Epson Aculaser CX16 User Manual

Editing/Deleting Speed Dial Destinations
Information registered as a speed dial destination can be edited or deleted.
Note:
Machine key operations cannot be used to edit/delete an FTP address or SMB address registered as a
speed dial destination. These addresses can be edited/deleted with Local Setup Program or EpsonNet
Config. For details, refer to the Reference Guide.
1. In the main screen (Scan mode), press the u or d key to select UTILITY, and then press the Select
key.
2. Press the u or d key to...

Note:
The addresses that can be registered as group dial destinations are limited to addresses registered as speed
dial destinations or as other group dial destinations.
1. In the main screen (Scan mode), press the u or d key to select UTILITY, and then press the Select
key.
2. Press the u or d key to select DIAL REGISTER, and then press the Select key.
3. Press the u or d key to select GROUP DIAL, and then press the Select key.
4. Use the keypad to type in the number (between 1 and 20) for the group...

4. Use the keypad to type in the number (between 1 and 20) for the group dial destination to be
edited/deleted, and then press the Select key.
The information currently registered for the group dial destination appears for about two seconds.
5. Press the u or d key to select EDIT to edit information or DELETE to delete the destination, and
then press the Select key.
If DELETE was selected, the settings are deleted, and the DIAL REGISTER menu appears again.
6. If desired, edit the group name, and then...

Selecting the Data Format
The data format for the scanned image can be selected.
1. In the main screen (Scan mode), press the u or d key to select the current data format setting, and
then press the Select key.
2. Press the u or d key to select TIFF, PDF or JPEG, and then press the Select key.
The main screen (Scan mode) appears again.
Note:
❏If BW Only was selected for the color setting, JPEG does not appear.
❏PDF data can be opened in Adobe Acrobat Reader.
❏TIFF files of images that have been scanned...

3. Press the u or d key to select MIX, TEXT or PHOTO, and then press the Select key.
The main screen (Scan mode) appears again.
Selecting the Scan Density
1. In the main screen (Scan mode), press the u or d key to select the current scan quality setting, and
then press the Select key.
2. Press the u or d key to select DENSITY, and then press the Select key.
3. Press the l or r key to select the desired scan density, and then press the Select key.
As the indicator is moved to right, the density becomes...

Specifying the Subject
Specify the subject used when sending scan data as e-mail.
1. In the main screen (Scan mode), press the u or d key to select SUBJECT, and then press the Select
key.
2. Use the keypad to type in the subject name, and then press the Select key.
The main screen (Scan mode) appears again.
Note:
❏For details on entering/editing text, refer to the Facsimile User’s Guide.
❏To erase the specified subject name, press the Back key.
Deleting a Queued Transmission Job
The list of jobs queued...

Chapter 7
Replacing Consumables
Replacing Consumables
Note:
❏Failure to follow instructions as outlined in this manual could result in voiding your warranty.
❏If an error message (TONER OUT, P/U LIFE END, etc.) appears, print out the configuration page,
and then check the status of the other consumables. For details on the error messages, refer to “Error
Messages” on page 191. For details on printing the configuration page, refer to “Printing a
Configuration Page” on page 157.
About Toner Cartridges
Your...

Toner Cartridge Type Toner Cartridge Part Number
High-Capacity Toner Cartridge - Yellow (Y) 0554
High-Capacity Toner Cartridge - Magenta (M) 0555
High-Capacity Toner Cartridge - Cyan (C) 0556
Note:
For optimum print quality and performance, use only the corresponded TYPE genuine Epson toner
cartridges.
Keep toner cartridges:
❏In their packaging until you’re ready to install them.
❏In a cool, dry location away from sunlight (due to heat).
❏The maximum storage temperature is 35˚C (95˚F) and the maximum...

Replacing a Toner Cartridge
Note:
Be careful not to spill toner while replacing a toner cartridge. If toner spills, immediately wipe it off with a
soft, dry cloth.
If MACHINE SETTING/TONER OUT STOP in the UTILITY menu is set to ON, the message TONER OUT/
CHANGE X TONER (where “X” indicates the color of the toner) appears when the toner cartridge is
nearly empty. Follow the steps below to replace the toner cartridge.
Note:
If MACHINE SETTING/TONER OUT STOP in the UTILITY menu is set to OFF, printing can...

6. Open the front cover.
Note:
Before opening the front cover, open Tray 1 if it is not already open.
7. Check that the toner cartridge to be replaced has been moved to the front.
Note:
You can identify the toner cartridge by the color of the handle.
AcuLaser CX16 Series     Printer / Copier / Scanner User’s Guide
Replacing Consumables     120