on the network can be searched for automatically, and you can 
then select...

5
Operating environmentCompatible computersMacintosh computers cannot be used.
* Operations carried out at the computer may become slow depending on the 
number of projectors being managed. If this happens, use a computer with 
higher specifications.
* EMP Monitor cannot be used in environments which do not allow pings to 
be transmitted.
Installing EMP Monitor
When you are using Windows 2000/Windows NT4.0/Windows XP/
Windows Vista, you must have administrator authority in order to install 
EMP Monitor....

6
Operating environment
Limitations imposed by a Windows Vista environment
When using EMP Monitor under Windows Vista, note the following 
limitations.
 You must have administrator authority in order to use Register at 
startup on the Environment setup screen of EMP monitor.
sMonitoring using the system tray p.22
 Even after EMP monitor has been uninstalled, the settings and log 
information will remain on the hard disk. If this information is no longer 
required, you may delete the EMP Monitor V4.22...

7
Registering and deleting projectors for monitoringThis operation is carried out when starting EMP Monitor for the first time after 
it has been installed and when you would like to add projectors. Once a 
projector has been registered, the status for the projector will be displayed 
automatically each time EMP Monitor is started from that point onwards.Starting EMP Monitor
PROCEDURE
Click [Start] - [Programs] (or [All Programs]) - [EPSON 
Projector] - [EMP Monitor V4.22] in that order to start 
EMP...

8
Registering and deleting projectors for monitoring
Registering projectors using automatic search 
(Searching for and registering projectors that are located in the same segment)
PROCEDURE
fProcedures for automatic search
Right-click in Grouping view and select New - 
Projector (automatic search).
The Create new projector (automatic registration) window 
will be displayed.
layed, select New - Projector 
(automatic search) from the Edit menu.
Click [Search]. 
Automatic search will be carried out, and the...

9
Registering and deleting projectors for monitoring
fProcedures for registration
Select the projector(s) to be registered, and then click 
[Edit].
The following window will be displayed.
Make the necessary settings while referring to the following 
table.
After entering the details, click [Register] to start the 
registration. When the message is displayed, click 
[OK].
To continue registering other projector(s), repeat Steps 3 and 4.
Display name
Enter the name of the projector(s) to be displayed in...