Epson AcuLaser C4200DNPC6 User Manual

Using the Control Panel241
7
7
7
7
7
7
7
7
7
7
7
7
Selects the pitch (the horizontal spacing) of the font in fixed pitch, 
measured in cpi (characters per inch). You can also choose 
proportional spacing.
Condensed
Turns condensed printing on or off.
T. Margin
Sets the distance from the top of the page to the baseline of the 
first printable line. The distance is measured in inches. The 
smaller the value, the closer the printable line is to the top.
Text
Sets the page length in lines. For this option,...

242Using the Control Panel
Specifies whether the printer performs a 
carriage-return/line-feed (CR-LF) operation whenever the 
printing position goes beyond the right margin. If you select 
Off, 
the printer does not print any characters beyond the right margin 
and does not perform any line wrapping until it receives a 
carriage-return character. This function is handled automatically 
by most applications.
Auto LF
If you select  Off, the printer does not send an automatic line-feed 
(LF) command with...

Using the Control Panel243
7
7
7
7
7
7
7
7
7
7
7
7
* Depending on whether Letter (62) or A4 (66) paper has been selected.
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, 
measured in cpi (characters per inch). You can also choose 
proportional spacing.
Condensed
Turns condensed printing on or off.
Item Settings (default in bold)
FontCourier, Prestige, Roman, Sans Serif, Script, 
Orator S, OCR A, OCR B
Pitch 10, 12, 15 cpi, Prop. 
Condensed Off, On
T....

244Using the Control Panel
T. Margin
Sets the distance from the top of the page to the baseline of the 
first printable line. The distance is measured in inches. The 
smaller the value, the closer the printable line is to the top.
Text
Sets the page length in lines. For this option, a line is assumed to 
be 1 pica (1/6 inch). If you change the Orientation, Page Size, or 
T. Margin settings, the page length setting automatically returns 
to the default for each paper size.
CG Table
Use the character...

Using the Control Panel245
7
7
7
7
7
7
7
7
7
7
7
7
If you select Off, the printer does not send an automatic line-feed 
(LF) command with each carriage-return (CR). If  On is selected, a 
line-feed command is sent with each carriage-return. Select  On if 
your text lines overlap.
Bit Image
The printer is able to emulate the graphics densities set with the 
printer commands. If you select  Dark, the bit image density is 
high, and if you select  Light, the bit image density is low.
If you select...

246Using the Control Panel
*1Depends on whether Letter (63) or A4 (67) paper has been selected.
*2Depends on whether Letter (1) or A4 (2) paper has been selected.
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, 
measured in cpi (characters per inch). You can also choose 
proportional spacing.
Code Page
Selects the character tables. Character tables contain the 
characters and symbols used by different languages. The printer 
prints text based on the...

Using the Control Panel247
7
7
7
7
7
7
7
7
7
7
7
7
Sets the distance from the top of the page to the baseline of the 
first printable line. The distance is measured in inches. The 
smaller the value, the closer the printable line is to the top.
Text
Sets the page length in lines. For this option, a line is assumed to 
be 1 pica (1/6 inch). If you change the Orientation, Page Size, or 
T. Margin settings, the page length setting automatically returns 
to the default for each paper size.
Auto CR
Specifies...

248Using the Control Panel
If you select 
BarCode, the printer converts bit images to bar codes 
by automatically filling in any vertical gaps between dots. This 
produces unbroken vertical lines that can be read by a bar code 
reader. This mode will reduce the size of the image being printed, 
and may also cause some distortion when printing bit image 
graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
CharacterSet
Selects character table 1 or 2.
Status and Error...

Using the Control Panel249
7
7
7
7
7
7
7
7
7
7
7
7
The printer is canceling all print jobs in the printer memory, 
including jobs the printer is currently receiving or printing. This 
message appears when the +Cancel Job  button has been 
pressed down for more than 2 seconds.
Cancel Print Job
The printer is canceling the current print job. This message 
appears when the  +Cancel Job  button has been pressed and 
released within 2 seconds.
Cancel Print Job (by host)
The print job is canceled at the...

250Using the Control Panel
To clear the jam, see Paper Jam C A B on page 376.
Check Paper Size
The paper size setting is different from the size of paper loaded 
in the printer. Check to see if the 
correct size of paper is loaded in 
the specified paper source.
To clear this error, select  Clear Warning from the control panel’s 
Reset Menu . See How to access the control panel menus on page 
214 for instructions.
Check Paper Type
The paper loaded in the printer does not match the paper type 
setting in...