Epson Brightlink 485wi Users Guide

If
your image colorsappear incorrect, youmay need tochange theInput Signal settinginthe projectors
 Signal
menu.
 Parent
topic:Connecting toVideo Sources
 Related
references
 Input
Signal Settings -Signal Menu
 Connecting
toaComposite VideoSource
 If
your video source hasacomposite videoport,youcanconnect itto the projector usinganoptional
 RCA-style
videoorA/V cable.
 1.
Connect thecable withtheyellow connector toyour video sources yellowvideooutput port.
 2.
Connect theother endtothe projectors...

2.
Connect theother endtothe projectors S-Videoport.
 Parent
topic:Connecting toVideo Sources
 Connecting
toaVideo Source forSound
 You
canplay sound through theprojectors speakersystemifyour video source hasaudio output ports.
 If
you areprojecting videousingaComputer port,connect theprojector tothe video source usingan
 optional
stereomini-jack audiocableoran RCA audio cable.
 If
you areprojecting videousingtheVideo orS-Video port,connect theprojector tothe video source
 using
anRCA audio cable.
 1....

Parent
topic:Connecting toVideo Sources
 Connecting
toan External Computer Monitor
 If
you connected theprojector toacomputer usingaComputer port,youcanalso connect anexternal
 monitor
tothe projector. Thisletsyou seeyour presentation onthe external monitorevenwhen the
 projected
imageisnot visible.
 Note:
Monitors thatusearefresh rateless than 60MHz maynotbeable todisplay images correctly.
 1.
Make sureyourcomputer isconnected tothe projectors Computer port.Ifthere aretwo computer
 ports,...

2.
Locate theappropriate cabletoconnect yourexternal speakers, suchasastereo mini-jack-to-pin-
 jack
cable, oranother typeofcable oradapter.
 3.
Connect oneendofthe cable toyour external speakers asnecessary.
 4.
Connect thestereo mini-jack endofthe cable toyour projectors AudioOutport.
 Parent
topic:Projector Connections
 Connecting
aMicrophone
 You
canconnect amicrophone tothe projectors Micport toprovide audiosupport duringpresentations.
 Note:
Ifyou want tooutput audiofromthemicrophone...

Parent
topic:Projector Connections
 Connecting
toExternal USBDevices
 Follow
theinstructions inthese sections toconnect external USBdevices tothe projector.
 USB
Device Projection
 Connecting
aUSB Device orCamera tothe Projector
 Selecting
theConnected USBSource
 Disconnecting
aUSB Device orCamera FromtheProjector
 Parent
topic:Projector Connections
 USB
Device Projection
 You
canproject images andother content withoutusingacomputer orvideo device byconnecting anyof
 these
devices toyour projector:
 •...

2.
Connect theUSB cable (orUSB flash drive orUSB memory cardreader) intotheprojectors USB-A
 port
shown here.
 Note:
Donot connect aUSB huboraUSB cable longer than10feet (3m), orthe device maynot
 operate
correctly.
 3.
Connect theother endofthe cable (ifapplicable) toyour device.
 Parent
topic:Connecting toExternal USBDevices
 Related
topics
 Projecting
aSlide Show
 Selecting
theConnected USBSource
 You
canswitch theprojectors displaytothe source youconnected toaUSB-A port.
 1.
Make suretheconnected...

Connecting
toaDocument Camera
 You
canconnect theEPSON DC-06document cameratoyour projectors USB-Aporttoproject images
 viewed
bythe camera.
 Note:
Foradditional featuressupported bysoftware, connecttheEPSON DC-06document camerato
 your
computer insteadofthe projector. Youmay beable toconnect different EPSONdocument camera
 models
toyour projectors Computer port.Seethedocument camerasmanualforinstructions.
 1.
Locate theUSB cable thatcame withthedocument camera.
 2.
Connect theUSB cable tothe...

1.
Open thebattery coverasshown.
 2.
Insert thebatteries withthe+and –ends facing asshown.
 48   

3.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Setting Upthe Projector
 Installing
Batteriesinthe Pens
 Each
penuses oneAAbattery.
 1.
Open thebattery coverasshown.
 49   

2.
Insert thebattery withthe+and –ends facing asshown.
 3.
Replace thebattery coverandpress itdown untilitclicks intoplace.
 Parent
topic:Setting Upthe Projector
 50