Home > Epson > Printer > Epson AcuLaser C3800N User Manual

Epson AcuLaser C3800N User Manual

Here you can view all the pages of manual Epson AcuLaser C3800N User Manual. The Epson manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 181

Using the Control Panel181
EPSON AcuLaser C3800 Users Guide
*5When the Get IPAddress setting is changed from Panel or PING to Auto, the panel setting values are 
saved. When Auto is changed to Panel or PING, the saved setting values are displayed. 192.168.192.168 
if the settings are not made from the panel.
USB I/F
Allows you to activate or deactivate the USB interface.
USB SPEED
Allows you to select the operation mode of USB interface. Selecting HS is recommended. 
Select FS if HS does not work on your...

Page 182

Using the Control Panel182
EPSON AcuLaser C3800 Users Guide
*1After this item is changed, the setting value takes effect after a warm boot or after the power is turned on 
again. While it is reflected in the Status Sheet and EJL read-back, the actual change takes effect after a 
warm boot or after the power is turned on again.
*2Available only when USB Host is set to ON.
USB Host
Enables you to print directly from a USB memory via a USB Host interface.
Device Detection
Specifies whether or not to detect...

Page 183

Using the Control Panel183
EPSON AcuLaser C3800 Users Guide
FontSource
Sets the default font source.
Font Number
Sets the default font number for the default font source. The available number depends on 
the settings you made.
Pitch
Specifies the default font pitch if the font is scalable and of fixed-pitch. You can select from 
0.44 to 99.99 cpi (characters per inch), in 0.01-cpi increments. This item may not appear 
depending on the Font Source or Font Number settings.
Height
Specifies the default font...

Page 184

Using the Control Panel184
EPSON AcuLaser C3800 Users Guide
PS3 Menu
This menu allows you to make settings which affect the printer when it is in the PS3 mode.
*Available only when connected via Network interface.
Error Sheet
When you select On, the printer prints out an error sheet when an error occurs in the PS3 
mode or when the PDF file you tried to print is not a supported version.
Coloration
Allows you to select the color printing or black-and-white printing mode.
Image Protect
The printer employs...

Page 185

Using the Control Panel185
EPSON AcuLaser C3800 Users Guide
Text Detection
When you select On, the text file is converted to a PostScript file when printing. This setting 
is available only when you select PS3 in the Emulation Menu.
PDF Page Size
Specifies the paper size when you send the PDF file directory from a computer or some 
other device. If Auto is selected, the paper size is determined based on the size of the first 
page that is printed.
Password Config Menu
This menu allows you to restrict...

Page 186

Using the Control Panel186
EPSON AcuLaser C3800 Users Guide
ESCP2 Menu
This menu allows you to make settings which affect the printer when it is in the ESC/P 2 
emulation mode.
* Depending on whether Letter (62) or A4 (66) paper has been selected.
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi 
(characters per inch). You can also choose proportional spacing.
Condensed
Turns condensed printing on or off.
Item Settings (default in bold)...

Page 187

Using the Control Panel187
EPSON AcuLaser C3800 Users Guide
T. Margin
Sets the distance from the top of the page to the baseline of the first printable line. The 
distance is measured in inches. The smaller the value, the closer the printable line is to the 
top.
Text
Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If 
you change the Orientation, Page Size, or T. Margin settings, the page length setting 
automatically returns to the default for each paper size....

Page 188

Using the Control Panel188
EPSON AcuLaser C3800 Users Guide
ZeroChar
Specifies whether the printer prints a slashed or unslashed zero.
FX Menu
This menu allows you to make settings which affect the printer when it is in the FX 
emulation mode.
* Depending on whether Letter (62) or A4 (66) paper has been selected.
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi 
(characters per inch). You can also choose proportional spacing.
Condensed...

Page 189

Using the Control Panel189
EPSON AcuLaser C3800 Users Guide
T. Margin
Sets the distance from the top of the page to the baseline of the first printable line. The 
distance is measured in inches. The smaller the value, the closer the printable line is to the 
top.
Text
Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If 
you change the Orientation, Page Size, or T. Margin settings, the page length setting 
automatically returns to the default for each paper size....

Page 190

Using the Control Panel190
EPSON AcuLaser C3800 Users Guide
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
I239X Menu
The I239X mode emulates IBM® 2390/2391 Plus commands.
These settings are available only when the printer is in the I239X mode.
*1Depends on whether Letter (63) or A4 (67) paper has been selected.
*2Depends on whether Letter (1) or A4 (2) paper has been selected.
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch,...
Start reading Epson AcuLaser C3800N User Manual

Related Manuals for Epson AcuLaser C3800N User Manual

All Epson manuals