Epson AcuLaser C2900DN User Manual

Installing the Feed Roll Unit in the Standard 250-Sheet Tray
1. Align the new feed roll unit with the groove on the axle.
2. Insert the feed roll unit into the axle until it snaps. The protrusions fit completely into the slots and
the roller hook reseats into the groove on the axle.
3. Load paper in the standard 250-sheet tray, and then insert the standard 250-sheet tray into the
printer and push until it stops.
Important:
Do not use excessive force on the tray. Doing so could damage the tray or the...

Ordering Supplies
Certain consumables and routine maintenance items need to be ordered occasionally. Each supply
includes installation instructions on the box.
Consumables
Important:
Use of consumables/periodical replacement parts not recommended by Epson can impair machine
quality and performance. Use only consumables/periodical replacement parts recommended by Epson.
Product Name Product Code
TONER CARTRIDGE(YELLOW) 0627
TONER CARTRIDGE(MAGENTA) 0628
TONER CARTRIDGE(CYAN) 0629
TONER CARTRIDGE(BLACK)...

Important:
This printer is designed to provide the most stable performance and print quality when used with the
consumables recommended by Epson. Not using consumables recommended for this machine degrades
the performance and printing quality of the printer. You could also incur charges if the machine breaks
down. To receive customer support and achieve the optimum performance of the printer, be sure to use
consumables recommended by Epson.
Storing Print Media
To avoid potential paper feeding problems...

Managing the Printer
Checking or Managing the Printer with EpsonNet Config
When the printer is installed in a TCP/IP environment, you can use EpsonNet Config to check the
printer status, the remaining volume of consumables, and the paper loaded in this printer. You can
also use EpsonNet Config to configure printer settings.
Note:
When using the printer as a local printer, you cannot use EpsonNet Config. For details about checking
the status of a local printer, refer to “Checking Printer Status with...

The following procedure uses Microsoft® Windows® XP as an example.
1. Click start — All Programs — EPSON — Status Monitor — Activate Status Monitor.
The Select Printer window appears.
2. Click the name of the desired printer from the list.
3. The Printer Status window appears.
For details about the functions of Status Monitor, refer to the online Help.
Conserving Supplies
You can change several settings in your print driver to conserve toner cartridge and paper.
The following descriptions use the PCL 6...

When printing color data, which has been converted by using ICC profile on an application, with the
Color (Auto) setting, the data is printed by color even if it seems to be black and white data on the
monitor. In that case, Total Impression is increased.
When doing 2-sided printing, a blank page may be inserted automatically depending on the settings of
the application. In this case, the blank page is counted as one page.
For information about the individual meter, see “Billing Meters” on page 105.
Use...

2. Remove any paper in the output tray and slide the output tray extension inside the printer.
3. Pull the standard 250-sheet tray out of the printer about 200 mm. Hold the standard 250-sheet tray
with both hands, and remove it from the printer.
4. Lift the printer and move it gently.
Note:
If you move the printer over a long distance, remove the toner cartridges from the printer to prevent
toner from spilling, and pack the printer inside a box.
Epson AcuLaser C2900 Series     User’s Guide
Maintenance...

5. Insert the standard 250-sheet tray into the printer, and push until it stops.
Important:
Do not use excessive force on the tray. Doing so could damage the tray or the inside of the printer.
6. Adjust the color registration before using your printer.
See Also:
“Adjusting Color Registration” on page 182
Removing Options
If the printer location needs to be changed or the printer and print media handling options need to be
shipped to a new location, all print media handling options must be removed from...

2. Turn the screw on the control board cover counterclockwise, and open the cover.
Note:
Loosen the screw. You do not need to remove the screw.
3. Push the clips on both sides of the slot outward.
4. Hold the memory module and pull it straight out.
Epson AcuLaser C2900 Series     User’s Guide
Maintenance     229
 

5. Close the control board cover, and turn the screw clockwise.
6. Turn on the printer.
Removing the Optional Duplex Unit
1. Turn off the printer and disconnect the power cord.
2. Push the side button to open the front cover.
Epson AcuLaser C2900 Series     User’s Guide
Maintenance     230