Epson 4880 C Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Reset Counters 4415.6  Reset Counters5.6.1  Reset Paper Ejection Switching/PG Switching 
Counter†
Procedure
1. Turn the printer power on.
2. Start up the adjustment program and select [Reset Paper Ejection 
Switching/PG Switching Counter].
3. Click [Run] to clear the Paper Ejection Switching/PG Switching 
Counter.
4. Click [Finish].Figure 5-100. Reset Paper Ejection Switching/PG Switching Counter 
Screen
5.6.2  Reset PF Motor Counter†...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Reset Counters 4425.6.3  Reset ASF Counter†
Procedure
1. Turn the printer power on.
2. Start up the adjustment program and select [Reset ASF Counter].
3. Click [Run] to clear the ASF Counter.
4. Click [Finish].
Figure 5-102. Reset ASF Counter Screen
5.6.4  Reset When CR Unit Change†
Procedure
1. Turn the printer power on.
2. Start the adjustment program and select [Reset When CR Unit 
Change].
3. Click the [Run] button to clear theMotor...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Reset Counters 4435.6.5  Reset When Cleaning Unit Change†
Procedure
1. Turn the printer power on.
2. Start the adjustment program and select [Reset When Cleaning Unit 
Change].
3. Click the [Run] button to clear the Cleaning Unit change counter.
4. Click the [Finish] button.
Figure 5-104. Reset When Cleaning Unit Change
5.6.6  Reset When Printhead Change†
Procedure
1. Turn the printer power on.
2. Start the adjustment program and select...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Installing Firmware 4445.7  Installing FirmwareFirmware for the printer is written to the Flash ROM on the Main Board. Use 
the following procedure to write the firmware to the Flash ROM when the Main 
Board is replaced or the firmware needs to be updated.†
Tool requiredFirmware Update Tool„Supported OS: Windows 98, Me, 2000, XP
„Port: USB
†Procedure
1. Turn off both the printer and the computer, and connect the printer to 
the computer with...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Installing Firmware for SP 4400 (4-color model) after replacing Main Board with New one 4455.8  Installing Firmware for SP 4400 (4-color 
model) after replacing Main Board with 
New one
The firmware preinstalled on the main board provided as ASP is for 8-color 
model. If you have replaced the main board of 4-color model with a new one, 
you need to delete the preinstalled firmware and install firmware for 4-color 
model.†
Tool...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Device ID Setting 4465.9  Device ID Setting†
Procedure
1. Turn the printer ON, and start the Adjustment Program.
2. Select the printer name.
3. Click the icon on the top left of the window.
4. Select [Port Check on Connected Printer].
5. The pop up screen to confirm the port is displayed. Click [Yes].
6. Click [Start].
Figure 5-108. [Select Printer Name] Screen Figure 5-109. [Port Check on Connected Printer] Screen	


Stylus Pro...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Writing MAC Address 4475.10  Writing MAC AddressThe MAC address of this printer is recorded on the Flash ROM of the main 
board. When replacing the main board, make sure to write the MAC address to 
the new board as follows.†
Procedure
1. Turn on the power of the printer.
2. Start the adjustment program, and select [Set MAC address].
3. Key in the MAC address and press [Enter].
4. Press [Next].
5. Press [Confirm], and check that the same MAC...

CHAPTER
6
MAINTENANCE 

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision C
Maintenance Overview 4496.1  OverviewThis chapter describes maintenance operations that are required during 
servicing.
Most servicing/maintenance of this printer will need to be done by visiting the 
site where the printer will actually be used by the customer (on-site service). 
Carefully observe the following cautions and perform the servicing/
maintenance in such a way that no damage is done to the product or 
customers work environment.

„...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision C
Maintenance Overview 4506.1.1  Product Life Information†
Work Life Preservation Items
This printer does not have periodic replacement parts that require periodic 
replacement before reaching the end of the product work life.
However, if this printer continues to be used after the product work life, 
service call errors will be displayed before part failures occur and 
messages will be presented to advise part replacement. (This excludes the...