Epson Aculaser M2010DN User Manual

Printing Tasks51
3. Click Stamp Function.
4. Select the Header/Footer check box, then click Header/Footer Settings.
5. Select the items from the drop-down list.
Note:
If you select Collate Number, the number of copies is printed.
6. Click OK.
Printing with an overlay
This function allows you to print a standard form or letterhead onto the original document.
Note:
❏This function is for Windows only.
❏The overlay function is available only when High Quality (Printer) is selected for the Printing Mode 
in...

Printing Tasks52
3. Click the Advanced Layout tab.
4. Select the Form Overlay check box.
5. Select Create Overlay Data, then click More Settings. The Create Form dialog box appears.
6. Type the form name in the Form Name box and its description in the Description box.
7. Select Foreground Document or Background Document to specify whether the overlay will 
be printed as foreground or background of the document.
8. Select the Assign to Paper Source check box to display the form name in the Paper Source...

Printing Tasks53
Printing an overlaid document
You can select the registered form data from the Paper Source drop-down list on the Basic Settings 
tab. For registering form data in the Paper Source, see step 8 in “Creating an overlay” on page 51. 
If overlay form data is not registered in the Paper Source or if you want to make detailed settings, 
follow the steps below.
1. Open the file to print with overlay data.
2. From the application, access the printer driver. For details, see “Accessing the...

Printing Tasks54
Printing Web Pages to Fit Your Paper Size
This function allows you to make Web pages fit to your paper size when printing. Install EPSON 
Web-To-Page from the printer software CD-ROM.
Note:
This software is for Windows only.
After you install EPSON Web-To-Page, the menu bar is displayed on the Microsoft Internet 
Explorer Toolbar. If it does not appear, select Toolbars from the View menu of Internet Explorer, 
and then select EPSON Web-To-Page.
 

Installing Options55
Chapter 3 
Installing Options
Optional Paper Cassette Unit
For details about the paper types and sizes that you can use with the optional paper cassette unit, 
see “Lower Paper Cassette Unit” on page 27. For specifications, see “Optional paper cassette unit” 
on page 158.
Handling precautions
Always pay attention to the following handling precautions before installing the option:
Be sure to lift the printer from the positions shown below.
w
Warning:
To lift the printer safely, you...

Installing Options56
D model
DN model
*OFF
c
Caution:
Make sure to unplug the power cord from the printer to prevent getting an electrical shock.
2. Carefully remove the optional paper cassette unit from its carton and place it where you intend 
to set up the printer.
Note:
❏Remove the protective materials from the unit.
❏Keep all protective materials in case you want to ship the optional paper cassette unit in the future.
 

Installing Options57
3. Carefully, grasp the printer at the position indicated below and lift it carefully.
4. Align the corners of the printer and the unit, then lower the printer gently onto the unit so that 
the connector and two pins on the top of the unit fit into the terminal and the holes on the 
bottom of the printer respectively.
Note:
You can install up to two optional paper cassette units. When you install two units, stack them up 
against each other, and then place the printer on them.
 

Installing Options58
5. Pull the paper cassette out from the unit.
6. Turn the lever to the position as shown below to lock the optional paper cassette unit.
7. Insert the paper cassette back into the unit.
8. Reconnect all the interface cables and the power cord.
 

Installing Options59
9. Plug the printer’s power cord into an electrical outlet.
10. Turn on the printer.
To confirm that the option is installed correctly, print a Status Sheet. See “Printing a Status Sheet” 
on page 90.
Note for Windows users:
If EPSON Status Monitor is not installed, you have to make settings manually in the printer driver. See 
“Making Optional Settings” on page 113.
Note for Macintosh users:
When you have attached or removed printer options, you need to delete the printer using...

Installing Options60
1. Turn the printer off and unplug the power cord.
*OFF
c
Caution:
Make sure to unplug the power cord from the printer to prevent getting an electrical shock.
2. Remove the screw on the option cover on the back of the printer using the screw driver.