Epson AcuLaser C2800DN User Manual

AcuLaser C2800 Series Users Guide
Using the Control Panel181
uuuu Toner Low
This message indicates that the imaging cartridge for the indicated color is near the end of its 
service life. Prepare a new imaging cartridge. This message appears only if genuine EPSON 
imaging cartridges are used.
Warming Up
The printer is warming up the fuser to be ready to print.
Worn Fuser
This message indicates that the fuser unit is near the end of its service life. You can continue to print 
until the Replace Fuser...

AcuLaser C2800 Series Users Guide
Using the Control Panel182
Printing and Deleting Reserve Job Data
Print jobs stored on the printer’s memory using the Re-Print Job and Verify Job options of the 
Reserve Job function can be printed and deleted using the control panel’s Quick Print Job Menu. 
Jobs saved using the Confidential Job option can be printed from the Confidential Job Menu. 
Follow the instructions in this section.
Note:
You need to keep sufficient RAM disk capacity in order to use the Reserve...

AcuLaser C2800 Series Users Guide
Using the Control Panel183
Using the Confidential Job Menu
Follow the steps below to print or delete Confidential Job data.
1. Make sure the LCD panel displays Ready or Sleep, then press the Enter button to access the 
control panel menus.
2. Press the dDown button repeatedly until ConfidentialJobMenu appears on the LCD panel, 
then press the Enter button.
3. Use the dDown or uUp button to scroll to the appropriate user name, then press the Enter 
button.
4. Enter your...

AcuLaser C2800 Series Users Guide
Using the Control Panel184
Printing a Status Sheet
To confirm the current status of the printer, and that the options are installed correctly, print a 
status sheet using the printer’s control panel.
Follow the steps below to print a status sheet.
1. Turn on the printer. The LCD panel shows Ready or Sleep.
2. Press the Enter button three times. The printer prints a status sheet.
3. Confirm that the information about the installed options is correct. If the options are...

AcuLaser C2800 Series Users Guide
Using the Control Panel185
Adjusting Color Registration
If you transported your printer over a long distance, you need to adjust the color registration for 
possible misalignment.
Follow the steps bellow to adjust the alignment of the color registration.
1. Make sure the LCD panel displays Ready, then press the Enter button to access the control 
panel menus.
Note:
You may not be able to adjust the color registration when the printer is in the sleep mode or when any...

AcuLaser C2800 Series Users Guide
Using the Control Panel186
Using the Reset menu
Selecting Reset from the control panel’s Reset Menu stops printing, clears the print job being 
received from the active interface, and clears errors that may have occurred at the interface.
Follow the steps below to use the Reset Menu.
1. Press the Enter button to access the control panel menus. 
2. Press the dDown button several times until Reset Menu appears on the LCD panel, then press 
the Enter button.
3. Press the...

AcuLaser C2800 Series Users Guide
Installing Options187
Chapter 9 
Installing Options
Optional Paper Cassette Unit
For details about the paper types and sizes that you can use with the optional paper cassette unit, 
see “Standard lower paper cassette and optional paper cassette unit” on page 38. For specifications, 
see “Optional paper cassette unit” on page 268.
Handling precautions
Always pay attention to the following handling precautions before installing the option:
The printer weighs about 28 kg...

AcuLaser C2800 Series Users Guide
Installing Options188
1. Remove the interface cover on the back of the printer.
2. Turn the printer off and unplug the power cord and all the interface cables.
*OFF
c
Caution:
Make sure to unplug the power cord from the printer to prevent getting an electrical shock.
3. Carefully remove the optional paper cassette unit from its carton and place it where you intend 
to set up the printer.
Note:
❏Make sure you have the two screws packed with the optional paper cassette...

AcuLaser C2800 Series Users Guide
Installing Options189
❏Remove the protective materials from the unit.
❏Keep all protective materials in case you want to ship the optional paper cassette unit in the future.
4. Carefully, grasp the printer at the position indicated below and lift it carefully with two people.
5. Align the corners of the printer and the unit, then lower the printer gently onto the unit so that 
the four pins on top of the unit fit into the holes on the bottom of the printer.
 

AcuLaser C2800 Series Users Guide
Installing Options190
6. Remove the standard lower cassette from the printer.
7. Fasten the optional paper cassette unit to the printer with two of the provided screws.
8. Reinsert the standard lower cassette into the printer.
9. Reconnect all the interface cables and the power cord.
10. Reattach the interface cover.
11. Plug the printer’s power cord into an electrical outlet.
12. Turn on the printer.
To confirm that the option is installed correctly, print a Status...