Epson Brightlink 485wi Users Guide

3.
Select theinput source thatyouwant tocontrol inthe Sources Listbox. Youcanscroll through
 available
sourcesusingtheupand down arrows inthe box.
 4.
Tocontrol projection remotely,clicktheon-screen buttonsthatcorrespond tothe projectors remote
 control
buttons. Youcanscroll through buttonoptions atthe bottom ofthe screen.
 Note:
These on-screen buttonsdonot directly correspond tothe projectors remotecontrolbuttons:
 •
OK acts asthe Enter button
 •
Menu displays theConfiguration menu
 5.
Toview...

Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Selecting
theLanguage forthe Projector Menus
 Adjusting
theImage Height
 Image
Shape
 Resizing
theImage withtheWide andTele Buttons
 Adjusting
theImage Position
 Focusing
theImage
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Controlling
theVolume withtheVolume Buttons
 Projecting
aSlide...

1.
Connect thepower cordtothe projectors powerinlet.
 2.
Plug thepower cordintoanelectrical outlet.
 The
projectors powerlightturns orange. Thisindicates thattheprojector isreceiving power,butis
 not
yetturned on(itisin standby mode).
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 3.
Press thepower button onthe projector orthe remote controltoturn onthe projector.
 The
projector beepsandthepower lightflashes greenasthe projector warmsup.After about 30
 seconds,...

If
you donot see aprojected imagerightaway, trythe following:
 •
Turn onthe connected computerorvideo device.
 •
Insert aDVD orother video media, andpress theplay button (ifnecessary).
 •
Press theSource Searchbuttononthe projector orremote controltodetect thevideo source.
 Parent
topic:UsingBasicProjector Features
 Turning
Offthe Projector
 Before
turning offthe projector, shutdown anycomputer connected toitso you canseethecomputer
 display
duringshutdown.
 Note:
Turnoffthis product whennotinuse...

3.
Totransport orstore theprojector, makesurethepower lightisorange (butnotflashing), then
 unplug
thepower cord.
 Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen thepower
 light
isgreen orflashing orange.
 Parent
topic:UsingBasicProjector Features
 Related
references
 Projector
SetupSettings -Extended Menu
 Selecting
theLanguage forthe Projector Menus
 If
you want toview theprojectors menusandmessages inanother language, youcanchange the
 Language
setting.
 1.
Turn onthe...

Adjusting
theImage Height
 If
you areprojecting fromatable orother flatsurface, andtheimage istoo high orlow, youcanadjust
 the
image heightusingtheprojectors adjustablefeet.Make surethefeet have been installed.
 Caution:
Tiltingtheprojector willdistort theimage shape andmay cause difficulty focusing theimage.
 For
interactive use,make suretheprojector isnot tilted ananangle ofmore than±3º vertically or
 horizontally.

1.
Turn onthe projector anddisplay animage.
 2.
Toraise theimage, extend therear...

4.
Ifthe image istilted, rotate therear feettoadjust theirheight.
 If
the projected imageisunevenly rectangular, youneed toadjust theimage shape.
 Parent
topic:UsingBasicProjector Features
 Related
concepts
 Image
Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Image
Shape
 You
canproject anevenly rectangular imagebyplacing theprojector directlyinfront ofthe center ofthe
 screen
andkeeping itlevel. Ifyou place theprojector atan angle tothe screen, ortilted upordown, oroff
 to
the...

Correcting
ImageShape withtheKeystone Buttons
 You
canusetheprojectors keystonecorrection buttonstocorrect theshape ofan image thatis
 unevenly
rectangular onthe sides.
 Note:
Forinteractive use,make surethedegree ofhorizontal andvertical keystone correction isno more
 than
±6º.
 1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 2.
Press oneofthese keystone buttonsonthe control paneltodisplay theKeystone adjustment...

3.
Press akeystone buttononthe projectors controlpaneltoadjust theimage shape.
 Note:
Thehorizontal keystoneadjustment buttonsarelabeled WideandTele .
 After
correction, yourimage isslightly smaller.
 Note:
Ifthe projector isinstalled outofreach, youcanalso correct theimage shape usingthe
 Keystone
settingsinthe projector menus.
 Parent
topic:Image Shape
 79   

Related
references
 Projector
FeatureSettings -Settings Menu
 Correcting
ImageShape withQuick Corner
 You
canusetheprojectors QuickCorner settingtocorrect theshape andsize ofan image thatis
 unevenly
rectangular onallsides.
 1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 2.
Press theMenu button.
 3.
Select theSettings menuandpress Enter.
 4.
Select theKeystone settingandpress Enter.
 5.
Select theQuick Corner...