Electrolux Esl 46510 User Manual

SETTING AND STARTING A WASHING PROGRAMME
Starting the washing programme
without delay start
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. Set the washing programme.
• The number related to the washing
programme flashes in the display.
3. If necessary, set the energy saver func-
tion.
4. Close the appliance door, the washing
programme starts automatically.
Starting the washing programme with
delay start
1. Activate the appliance.
2. Make sure that the appliance is in set-...

WASHING PROGRAMMES
ProgrammeType of soilType of loadProgramme de-
scriptionEnergy
saver
function
1
 1)
AllCrockery, cutlery,
pots and pansPrewash
Wash 45 °C or 70 °C
Rinses
DryYes, with
effect
2Heavy soilCrockery, cutlery,
pots and pansPrewash
Wash 70 °C
Rinses
DryYes, with
effect
3
 2)
Fresh soilCrockery and cut-
leryWash 60 °C
RinseYes, with-
out effect
4
 3)
Normal soilCrockery and cut-
leryPrewash
Wash 50 °C
Rinses
DryYes, with
effect
5Normal or light soilDelicate crockery
and glasswareWash 45 °C...

CARE AND CLEANING
To remove and clean the filters
Dirty filters decrease the washing results.
Although the maintenance is very low with
these filters, make a check at intervals and
if necessary, clean them.
1. Turn the filter (A) counterclockwise and
remove it out from filter (B).
A
B
2. Filter (A) has two parts. To disassemble
the filter, pull them apart.
3. Fully clean the parts with water.
4. Put the two parts of the filter (A) togeth-
er and push. Make sure that they en-
gage correctly in each...

MalfunctionPossible causePossible solution
The appliance does not fill with
water.The water tap is blocked or
there is limescale on it.Clean the water tap.
 The water pressure is too low.Contact your local water au-
thority.
 The water tap is closed.Open the water tap.
 The filter in the water inlet hose
is blocked.Clean the filter.
 The connection of the water in-
let hose is not correct.Make sure that the connection
is correct.
 The water inlet hose is dam-
aged.Make sure that the water inlet
hose has...

ProblemPossible causePossible solution
 The spray arms could not turn
freely. Incorrect position of the
items in the baskets.Make sure that an incorrect po-
sition of the items do not cause
the blockage of the spray arms.
 The filters are dirty or not as-
sembled and installed correctly.Make sure that the filters are
clean and correctly assembled
and installed.
 The quantity of detergent was
not sufficient or missing.Make sure that the quantity of
detergent is sufficient.
Limescale particles on the...

Water supply 1)Cold water or hot watermaximum 60 °C
CapacityPlace settings9
1) Connect the water inlet hose to a water tap with a 3/4 thread.
The rating plate on the inner edge of
the appliance door shows the electrical
connection data.
If the hot water comes from alternative
sources of energy, (e.g. solar panels,photovoltaic panels and aeolian), use a
hot water supply to decrease energy
consumption.
ENVIRONMENT CONCERNS
The symbol  on the product or on its
packaging indicates that this product may
not...

electrolux 17
 

18 electrolux
 

electrolux 19
 

117932350-A-102011
 www.electrolux.com/shop