Epson AcuLaser C1100DN User Manual

							Setting Up Your Printer on a Network141
5
5
5
5
5
5
5
5
5
5
5
5
2. Insert the CD-ROM, type the appropriate drive and folder 
names in which the printer driver for clients is located, then 
click OK.
When installing drivers in Windows XP, 2000, or Server 2003, 
“Digital Signature is not found.” may appear. Click Yes (for 
Windows 2000) or Continue Anyway (for Windows XP or 
Server 2003) and continue installing.
The folder name differs depending on the OS being used.
3. Select the name of the printer, click OK, then follow the 
on-screen instructions.
Client’s OS Folder Name
Windows Me, 98, or 95 \\WIN9X
Windows 2000 or XP \\WINXP_2K
Windows NT 4.0 \\WINNT40
 
						

							142Setting Up Your Printer on a Network
For Macintosh
Sharing the printer
This section describes how to share the printer on an AppleTalk 
network.
The computers on the network can share the printer that is 
directly connected to one of them. The computer that is directly 
connected to the printer is the print server, and the other 
computers are the clients which need permission to share the 
printer with the print server. The clients share the printer via the 
print server.
For Mac OS X users
Use the Printer Sharing setting, which is a standard feature of Mac 
OS X 10.2 or later.
This feature is not available with Mac OS X 10.1.
See your operating system’s documentation for details.
For Mac OS 9 users
Setting up your printer as a shared printer
Follow the steps below to share a printer connected directly to 
your computer with other computers on an AppleTalk network.
1. Turn on the printer.
2. Select Chooser from the Apple menu, then click your printer 
icon. Select USB port in the “Select a printer port” box on the 
right, then click Setup. The Printer Setup dialog box appears.
 
						

							Setting Up Your Printer on a Network143
5
5
5
5
5
5
5
5
5
5
5
5
Note:
Make sure On is selected under Background Printing.
3. Under Printer Sharing Set Up, click Printer Sharing Setup.
4. The Printer Sharing dialog box appears. Select the Share this 
Printer check box, then type the printer name and password 
information as needed.
5. Click OK to apply the settings.
6. Close Chooser.
 
						

							144Setting Up Your Printer on a Network
Accessing the shared printer
Follow the steps below to access your printer from another 
computer on the network.
1. Turn on your printer.
2. On each computer from which you want to access the printer, 
select Chooser from the Apple menu. Click your printer icon, 
then select the name of the shared printer in the “Select a 
printer port” box on the right. You can only select from the 
printers connected to your current AppleTalk zone.
Note:
Make sure On is selected under Background Printing.
3. Click Setup, enter the password for the printer, then click OK. 
The Printer Setup dialog box appears. Under Printer Sharing 
Set Up, click Shared Printer Information.
 
						

							Setting Up Your Printer on a Network145
5
5
5
5
5
5
5
5
5
5
5
5
4. The following type of message appears if the client has fonts 
that are unavailable on the print server.
5. Click OK to close the message.
6. Close Chooser.
 
						

							146Installing Options
Chapter 6
Installing Options
Optional Paper Cassette Unit
For details about the paper types and sizes that you can use with 
the optional paper cassette unit, see “Optional paper cassette 
unit” on page 25. For specifications, see “Optional 500-Sheet 
Paper Cassette Unit” on page 242.
Note:
Load paper with the printable surface facing up.
Handling precautions
Always pay attention to the following handling precautions 
before installing options:
The printer weighs about 28 kg (62 lb). One person should never 
attempt to lift or carry it alone. Two people should carry the 
printer, lifting it from the positions shown below.
 
						

							Installing Options147
6
6
6
6
6
6
6
6
6
6
6
6
w
Warning:
If you lift the printer incorrectly, you could drop it and cause 
injury.
Installing the optional paper cassette unit
Follow the steps below to install the optional paper cassette unit.
1. Turn the printer off and unplug the power cord and interface 
cable.
2. Take the optional paper cassette unit out of the cardboard box, 
then remove the protective materials in the cassette.
3. Place the optional paper cassette unit where you intend to set 
up the printer. Then, put the printer onto the optional paper 
cassette unit. Align each of the printer’s corners with those of 
the unit, then lower the printer until it rests securely on the 
unit.
w
Warning:
Two people should lift the printer by the correct positions.
 
						

							148Installing OptionsNote:
The printer and optional paper cassette unit are heavy so it is 
necessary to carry them separately when you transfer them.
4. Remove the paper cassette from the optional paper cassette 
unit.
5. Push up the fixing tabs inside the optional paper cassette unit, 
then turn them in a clockwise direction to fix the unit and the 
printer together.
6. Reinsert the paper cassette into the optional paper cassette 
unit.
 
						

							Installing Options149
6
6
6
6
6
6
6
6
6
6
6
6
7. Reconnect the interface cable and power cord, then turn the 
printer on.
8. To confirm that the option is installed correctly, print a Status 
Sheet. See “Printing a Status Sheet” on page 193.
Note for Windows users:
If EPSON Status Monitor 3 is not installed, you have to make settings 
manually in the printer driver. See “Making Optional Settings” on page 
62.
Note for Macintosh users:
When you have attached or removed printer options, you need to delete 
the printer using Print Setup Utility (for Mac OS X 10.3), Print 
Center (for Mac OS X 10.2 or below), or Chooser (for Mac OS 9), 
and then re-register the printer.
Removing the optional paper cassette unit
Perform the installation procedure in reverse.
 
						

							150Installing Options
Duplex Unit
For specifications or details about the paper types and sizes that 
you can use with the Duplex Unit, see “Duplex Unit” on page 243.
Installing the Duplex Unit
Follow the steps below to install the optional Duplex Unit.
1. Turn the printer off and unplug the power cord and interface 
cable. Then, remove the connector cover.
2. Open cover E.