Electrolux Esl 46510 User Manual

user manual
Dishwasher
ESL 46510
 

Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information   2
Product description   5
Control panel   5
Use of the appliance   7
Setting the water softener   7
Use of dishwasher salt   8
Use of detergent and rinse aid   9
Multitab function   10Loading cutlery and dishes   10
Setting and starting a washing programme
 11
Washing programmes   12
Care and cleaning   13
What to do if…   13
Technical data   15
Environment concerns   16
Subject to change without...

or make a hole in the bottom of the appli-
ance.
• Do not fill the rinse aid dispenser with
other products than the rinse aid, (dish-
washer cleaning agent, liquid detergent).
This can cause damage to the appliance.
• Make sure that the spray arms can move
freely before you start a washing pro-
gramme.
• The appliance can release hot steam if
you open the door while a washing pro-
gramme operates. There is a risk of skin
burns.
•Do not remove the dishes from the appli-
ance until the washing programme...

Electrical connection
• The appliance must be earthed.
• Make sure that the electrical information
on the rating plate agrees with the power
supply.
• Always use a correctly installed shock-
proof socket.
• Do not use multiple plugs and extension
cables. There is a risk of fire.
• Do not replace or change the mains ca-
ble. Contact the service centre.
• Make sure not to squash or cause dam-
age to the mains plug and cable behind
the appliance.
• Make sure that there is access to the
mains plug after the...

PRODUCT DESCRIPTION
1
2
3
4
567 89
1Upper basket
2Water hardness dial
3Salt container
4Detergent dispenser
5Rinse aid dispenser
6Rating plate
7Filters
8Lower spray arm
9Upper spray arm
Visual signal
• When the washing programme starts, a
red visual signal shows on the floor belowthe appliance door. This red signal stays
on until the washing programme is com-
pleted.
• When the washing programme is com-
pleted , a green visual signal shows on
the floor below the appliance door.
• When the appliance has a...

1On/off button
2Display
3Delay button
4Programme button (down)
5Programme button (up)
6Energy saver button
7Multitab button
8Reset button
9Indicators
Indicators
1)
Salt indicator. It comes on when it is necessary to fill the salt container.
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
1)
Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispens-
er.
End indicator. It comes on...

Activate the appliance. The appliance
is in setting mode when:
• The display shows two horizontal status
bars.
Activate the appliance. The appliance
is not in setting mode when:
• The display shows the time of the wash-
ing programme or of the delay start.
– It is necessary to cancel the pro-
gramme or the delay start to go back
to the setting mode. Refer to Setting
and starting a washing programme.
Acoustic signals
You can hear the acoustic signals in these
conditions:
• The washing programme is...

Water hardnessWater hardness ad-
justment
German degrees
(°dH)French degrees
(TH°)mmol/lClarke de-
greesmanuallyelec-
troni-
cally
43 - 5076 - 907,6 - 9,053 - 632 1)9
37 - 4265 - 756,5 - 7,546 - 5221)8
29 - 3651 - 645,1 - 6,436 - 4521)7
23 - 2840 - 504,0 - 5,028 - 3521)6
19 - 2233 - 393,3 - 3,923 - 2721)51)
15 - 1826 - 322,6 - 3,218 - 2214
11 - 1419 - 251,9 - 2,513 - 1713
4 - 107 - 180,7 - 1,85 - 1212
< 4< 7< 0,7< 512)12)
1) Factory position.
2) Do not use salt at this level.
You must adjust the water...

USE OF DETERGENT AND RINSE AID
20
30MAX1234+-
1
23
4
5 6
7
Use of detergent
To help the environment, do not use
more than the correct quantity of deter-
gent.
Obey the instructions on the detergent
packaging.
How to fill the detergent dispenser:
1.
Press the release button 
2 to open the
lid 
7 of the detergent dispenser.
2.
Put the detergent in the dispenser 
1 .
3. If the washing programme has a pre-
wash phase, put a small quantity of de-
tergent on the inner part of the appli-
ance door.4. If you use...

You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).Turn the rinse aid selector 4 to increase or
decrease the dosage.
MULTITAB FUNCTION
The multitab function is for combi detergent
tablets.
These tablets contain agents as detergent,
rinse aid and dishwasher salt. Some types
of tablets can contain other agents.
Be sure that these tablets are applicable for
the water hardness in your area (refer to the
instructions on the packaging of the prod-
ucts).
The...