Epson 4880 C Service Manual
Here you can view all the pages of manual Epson 4880 C Service Manual. The Epson manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 401
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4015.3.10 Auto Uni-d AdjustmentPerforms Auto Uni-D Adjustment with the Multi Sensor. When the adjustment pattern is printed, the adjustment; from scanning the pattern to correcting, is executed automatically. The pattern is printed at PG=1.2, and the correction value is automatically copied for other PG settings.† Paper Used„ Size: 17 „ Type: Enhanced Matte Roll Paper † Procedure 1. Turn the printer on. 2. Start...
Page 402
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4025.3.11 Multi Sensor Adjustment for Auto Nozzle CheckThis adjustment prints a special pattern and scans it with the Multi Sensor, and then the difference between the position (drive pulses of the CR/PF Motors) read by the Multi Sensor and the standard value is registered as the correction value information. In the beginning, the reading position for the primary scan direction and secondary scan direction is adjusted....
Page 403
![Page 403
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4034. Selecting [Print Check Pattern] and clicking the [Run] button will print
the confirmation pattern.
Two patterns are printed (dot missing/no dot missing) and read by the
Multi Sensor, and then the results are printed along with the patterns.
5. Click the [Finish] button.
Figure 5-43. Check Pattern (Dot Missing)Figure 5-44. Check Pattern (No Dot Missing)
[PG=1.2]
[Count] MK : 8
[Position] MK : ( 1, 2) ,
( 1,...](http://img.usermanuals.tech/thumb/23/62441/w300_d_1490956832-epson-4880-c-service-manual_d-402.png "Page 403
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4034. Selecting [Print Check Pattern] and clicking the [Run] button will print
the confirmation pattern.
Two patterns are printed (dot missing/no dot missing) and read by the
Multi Sensor, and then the results are printed along with the patterns.
5. Click the [Finish] button.
Figure 5-43. Check Pattern (Dot Missing)Figure 5-44. Check Pattern (No Dot Missing)
[PG=1.2]
[Count] MK : 8
[Position] MK : ( 1, 2) ,
( 1,...")
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4034. Selecting [Print Check Pattern] and clicking the [Run] button will print the confirmation pattern. Two patterns are printed (dot missing/no dot missing) and read by the Multi Sensor, and then the results are printed along with the patterns. 5. Click the [Finish] button. Figure 5-43. Check Pattern (Dot Missing)Figure 5-44. Check Pattern (No Dot Missing) [PG=1.2] [Count] MK : 8 [Position] MK : ( 1, 2) , ( 1,...
Page 404
![Page 404
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4045.3.12 Skew Check†
Paper Used„
Size: 17
„
Type: Enhanced Matte Roll Paper
†
Procedure
1. Turn the printer on.
2. Start the adjustment program and select [Skew Check].
3. When the [Run] button is clicked, the paper will be ejected and the
paper skew amount will be measured by the Multi Sensor.
4. After the skew check value is displayed, click the [OK] button.
5. Click the [Finish] button and properly set the paper.Figure...](http://img.usermanuals.tech/thumb/23/62441/w300_d_1490956832-epson-4880-c-service-manual_d-403.png "Page 404
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4045.3.12 Skew Check†
Paper Used„
Size: 17
„
Type: Enhanced Matte Roll Paper
†
Procedure
1. Turn the printer on.
2. Start the adjustment program and select [Skew Check].
3. When the [Run] button is clicked, the paper will be ejected and the
paper skew amount will be measured by the Multi Sensor.
4. After the skew check value is displayed, click the [OK] button.
5. Click the [Finish] button and properly set the paper.Figure...")
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4045.3.12 Skew Check† Paper Used„ Size: 17 „ Type: Enhanced Matte Roll Paper † Procedure 1. Turn the printer on. 2. Start the adjustment program and select [Skew Check]. 3. When the [Run] button is clicked, the paper will be ejected and the paper skew amount will be measured by the Multi Sensor. 4. After the skew check value is displayed, click the [OK] button. 5. Click the [Finish] button and properly set the paper.Figure...
Page 405
![Page 405
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4055.3.13 Platen Position AdjustmentThis adjusts the printing position for the sponge position used during
borderless printing.†
Paper Used„
Size: 17
„
Type: Enhanced Matte Roll Paper
†
Adjustment Procedure
1. Turn the printer on.
2. Start the adjustment program and select [Platen Position Adjustment].
3. Click the [Print] button to print the adjustment pattern.
4. Refer to Figure 5-47 and check the positions of the...](http://img.usermanuals.tech/thumb/23/62441/w300_d_1490956832-epson-4880-c-service-manual_d-404.png "Page 405
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4055.3.13 Platen Position AdjustmentThis adjusts the printing position for the sponge position used during
borderless printing.†
Paper Used„
Size: 17
„
Type: Enhanced Matte Roll Paper
†
Adjustment Procedure
1. Turn the printer on.
2. Start the adjustment program and select [Platen Position Adjustment].
3. Click the [Print] button to print the adjustment pattern.
4. Refer to Figure 5-47 and check the positions of the...")
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4055.3.13 Platen Position AdjustmentThis adjusts the printing position for the sponge position used during borderless printing.† Paper Used„ Size: 17 „ Type: Enhanced Matte Roll Paper † Adjustment Procedure 1. Turn the printer on. 2. Start the adjustment program and select [Platen Position Adjustment]. 3. Click the [Print] button to print the adjustment pattern. 4. Refer to Figure 5-47 and check the positions of the...
Page 406
![Page 406
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 406†
Check Procedure
1. Click the [Check] button to print the check pattern.
2. Refer to Figure 5-49 and check the positions of the printed adjustment
line and the platen tab. If there is no slip, click the [Finish] button.
If the position has slipped, click the [Back] button to perform
adjustment again.
Figure 5-48. Platen Position Adjustment Screen (2)
Figure 5-49. Check Pattern
OK NG](http://img.usermanuals.tech/thumb/23/62441/w300_d_1490956832-epson-4880-c-service-manual_d-405.png "Page 406
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 406†
Check Procedure
1. Click the [Check] button to print the check pattern.
2. Refer to Figure 5-49 and check the positions of the printed adjustment
line and the platen tab. If there is no slip, click the [Finish] button.
If the position has slipped, click the [Back] button to perform
adjustment again.
Figure 5-48. Platen Position Adjustment Screen (2)
Figure 5-49. Check Pattern
OK NG")
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 406† Check Procedure 1. Click the [Check] button to print the check pattern. 2. Refer to Figure 5-49 and check the positions of the printed adjustment line and the platen tab. If there is no slip, click the [Finish] button. If the position has slipped, click the [Back] button to perform adjustment again. Figure 5-48. Platen Position Adjustment Screen (2) Figure 5-49. Check Pattern OK NG
Page 407
![Page 407
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4075.3.14 1000mm Feed Adjustment†
Paper Used„
Size: 17
„
Type: Enhanced Matte Roll Paper
†
Procedure
1. Turn the printer on.
2. Start the adjustment program and select [1000mm Feed Adjustment].
3. Click the [Print] button and the adjustment pattern will be printed.
4. Use a ruler (1000mm) and scale stopper to measure the distance
shown by Figure 5-51.
5. Input the measured value into [1000mm Feed] and click the [Write]...](http://img.usermanuals.tech/thumb/23/62441/w300_d_1490956832-epson-4880-c-service-manual_d-406.png "Page 407
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4075.3.14 1000mm Feed Adjustment†
Paper Used„
Size: 17
„
Type: Enhanced Matte Roll Paper
†
Procedure
1. Turn the printer on.
2. Start the adjustment program and select [1000mm Feed Adjustment].
3. Click the [Print] button and the adjustment pattern will be printed.
4. Use a ruler (1000mm) and scale stopper to measure the distance
shown by Figure 5-51.
5. Input the measured value into [1000mm Feed] and click the [Write]...")
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4075.3.14 1000mm Feed Adjustment† Paper Used„ Size: 17 „ Type: Enhanced Matte Roll Paper † Procedure 1. Turn the printer on. 2. Start the adjustment program and select [1000mm Feed Adjustment]. 3. Click the [Print] button and the adjustment pattern will be printed. 4. Use a ruler (1000mm) and scale stopper to measure the distance shown by Figure 5-51. 5. Input the measured value into [1000mm Feed] and click the [Write]...
Page 408
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4085.3.15 Initial Ink charge flag ON/OFF† Procedure 1. Enter Maintenance Mode 2. Power off → Press Paper Source (
Page 409
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4095.3.16 NVRAM Back Up and WriteReads and saves each parameter stored in NVRAM on the Main Board before replacement and writes them to the new Main Board or when replacement of the Printer Mechanism (SP), write the parameter stored in the CD-ROM which is included in Printer Mechanism (SP). (Refer to Procedure for Writing only).† Read & Save Procedure 1. Enter Tiny Mode. Power off → Press Paper Source (
Page 410
![Page 410
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4105.3.17 Check Platen GapThis checks whether or not Lever, Lock, PG (used for fixing the PG position)
is fixing Bushing, Shaft, Rear in a suitable position.†
Procedure
1. Turn the printer power on.
After printer initialization is complete, check that Lever, Lock, PG is in
the second notch from the right of Bushing, Shaft, Rear.
2. Start the adjustment program and select [Check Platen Gap].
3. Select [PG0.7] and click the...](http://img.usermanuals.tech/thumb/23/62441/w300_d_1490956832-epson-4880-c-service-manual_d-409.png "Page 410
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4105.3.17 Check Platen GapThis checks whether or not Lever, Lock, PG (used for fixing the PG position)
is fixing Bushing, Shaft, Rear in a suitable position.†
Procedure
1. Turn the printer power on.
After printer initialization is complete, check that Lever, Lock, PG is in
the second notch from the right of Bushing, Shaft, Rear.
2. Start the adjustment program and select [Check Platen Gap].
3. Select [PG0.7] and click the...")
EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CAdjustment Basic Adjustment 4105.3.17 Check Platen GapThis checks whether or not Lever, Lock, PG (used for fixing the PG position) is fixing Bushing, Shaft, Rear in a suitable position.† Procedure 1. Turn the printer power on. After printer initialization is complete, check that Lever, Lock, PG is in the second notch from the right of Bushing, Shaft, Rear. 2. Start the adjustment program and select [Check Platen Gap]. 3. Select [PG0.7] and click the...