Epson AcuLaser C4200DNPC6 User Manual

Using the PostScript Printer Driver211
6
6
6
6
6
6
6
6
6
6
6
6
4. Click your printer. The Create button appears.
Note:
If your computer is connected to more than one AppleTalk zone, 
click the AppleTalk zone your printer is connected to in the 
AppleTalk Zones  list.
5. Click  Create.
Accessing the PostScript printer driver
To control your printer and change its settings, use the printer 
driver. The printer driver allows you to easily make all the print 
settings, including paper source, paper size,...

212Using the PostScript Printer Driver
Using Balloon Help
Follow the steps below to use Balloon Help.
1. Click the Help menu, then select  Show Balloons.
2. Place your cursor over the item that you need help with.  Information on that item is displayed inside a floating 
balloon.
Changing the printer setup settings
You can change or update the printer setup settings according to 
the options installed in your printer.
Note for Mac OS X users:
When  Super Fine  is selected as the resolution, the...

Using the PostScript Printer Driver213
6
6
6
6
6
6
6
6
6
6
6
6
For Mac OS 9 users
Follow the steps below to change the settings.
1. Access the printer driver.
2. Click the Printing menu, then select Change Setup.
3. Change the settings using the pop-up menus.
 

214Using the Control Panel
Chapter 7 
Using the Control Panel
Using the Control Panel Menus
You can use the printer’s control panel to access a variety of 
menus that allow you to check the status of consumable products, 
print status sheets, and make printer settings. This section 
describes how to use the control panel menus, and when it is 
appropriate to make printer settings using the control panel.
When to make control panel settings
In general, printer settings can be made from the printer...

Using the Control Panel215
7
7
7
7
7
7
7
7
7
7
7
7
1. When the printer’s Ready light is on, press the  Enter 
button to access the control panel menus.
2. Use the  uUp  and  dDown  buttons to scroll through the 
menus.
3. Press the  Enter button to view the items in a menu. 
Depending on the menu, the LCD panel displays an item and 
the current setting separated ( YYYY=ZZZZ), or only an item 
( YYYY ).
4. Use the  uUp  and  dDown  buttons to scroll through the items, 
or press the  lBack  button to...

216Using the Control Panel
6. Press the 
NStart/Stop  button to exit the control panel menus.
Control Panel Menus
New :delete
 unnecessary i
nformation/
 use c
aution
 with
 the
 icon
 and b
uttonPress the  uUp  and  dDown  buttons to scroll through the menus. 
The menus and menu items appear in the order shown below.
Note:
Some menus and items appear only  when a corresponding optional 
device is installed or an appr opriate setting has been done.
Information Menu
New :c onfirm t
he
 product
 s...

Using the Control Panel217
7
7
7
7
7
7
7
7
7
7
7
7
*1 Available only when the jobs are stored by using the Quick Print Job feature.
*2 Available only when Form Overlay data exists.
*3 Available only when the NetworkI/F setting in Network Menu  is set to On.
*4 Available only when an optional Type B interface card is installed and the 
printer has been turned on when the  AUX I/F setting is set to  On.
*5 Available only when the printer is connected to a USB device with D4 support 
and has been turned on...

218Using the Control Panel
*6 Available only when an optional P5C module is installed.
Status Sheet, AUX Status Sheet, PS3 Status Sheet
Prints a sheet showing the current printer settings and installed 
options. These sheets can be useful to confirm whether options 
have been installed correctly.
Reserve Job List
Prints a list of reserved print jobs stored on the optional Hard Disk 
Drive.
Form Overlay List
Prints a list of the form overlays stored on the optional Hard Disk 
Drive.
Network Status Sheet...

Using the Control Panel219
7
7
7
7
7
7
7
7
7
7
7
7
Displays the amount of toner left in the toner cartridges, and the 
remaining service life of the photoconductor unit, as shown 
below:
Total Pages
Displays the total number of pages printed by the printer.
Color Pages
Displays the total number of pages printed in color by the printer.
B/W Pages
Displays the total number of pages printed in black-white by the 
printer.
Tray Menu
New  :confirm the
 product
 specification a
nd
 quote
 the i
nformation f...

220Using the Control Panel
*1 Default setting varies according to the country of purchase.
*2 Available only when the optional paper cassette unit is installed.
MP Tray Size
Select your paper size from this menu.
When Auto is selected, all kinds of available paper size are 
detected automatically. Select the proper size to use other size 
paper.
LC1 Size/LC2 Size/LC3 Size/LC4 Size
Displays the paper size loaded in the standard and optional paper 
cassettes.
MP Type
Lets you set the paper type loaded in...