Epson Brightlink 485wi Users Guide

Wireless
LANMenu Settings
 Parent
topic:Wireless NetworkProjection
 Wireless
LANMenu Settings
 Note:
Seeyour projectors EasyMPNetworkProjection OperationGuidefordetails onselecting these
 settings.

Setting
 Options
 Description

Wireless
LANPower
 On
 Turns
onwireless LANsupport
 Off

Connection
Mode
 Quick
 Selects
thetype ofwireless
 connection:

Advanced

Quick
:lets you quickly connect
 to
one computer oruse the
 optional
EPSONQuickWireless
 Connection
USBkeytoconnect
 Advanced
:lets you connect...

Setting
 Options
 Description

IP
Settings
 DHCP
(On orOff )
 Selects
DHCPifyour network
 assigns
addresses automatically,
 IP
Address
 or
turns offDHCP soyou can
 Subnet
Mask
 enter
thenetworks IPaddress,
 subnet
mask,andgateway
 Gateway
Address
 address
asneeded
 SSID
Display
 On
 Selects
whether todisplay the
 SSID
onthe network standby
 Off

screen

IP
Address Display
 On
 Selects
whether todisplay theIP
 address
onthe network standby
 Off

screen

Parent
topic:Selecting...

Parent
topic:Wireless NetworkProjection
 Setting
UpWireless NetworkSecurity
 You
cansetupsecurity foryour projector touse onthe wireless network. Setupone ofthe following
 security
optionstomatch thesettings usedonyour network:
 •
WEP encryption
 •
WPA security
 Note:
Check withyour network administrator forguidance onentering thecorrect information.
 1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 4.
Select theSecurity menuandpress...

Parent
topic:Wireless NetworkProjection
 Wireless
SecurityMenuSettings
 Settings
onthe Security menuletyou select thetype ofsecurity andsecurity settingsthatmatch the
 network
youareconnecting theprojector to.
 Setting
 Options
 Description

Security
 WEP
andWPA types available
 Selects
thetype ofsecurity used
 on
the wireless network
 WEP
Encryption
 128Bit
 For
WEP security, selectsthe
 type
ofencryption coding
 64Bit

Format
 ASCII
 For
WEP security, selectsthe
 encryption
inputmethod:
 HEX

ASCII...

Parent
topic:Setting UpWireless NetworkSecurity
 Setting
UpProjector NetworkE-MailAlerts
 You
cansetupthe projector tosend youane-mail alertover thenetwork ifthere isaproblem withthe
 projector.

1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 4.
Select theMail menu andpress Enter.
 5.
Turn onMail Notification .
 6.
Enter theIPaddress forthe SMTP Server option.
 Note:
Donot use these addresses: 127.x.x.xor224.0.0.0...

8.
Choose anAddress field,enter thee-mail address, andselect thealerts youwant toreceive there.
 Repeat
foruptothree addresses.
 Note:
Youre-mail address canbeupto32 alphanumeric characterslong.
 9.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Note:
Ifa critical problem causesaprojector toshut down, youmay notreceive ane-mail alert.
 Network
Projector E-mailAlertMessages
 Parent
topic:UsingtheProjector onaNetwork
 Network...

4.
Select theOthers menuandpress Enter.
 5.
Enter uptotwo IPaddresses toreceive SNMPnotifications, using0to 255 foreach address field.
 Note:
Donot use these addresses: 127.x.x.xor224.0.0.0 through255.255.255.255 (wherexis a
 number
from0to 255).
 6.
Ifavailable, selectthePriority Gateway settingforyour network.
 7.
Ifyour network environment usesanAMX controller, turnonthe AMX Device Discovery settingto
 allow
theprojector tobe detected.
 8.
Ifyour network environment usesaCrestron RoomView...

Note:
Ifyou want touse aweb browser toselect settings whentheprojector isturned off,you need to
 adjust
theStandby Setupsettings inthe Extended menu.
 1.
Make suretheprojector isturned on.
 2.
Start yourwebbrowser onacomputer connected tothe network.
 3.
Type theprojectors IPaddress intothebrowsers addressboxand press thecomputers Enterkey.
 You
seetheWeb Control screen.
 4.
Toselect projector menusettings, selectthename ofthe menu andfollow theon-screen instructions
 to
select settings.
 5.
Tocontrol...

7
 Searches
forsources
 8
 Selects
thenetwork source
 9
 Selects
theUSB Display orUSB device source
 10
 Volume
buttoncontrols
 11
 Closed
Caption control
 6.
Select theicon corresponding tothe projector functionyouwant tocontrol.
 Parent
topic:UsingtheProjector onaNetwork
 Related
references
 Projector
SetupSettings -Extended Menu
 Crestron
RoomView Support
 If
you areusing theCrestron RoomView networkmonitoring andcontrol system, youcansetupyour
 projector
foruse onthe system. Crestron RoomView...

3.
Select Network Configuration andpress Enter.
 4.
Select theOthers menuandpress Enter.
 5.
SettheCrestron RoomView settingtoOn toallow theprojector tobe detected.
 6.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 7.
Turn offthe projector, thenturniton again toenable thesetting.
 Parent
topic:Crestron RoomView Support
 Controlling
aNetworked ProjectorUsingCrestron RoomView
 Once
youhave setupyour projector touse Crestron...