Home > Electrolux > Washing Machine > Electrolux Ews 106410 W User Manual

Electrolux Ews 106410 W User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Electrolux Ews 106410 W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 208 Electrolux manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							2. Select the draining or spinning pro-
    gramme.
    3. Reduce the spin speed if needed, by
    pressing the relevant button.
    4. Press button 8.
    At the end of the programme, the door is
    released and can be opened. Turn the pro-
    gramme selector dial to O to switch the
    machine off.Remove the laundry from the drum and
    carefully check that the drum is empty. If
    you do not intend to carry out another
    wash, close the water tap. Leave the door
    open to prevent the formation of mildew
    and unpleasant smells.
    Stand by : once the programme has finish-
    ed after a few minutes the energy saving
    system will be enabled. The brightness ofthe display is reduced. By pressing any but-
    ton the appliance will come out of the ener-
    gy saving status.
    HELPFUL HINTS AND TIPS
    Sorting out the laundry
    Follow the wash code symbols on each
    garment label and the manufacturer’s
    washing instructions. Sort the laundry as
    follows: whites, coloureds, synthetics, deli-
    cates, woollens.
    Before loading the laundry
    Never wash whites and coloureds together.
    Whites may lose their «whiteness» in the
    wash.
    New coloured items may run in the first
    wash; they should therefore be washed
    separately the first time.
    Button up pillowcases, close zip fasteners,
    hooks and poppers. Tie any belts or long
    tapes.
    Remove persistent stains before washing.
    Rub particularly soiled areas with a special
    detergent or detergent paste.
    Treat curtains with special care. Remove
    hooks or tie them up in a bag or net.
    Removing stains
    Stubborn stains may not be removed by
    just water and detergent. It is therefore ad-
    visable to treat them prior to washing.
    Blood: treat fresh stains with cold water.
    For dried stains, soak overnight in water
    with a special detergent then rub in the
    soap and water.
    Oil based paint: moisten with benzine
    stain remover, lay the garment on a soft
    cloth and dab the stain; treat several times.
    Dried grease stains: moisten with turpen-
    tine, lay the garment on a soft surface anddab the stain with the fingertips and a cot-
    ton cloth.
    Rust: oxalic acid dissolved in hot water or a
    rust removing product used cold. Be careful
    with rust stains which are not recent since
    the cellulose structure will already have
    been damaged and the fabric tends to hole.
    Mould stains: treat with bleach, rinse well
    (whites and fast coloureds only).
    Grass: soap lightly and treat with bleach
    (whites and fast coloureds only).
    Ball point pen and glue: moisten with
    acetone
    1), lay the garment on a soft cloth
    and dab the stain.
    Lipstick: moisten with acetone as above,
    then treat stains with methylated spirits.
    Treat any residual marks with bleach.
    Red wine: soak in water and detergent,
    rinse and treat with acetic or citric acid,
    then rinse. Treat any residual marks with
    bleach.
    Ink: depending on the type of ink, moisten
    the fabric first with acetone
    1), then with
    acetic acid; treat any residual marks on
    white fabrics with bleach and then rinse
    thoroughly.
    Tar stains: first treat with stain remover,
    methylated spirits or benzine, then rub with
    detergent paste.
    Detergents and additives
    Good washing results also depend on the
    choice of detergent and use of the correct
    quantities to avoid waste and protect the
    environment.
    1) do not use acetone on artificial silk
    electrolux 11
     
    						
    							Although biodegradable, detergents contain
    substances which, in large quantities, can
    upset the delicate balance of nature.
    The choice of detergent will depend on the
    type of fabric (delicates, woollens, cottons,
    etc.), the colour, washing temperature and
    degree of soiling.
    All commonly available washing machine
    detergents may be used in this appliance:
    • powder detergents for all types of fabric
    • powder detergents for delicate fabrics
    (60°C max) and woollens
    • liquid detergents, preferably for low tem-
    perature wash programmes (60°C max)
    for all types of fabric, or special for wool-
    lens only.
    The detergent and any additives must be
    placed in the appropriate compartments of
    the dispenser drawer before starting the
    wash programme.
    If using liquid detergents, a programme
    without prewash must be selected.
    Your appliance incorporates a recirculation
    system which allows an optimal use of the
    concentrated detergent.
    Follow the product manufacturer’s recom-
    mendations on quantities to use and donot exceed the «MAX» mark in the de-
    tergent dispenser drawer.
    Quantity of detergent to be used
    The type and quantity of detergent will de-
    pend on the type of fabric, load size, de-
    gree of soiling and hardness of the water
    used.
    Follow the product manufacturers’ instruc-
    tions on quantities to use.
    Use less detergent if:
    • you are washing a small load
    • the laundry is lightly soiled
    • large amounts of foam form during wash-
    ing.
    Degrees of water hardness
    Water hardness is classified in so-called
    “degrees” of hardness. Information on hard-
    ness of the water in your area can be ob-
    tained from the relevant water supply com-
    pany, or from your local authority. If the wa-
    ter hardness degree is medium or high we
    suggest you to add a water softener follow-
    ing always the manufacturer’s instructions.
    When the degree of hardness is soft, read-
    just the quantity of the detergent.
    WASHING PROGRAMMES
    Programme
    Maximum and Minimum Temperature
    Cycle Description
    Maximum Spin Speed
    Maximum Fabrics Load
    Type of Laundry
    OptionsDetergent
    Compartment
    COTTONS and LINENS
    90° - Cold
    Main wash - Rinses
    Maximum spin speed: 1000 rpm
    Max. load 6 kg - Reduced load 3 kg
    1)
    White and coloured cotton (normally soiled items).
    SPIN REDUCTION
    RINSE HOLD
    PREWASH
    2)
    EXTRA RINSE
    TIME MANAGER
    SYNTHETICS
    60° - Cold
    Main wash - Rinses
    Maximum spin speed: 900 rpm
    Max. load 3 kg - Reduced load 1,5 kg
    1)
    Synthetic or mixed fabrics: underwear, coloured
    garments, non-shrink shirts, blouses.
    SPIN REDUCTION
    RINSE HOLD
    PREWASH
    2)
    EXTRA RINSE
    TIME MANAGER
    12 electrolux
     
    						
    							Programme
    Maximum and Minimum Temperature
    Cycle Description
    Maximum Spin Speed
    Maximum Fabrics Load
    Type of Laundry
    OptionsDetergent
    Compartment
    DELICATES
    40° - Cold
    Main wash - Rinses
    Maximum spin speed: 700 rpm
    Max. load 3 kg - Reduced load 1,5 kg
    1)
    Delicate fabrics: acrylics, viscose, polyester.
    SPIN REDUCTION
    RINSE HOLD
    PREWASH
    2)
    EXTRA RINSE
    TIME MANAGER
    WOOL/HANDWASH 40° - Cold
    Main wash - Rinses
    Maximum spin speed: 1000 rpm
    Max. load 1 kg
    Washing programme for machine washable wool as
    well as for hand washable woollens and delicate fab-
    rics with «hand washing» care symbol. Note: A single
    or bulky item may cause imbalance. If the appliance
    doesn’t perform the final spin phase, add more items,
    redistribute the load manually and then select the
    spinning programme.
    SPIN REDUCTION
    RINSE HOLD
    SILK
    30° - Cold
    Main wash - Rinses
    Maximum spin speed: 700 rpm
    Max. load 1 kg
    Delicate washing programme suitable for silk and
    mixed synthetic items.SPIN REDUCTION
    RINSE HOLD
    LINGERIE
    40° - Cold
    Main wash - Rinses
    Maximum spin speed: 1000 rpm
    Max. load 2 kg
    This programme is suitable for very delicate items
    such a lingerie, bras and underwear. The maximum
    spin speed is automatically reduced.SPIN REDUCTION
    RINSE HOLD
    electrolux 13
     
    						
    							Programme
    Maximum and Minimum Temperature
    Cycle Description
    Maximum Spin Speed
    Maximum Fabrics Load
    Type of Laundry
    OptionsDetergent
    Compartment
    SOAK
    30°
    Prewash - Soak for about 40 minutes - Stop with wa-
    ter in the tub
    Max. load 6 kg
    Special programme for heavily soiled laundry. The ma-
    chine performs a soak at 30°C. At the end of this time
    the machine will stop automatically with water left in
    the tub.
    Before starting a new washing phase, it is necessary
    to empty out the water by:
    •Draining only: turn the programme selector dial to
    Drain programme. (Press the button 8).
    •Draining and spinning: turn the programme se-
    lector dial to programme Spin, reduce the spin
    speed by means of button 3, and then press button
    8.
    Important! This programme cannot be used for very
    delicate fabrics as silk or wool. Pour the detergent for
    the soak programme into the compartment marked .
    At the end of the soak (after having emptied out the
    water) you can select the washing programme. (First
    turn the programme selector dial to 
     , then to the
    programme and press the button 8).
     
    RINSE
    Rinse - Long spin
    Maximum spin speed: 1000 rpm
    Max. load 6 kg
    With this programme it is possible to rinse and spin
    cotton garments which have been washed by hand.
    To intensify the rinsing action, select the option EX-
    TRA RINSE. The appliance will add some additional
    rinses.SPIN REDUCTION
    RINSE HOLD
    EXTRA RINSE
    DRAIN
    Draining of water
    Max. load 6 kg
    For emptying out the water of the last rinse in pro-
    grammes with the option selected, which ends with
    water left in the tub.  
    SPIN
    Drain and long spin
    Maximum spin speed: 1000 rpm
    Max. load 6 kg
    Separate spin for hand washed garments and after
    programmes with the Rinse Hold and No Spin option
    selected. You can choose the spin speed by pressing
    the relevant button to adapt it to the fabrics to be
    spun.SPIN REDUCTION 
    14 electrolux
     
    						
    							Programme
    Maximum and Minimum Temperature
    Cycle Description
    Maximum Spin Speed
    Maximum Fabrics Load
    Type of Laundry
    OptionsDetergent
    Compartment
    COTTONS ECONOMY
    90° - 40°
    Main wash - Rinses
    Maximum spin speed: 1000 rpm
    Max. load 6 kg
    White and fast coloured cotton
    This programme can be selected for slightly or nor-
    mally soiled cotton items. The temperature will de-
    crease and the washing time will be extended. This al-
    lows to obtain a good washing efficiency so saving
    energy.SPIN REDUCTION
    RINSE HOLD
    PREWASH
    2)
    EXTRA RINSE
    EASY IRON
    60° - Cold
    Main wash - Rinses
    Maximum spin speed: 900 rpm
    Max. load 1 kg
    This programme can be selected for synthetic items
    and mixed fabrics to be ironed. The laundry can be
    gently washed and spun to avoid any creasing. In this
    way ironing is easier. Furthermore the machine will
    perform additional rinses.SPIN REDUCTION
    RINSE HOLD
    PREWASH
    2)
    EXTRA RINSE
    JEANS
    60° - Cold
    Main wash - Rinses
    Maximum spin speed: 1000 rpm
    Max. load 3 kg
    With this programme it is possible to wash items like
    pants, shirts or jackets in Jeans and also jersey realiz-
    ed with hi-tech materials. (The EXTRA RINSE option
    will be activated automatically).SPIN REDUCTION
    RINSE HOLD
    PREWASH
    2)
    BLANKET
    40° -30°
    Main wash - Rinses
    Maximum spin speed: 700 rpm
    Max. load 2 kg
    Special programme for a single washable synthetic
    blanket or duvet.SPIN REDUCTION
     / OFF
    For cancelling the programme which is running or to
    switch the machine off .  
    1) If you select the Quick or Super Quick option by pressing button 10, we recommend that you reduce the
    maximum load as indicated. Full loading is possible however with somewhat reduced cleaning results. If you
    select the Refresh or Super Refresh option, we recommend that you reduce the load even more.
    2) If using liquid detergents, a programme without PREWASH must be selected.
    CARE AND CLEANING
    Warning! You must disconnect the
    appliance from the electricity supply,before you can carry out any cleaning
    or maintenance work.
    electrolux 15
     
    						
    							Descaling
    The water we use normally contains lime. It
    is a good idea to periodically use a water
    softening powder in the machine. Do this
    separately from any laundry washing, and
    according to the softening powder manu-
    facturers instructions. This will help to pre-
    vent the formation of lime deposits.
    After each wash
    Leave the door open for a while. This helps
    to prevent mould and stagnant smells form-
    ing inside the appliance. Keeping the door
    open after a wash will also help to preserve
    the door seal.
    Maintenance wash
    With the use of low temperature washes it
    is possible to get a build up of residues in-
    side the drum.
    We recommend that a maintenance wash
    be performed on a regular basis.
    To run a maintenance wash:
    • The drum should be empty of laundry.
    • Select the hottest cotton wash pro-
    gramme.
    • Use a normal measure of detergent,
    must be a powder with biological proper-
    ties.
    External cleaning
    Clean the exterior cabinet of the appliance
    with soap and water only, and then dry
    thoroughly.
    Important! Do not use methylated spirits,
    solvents or similar products to clean the
    cabinet.
    Cleaning the dispenser drawer
    The detergent dispenser drawer should be
    cleaned regularly.
    The washing powder and additive dispens-
    er drawer should be cleaned regularly.
    Remove the drawer by pressing the catch
    downwards and by pulling it out.
    Flush it out under a tap, to remove any
    traces of accumulated powder.
    To aid cleaning, the top part of the additive
    compartment should be removed. Clean all
    parts with water.
    Clean the chamber of dispenser drawer
    with a brush.
    16 electrolux
     
    						
    							Washing drum
    Rust deposits in the drum may occur due
    to rusting foreign bodies in the washing or
    tap water containing iron.
    Important! Do not clean the drum with
    acidic descaling agents, scouring agents
    containing chlorine or iron or steel wool.
    1. Remove any rust deposits on the drum
    with a cleaning agent for stainless steel.
    2. Run a washing cycle without any wash-
    ing to clean off any cleaning agent resi-
    dues.
    Programme: Short Cotton Programme
    at maximum temperature and add ap-
    prox. 1/4 measuring cup of detergent.
    Door seal
    Check from time to time the door seal and
    eliminate eventual possible objects that
    could be trapped in the fold.
    Drain pump
    The pump should be inspected regularly
    and particularly if:
    • the appliance does not empty and/or
    spin;
    • the appliance makes an unusual noise
    during draining due to objects such as
    safety pins, coins etc. blocking the
    pump;
    • a problem with water draining is detected
    (see chapter “What to do if...” for more
    details).
    Warning! Before opening the pump
    door, switch the appliance off and
    remove the mains plug from the
    socket.
    Proceed as follows:
    1. Unplug the appliance.
    2. If necessary wait until the water has
    cooled down.
    3. Open the pump door levering on the
    groove with a coin (or with the suitable
    tool, that you can find in the bag con-
    taining the instruction booklet, depend-
    ing on the model).
    1
    2
    electrolux 17
     
    						
    							4. Place a bowl with a small edge close to
    the pump to collect any spillage.
    5. Pull out the emergency emptying cap
    from the filter cover, using pliers.
    6. When no more water comes out, un-
    screw the pump cover by turning it an-
    ti-clockwise, using pliers, and remove
    the filter. Always keep a rag nearby to
    dry up any water spillages when re-
    moving the cover.
    Clean the filter under a tap, to remove
    any traces of fluff.
    12
    7. Remove foreign bodies and fluff from
    the pump seat and from the pump im-
    peller.
    8. Check carefully whether the pump im-
    peller rotates (it rotates jerkily). If it
    doesn’t rotate, please contact your
    Service Centre.
    18 electrolux
     
    						
    							9. Replace the filter into the pump by in-
    serting it correctly into the special
    guides. Screw the pump cover firmly by
    turning it clockwise.
    10. Replace the emergency emptying cap
    into the filter cover and fix it firmly.
    11. Close the pump door.
    Warning! When the appliance is in use
    and depending on the programme
    selected there can be hot water in the
    pump. Never remove the pump cover
    during a wash cycle, always wait until
    the appliance has finished the cycle,
    and is empty. When refitting the pump
    cover , ensure it is securely re-
    tightened so as to stop leaks and
    young children being able to remove it.
    Cleaning the water inlet filters
    If you notice that the machine is taking lon-
    ger to fill, check that the filter in the water
    inlet hose is not blocked.
    1. Turn off the water tap.
    2. Unscrew the water inlet hose.
    3. Clean the filter in the hose using a hard
    bristle brush.
    4. Screw the hose back onto the tap.
    electrolux 19
     
    						
    							5. Unscrew the hose from the machine.
    Keep a rug nearby because some water
    may flow.
    6. Clean the filter in the valve with a stiff
    brush or with the piece of cloth.
    7. Screw the hose back to the machine
    and make sure the connection is tight.
    8. Turn on the water tap.
    Emergency emptying out
    If the water is not discharged, proceed as
    follows to empty out the machine:
    1. pull out the plug from the power socket;
    2. close the water tap;
    3. if necessary, wait until the water has
    cooled down;
    4. open the pump door;
    5. place a bowl on the floor. Remove the
    emergency emptying cap from the filter.
    The water should drain by gravity into
    the bowl. When the bowl is full, refit the
    cap into the filter. Empty the bowl. Re-
    peat the procedure until water stops
    flowing out;6. clean the pump if necessary as previ-
    ously described;
    7. screw the pump again and close the
    door.
    Frost precautions
    If the machine is installed in a place where
    the temperature could drop below 0°C,
    proceed as follows:
    1. Pull out the plug from the power socket.
    2. Turn off the water tap.
    3. Unscrew the inlet hose.
    4. Place the end of the inlet hose in a bowl
    placed on the floor, open the emergen-
    cy emptying cup of the filter and let wa-
    ter drain out.
    5. Refit the emergency emptying cap into
    the filter and screw the water inlet hose
    back.
    6. When you intend to start the machine
    up again, make sure that the room tem-
    perature is above 0°C.
    Important! Every time you drain the water
    for emergency you must pour 2 litres of
    water into the main wash compartment of
    the detergent drawer and then run the drain
    programme. This will activate the ECO
    Valve device avoiding that part of the
    detergent remains unused at next washing.
    WHAT TO DO IF...
    Certain problems are due to lack of simple
    maintenance or oversights, which can be
    solved easily without calling out an engi-
    neer. Before contacting your local Service
    Centre, please carry out the checks listed
    below.
    During machine operation it is possible that
    the red pilot light of button 8 blinks, one of
    the following alarm codes appears on the
    display and some acoustic signals soundevery 20 seconds to indicate that the ma-
    chine is not working:
    •
     : problem with the water supply.
    •
     : problem with the water draining.
    •
     : door open.
    Once the problem has been eliminated,
    press the button 8 to restart the pro-
    gramme. If after all checks, the problem
    persists, contact your local Service Centre.
    20 electrolux
     
    						
    All Electrolux manuals Comments (0)

    Related Manuals for Electrolux Ews 106410 W User Manual