Epson AcuLaser C1100DN User Manual

Functions of the Control Panel251
B
B
B
B
B
B
B
B
B
B
B
B
Color Pages
Displays the total number of pages printed in color by the printer.
B/W Pages
Displays the total number of pages printed in black-white by the 
printer.
Status Menu
This menu is displayed only when a warning occurs. You can see 
the errors by entering SelecType mode. When multiple warnings 
occur, the   marks are displayed at the end of a warning message. 
Enter SelecType mode to see other warning messages.
Tray Menu
This menu allows...

252Functions of the Control Panel
MP Tray Size
Select your paper size from this menu.
LC Size
Displays the paper size loaded in the standard and optional lower 
cassettes.
MP Type
Lets you set the paper type loaded in the MP tray.
LC Type
Lets you select the paper type loaded in the standard and optional 
lower cassettes.
Setup Menu
This menu allows you to make various basic configuration 
settings related to paper sources, feeding modes, and error 
handling. You can also use this menu to select the LCD...

Functions of the Control Panel253
B
B
B
B
B
B
B
B
B
B
B
B
Lang
Specifies the language displayed on the LCD panel and that 
printed on the status sheet.
MP Mode
This setting determines whether the MP tray has the highest or 
lowest priority when Auto is selected as the Paper Source setting 
in the printer driver. When Normal is selected as the MP Mode, 
the MP tray has the highest priority as the paper source. If you 
select Last, the MP tray has the lowest priority.
Size Ignore
If you want to ignore a...

254Functions of the Control Panel
Reset Menu
This menu allows you to cancel printing and reset the printer 
settings.
Clear Warning
Clears warning messages that show errors except for these that 
occur from consumable products or mandatory-replacement 
parts.
Clear All Warnings
Clears all warning messages that appear on the LCD panel.
Reset
Stops printing and clears the current job received from the active 
interface. You may want to reset the printer when there is a 
problem with the print job itself...

Functions of the Control Panel255
B
B
B
B
B
B
B
B
B
B
B
B
Change Toner C/M/Y/K
Replace the indicated toner cartridge. See “Toner Cartridge” on 
page 161 for details.
Reset Fuser Counter
Reset the fuser unit life when you replace the fuser unit.
Parallel Menu
These settings control communication between the printer and 
the computer when using the parallel interface.
Parallel I/F
Allows you to activate or deactivate the parallel interface.
Bi-D
Allows you to specify the bidirectional communication mode....

256Functions of the Control Panel
USB Menu
These settings control communication between the printer and 
the computer when using the USB interface.
*1 After this item is changed, the setting value takes effect after a warm boot 
or after the power is turned on again. While it is reflected in the Status Sheet, 
the actual change takes effect after a warm boot or after the power is 
turned on again.
*2 Displayed only when a USB external device is connected. The USB Config 
setting is set to No...

Functions of the Control Panel257
B
B
B
B
B
B
B
B
B
B
B
B
USB I/F
Allows you to activate or deactivate the USB interface.
USB SPEED
Allows you to select the operation mode of USB interface. 
Selecting HS is recommended. Select FS if HS does not work on 
your computer system.
Buffer Size
Determines the amount of memory to be used for receiving data 
and printing data. If Maximum is selected, more memory is 
allocated for receiving data. If set to Minimum is selected, more 
memory is allocated for printing...

258Functions of the Control Panel
Network Menu
See the Network Guide for each setting.
Note:
This menu may not be available depending on the printer model.
Printer Adjust Menu
Enter the Support Mode by pressing the d Down button while 
turning the printer on, to make the Printer Adjust Menu appear.
Note:
This menu is a special function. You don’t have to change it for ordinary 
use.
Normal
Adjust the density for normal paper. The setting becomes darker 
as the value increases.
Item Settings (default in...

Functions of the Control Panel259
B
B
B
B
B
B
B
B
B
B
B
B
HighQlty
Adjust the density for high quality paper. The setting becomes 
darker as the value increases.
Thick
Adjust the density for thick paper. The setting becomes darker as 
the value increases.
SemiThk
Adjust the density for semi-thick paper. The setting becomes 
darker as the value increases.
Card
Adjust the density for cards. The setting becomes darker as the 
value increases.
Envelope
Adjust the density for envelopes. The setting becomes...

260Functions of the Control Panel
Feed Offset2
Adjust the vertical position in which to star printing. The position 
moves lower on the sheet as the value increases. This setting is 
used when printing on the backside of paper for duplex printing.
Scan Offset2
Adjust the horizontal position in which to start printing. The 
position moves to the right of the sheet as the value increases. This 
setting is used when printing on the backside of paper for duplex 
printing.
Calibration
Executes the process...