Epson AcuLaser C2600DTN User Manual
Have a look at the manual Epson AcuLaser C2600DTN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Installing Options291 8 8 8 8 8 8 8 8 8 8 8 8 w Warning: Two people should lift the printer by the correct positions. 4. Open cover E.
292Installing Options 5. Fasten the optional paper cassette unit to the printer with the provided plates and screws. 6. Close cover E. 7. Secure the unit to the left side of the printer with the remaining plate and screw.
Installing Options293 8 8 8 8 8 8 8 8 8 8 8 8 8. Reconnect the interface cable and power cord, then turn the printer on. To confirm that the option is installed correctly, print a Status Sheet. See Printing a Status Sheet on page 370. Note for Windows users: If EPSON Status Monitor 3 is not installed, you have to make settings manually in the printer driver. See Making Optional Settings on page 98. Note for Macintosh users: When you have attached or removed printer options, you need to delete the printer using Print Setup Utility (for Mac OS X 10.3), Print Center (for Mac OS X 10.2 or below), or Chooser (for Mac OS 9), and then re-register the printer. Removing the optional paper cassette unit Turn off the printer and perform the installation procedure in reverse. Duplex Unit For specifications or details about the paper types and sizes that you can use with the Duplex Unit, see Duplex Unit on page 414. Installing the Duplex Unit Follow the steps below to install the optional Duplex Unit. 1. Turn the printer off and unplug the power cord and interface cable.
294Installing Options 2. Open the MP tray. 3. Push the latch on cover A to the left and open the cover.
Installing Options295 8 8 8 8 8 8 8 8 8 8 8 8 4. Remove the two screws securing the cover MP. 5. Remove the cover MP from cover A. 6. Take the Duplex Unit out of its package.
296Installing Options 7. Fit the hooks on cover A into the notches on the Duplex Unit.
Installing Options297 8 8 8 8 8 8 8 8 8 8 8 8 8. Pull the upper part of the Duplex Unit upward and secure the Duplex Unit to the printer with the two provided screws. 9. Close cover A and the MP tray. To confirm that the option is installed correctly, print a Status Sheet. See Printing a Status Sheet on page 370. Note for Windows users: If EPSON Status Monitor 3 is not installed, you have to make settings manually in the printer driver. See Making Optional Settings on page 98. Note for Macintosh users: When you have attached or removed printer options, you need to delete the printer using Print Setup Utility (for Mac OS X 10.3), Print Center (for Mac OS X 10.2 or below), or Chooser (for Mac OS 9), and then re-register the printer.
298Installing Options For Windows, see Printing with the Duplex Unit on page 94, For Macintosh, see Printing with the Duplex Unit on page 171 for information about duplex printing. Removing the Duplex Unit Turn off the printer and perform the installation procedure in reverse. Hard Disk Drive The optional Hard Disk Drive allows you to expand the printer’s input buffer when the Ethernet interface is used, and gives you additional memory for graphics, form data, and faster multi-page, multi-output sorting. Installing the Hard Disk Drive Follow the steps below to install the Hard Disk Drive. c Caution: Before you install the Hard Disk Drive, be sure to discharge any static electricity by touching a grounded piece of metal. Otherwise, you may damage static-sensitive components. w Warning: Be careful when working inside the printer as some components are sharp and may cause injury.
Installing Options299 8 8 8 8 8 8 8 8 8 8 8 8 1. Turn the printer off and unplug the power cord. 2 . R e m o v e t h e f o u r s c r e w s f r o m t h e c o v e r o n t h e b a c k s i d e o f t h e printer.
300Installing Options 3. Hold the cover with both hands and pull it toward you to remove it. w Warning: Be careful when touching the circuit board inside the back side cover since some parts may be very hot. 4. Identify the connection socket for the Hard Disk Drive.