Epson Aculaser M2010DN User Manual

About the PostScript Printer Driver141
Chapter 9 
About the PostScript Printer Driver
System Requirements
Printer hardware requirements
Note:
Add more memory modules into your printer if the amount of memory currently installed does not meet your 
printing needs.
Computer system requirements
Note:
To use the PostScript 3 printer driver with a USB interface, your computer must be Macintosh OS X 10.3.9 
or later.
Windows XP, XP x64, or 2000
There are no restrictions for these systems.
Mac OS X
Recommended...

About the PostScript Printer Driver142
Note:
To use binary data, Epson recommends that you use AppleTalk for the printer’s network connection. If you 
use a protocol other than AppleTalk for the network connection, you need to set Binary to On in the 
PS3 Menu on the control panel. For details about setting, see the Network Guide. If you use the printer with 
a local connection, you cannot use binary data.
Using the PostScript Printer Driver with Windows
To print in the PostScript mode, you will have to...

About the PostScript Printer Driver143
6. Click Have Disk and specify the following path for the CD-ROM. If your CD-ROM drive is D:, 
the path will be D:\ADOBEPS\ENGLISH\PS_SETUP
Then click OK.
Note:
Change the drive letter as needed for your system.
7. Select the printer, then click Next.
8. Follow the on-screen instructions for the rest of the installation.
9. When installation is done, click Finish.
Installing the PostScript printer driver for the USB interface
c
Caution:
Never use EPSON Status...

About the PostScript Printer Driver144
6. Select USB as the port the printer is connected to, then click Next.
7. Click Have Disk and specify the following path for the CD-ROM. If your CD-ROM drive is D:, 
the path will be D:\ADOBEPS\ENGLISH\PS_SETUP. Then click OK.
Note:
Change the drive letter as needed for your system.
8. Select the printer, then click Next.
9. Follow the on-screen instructions for the rest of the installation.
10. When installation is done, click Finish.
Installing the PostScript...

About the PostScript Printer Driver145
9. Click Have Disk in the Add Printer Wizard and specify the following path for the CD-ROM. If 
your CD-ROM drive is D:, the path will be D:\ADOBEPS\ENGLISH\PS_SETUP.
Then click OK.
Note:
Change the drive letter as needed for your system.
10. Select the printer and click Next.
11. Follow the on-screen instructions for the rest of the installation.
12. When installation is done, click Finish.
Accessing the PostScript printer driver
You can change the PostScript...

About the PostScript Printer Driver146
For Mac OS X users
Note:
Make sure that Printer Setup Utility (for Mac OS X 10.3 and 10.4) or Print Center (for Mac OS X 10.2) 
is not open.
1. Insert the printer software CD-ROM into your CD-ROM drive.
2. Double-click the CD-ROM icon.
3. Double-click Mac OS X, then double-click PS Installer.
Note:
For Mac OS X 10.2, if the Authenticate window appears, enter the user name and password for an 
administrator.
4. The Install EPSON PostScript Software screen appears,...

About the PostScript Printer Driver147
1. Open the Applications folder, open the Utilities folder, then double-click Printer Setup Utility 
(for Mac OS X 10.3 and 10.4) or Print Center (for Mac OS X 10.2).
The Printer List window appears.
2. Click Add in the Printer List window.
3. Select the protocol or the interface that you are using from the pop-up list.
Note for AppleTalk users:
Make sure to select AppleTalk. Do not select EPSON AppleTalk, because it cannot be used with the 
PostScript 3 printer...

About the PostScript Printer Driver148
Note for IP Printing users, USB or Bonjour (Rendezvous) users:
Select your printer from the Printer list, then select Show Info from the Printers menu. The Printer Info 
dialog box appears. Select Installable Options from the pop-up list, then make the necessary settings.
6. Confirm that your printer’s name is added to the Printer List. Then quit Printer Setup Utility 
(for Mac OS X 10.3 and 10.4) or Print Center (for Mac OS X 10.2).
Accessing the PostScript printer...

About the PCL6/PCL5 Printer Driver149
Chapter 10 
About the PCL6/PCL5 Printer Driver
About the PCL Mode
Hardware requirements
Your printer must meet the following hardware requirements to be able to use the PCL6/PCL5 
printer driver.
Memory requirements for using the PCL6/PCL5 printer driver are shown below. Install optional 
memory modules into your printer if the amount of memory currently installed does not meet your 
printing needs.
* Printing may not be possible with this amount of memory, depending...

About the PCL6/PCL5 Printer Driver150
For Windows Vista x64
For Windows XP or 2000
For Windows XP x64 or 2003 Server x64
Using the PCL6/PCL5 Printer Driver
To print in the PCL mode, you will have to install the printer driver. Consult the customer support 
in your region regarding how to get the printer driver.
Note:
The PCL6/PCL5 printer driver and EPSON Status Monitor cannot be used at the same time.
Minimum Recommended
ComputerIBM PC series or IBM compatible with Intel 
EM64T or AMD/64 CPUIBM PC...