Epson AcuLaser C2600DTN User Manual
Have a look at the manual Epson AcuLaser C2600DTN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Troubleshooting361 11 11 11 11 11 11 11 11 11 11 11 11 3. Push the latch on cover A to the left and open the cover until it stops. 4. If the optional Duplex Unit is not installed, gently pull out any sheets of paper. Be careful not to tear the jammed paper.
362TroubleshootingIf the optional Duplex Unit is installed, lift up the Duplex Unit. Hold it and gently pull out any sheets of paper. Be careful not to tear the jammed paper. w Warning: Be careful not to touch the fuser, which is marked CAUTION HIGH TEMPERATURE, or the surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be very hot. If you must touch one of these areas, open cover A and B, then wait 30 minutes to allow the heat to subside before doing so. 5. Close cover A.
Troubleshooting363 11 11 11 11 11 11 11 11 11 11 11 11 6. Pull out the standard paper cassette. Then pull the cassette upward to remove it from the printer. 7. Gently pull out any sheets of paper that have fed part way into the printer.
364Troubleshooting 8. Reinsert the paper cassette. 9. Open the MP tray and reload the paper. Jam A, E, C2 (cover A, E, and optional paper cassette) Follow the steps below to clear paper jams at cover A, C, and the optional paper cassette. 1. Remove all paper that is loaded on the MP tray.
Troubleshooting365 11 11 11 11 11 11 11 11 11 11 11 11 2. Close the MP tray Note: Close the expansion trays, if needed, before closing the MP tray. 3. Push the latch on cover A to the left and open the cover until it stops.
366Troubleshooting 4. If the optional Duplex Unit is not installed, gently pull out any sheets of paper. Be careful not to tear the jammed paper. If the optional Duplex Unit is installed, lift up the Duplex Unit. Hold it and gently pull out any sheets of paper. Be careful not to tear the jammed paper.
Troubleshooting367 11 11 11 11 11 11 11 11 11 11 11 11 w Warning: Be careful not to touch the fuser, which is marked CAUTION HIGH TEMPERATURE, or the surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be very hot. If you must touch one of these areas, open cover A and B, then wait 30 minutes to allow the heat to subside before doing so. 5. Close cover A. 6. Open cover E.
368Troubleshooting 7. Gently pull out any sheets of paper that have fed part way into the printer. 8. Close cover E. 9. Pull out the optional paper cassette. Then pull the cassette upward to remove it from the optional paper cassette unit.
Troubleshooting369 11 11 11 11 11 11 11 11 11 11 11 11 10. Gently pull out any sheets of paper that have fed part way into the printer. 11. Reinsert the paper cassette into the optional paper cassette unit. 12. Open the MP tray and reload the paper.
370Troubleshooting Printing a Status Sheet To confirm the current status of the printer, and that the options are installed correctly, print a status sheet using the printer’s control panel or the printer driver. To print a status sheet from the printer’s control panel, see Printing a Status Sheet on page 281. To print a status sheet from the printer driver, for Windows, see Printing a status sheet on page 98, or for Macintosh, see Printing a status sheet on page 174. Operational Problems The Ready light does not turn on The printer does not print (Ready light off) Cause What to do The power cord may not be properly plugged into the electrical outlet.Turn off the printer, check the power cord connections between the printer and the electrical outlet, then turn the printer back on. The electrical outlet may be controlled by an outside switch or an automatic timer.Make sure that the switch is turned on or plug another electrical device into the outlet to check whether the outlet is operating properly. Cause What to do