Electrohome Vistapro 2000 Users Manual

GLOSSARY
A-4VistaPro 2000 Users Manual
The smallest discernible element of data from a computer-generated image.
The phase of the pixel sampling clock relative to incoming data.
The frequency of the pixel sampling clock, indicated by the number of pixels per
line.
The projector is at presentation level when an image from a source is displayed
without the presence of a slidebar, menu, pull-down list, or error message. For
example, if a help page is displayed, the projector is not at presentation level....

GLOSSARY
VistaPro 2000 Users ManualA-5
A video output format of some video tape and disk players (used primarily in
France). SECAM (Sequential Couleur á Mémoire) signals are similar in
resolution and frequency to PAL signals. The primary difference between the
two standards is in the way color information is encoded.
A slidebar is a graphical display of an adjustable setting. The numerical setting
usually represents a percentage.
The device, such as a computer or VCR, connected to the projector for...

GLOSSARY
A-6VistaPro 2000 Users Manual
The difference between the vertical height of the projector lens and the vertical
height of the display.
The signal that is used by display devices (such as projectors) to generate an
image. This term also refers to the output of video tape/disk players and
computers.
A device that converts NTSC 3.58, NTSC 4.4, PAL, PAL-N, PAL-M or SECAM
to RGB video.
A specific type of video signal, such as NTSC, PAL, SECAM. VistaPro 2000
can automatically recognize and display the...

Appendix B
Keypad Reference
VistaPro 2000 Users Manual B-1
Figure B-1. Infrared (IR) Remote or Wired Remote Keypad 

KEYPAD REFERENCE
B-2VistaPro 2000 Users Manual
Figure B-2. Built-in Keypad 

Appendix C
Menu Tree
VistaPro 2000 Users Manual C-1 

Appendix D
Serial Communication Cables
VistaPro 2000 Users Manual D-1
When connecting the VistaPro 2000 to either a computer, another VistaPro 2000 projector or a Marquee Signal
Switcher, use a standard RS-232 serial communication cable. Cable details are provided below: 

SERIAL COMMUNICATION CABLES
D-2VistaPro 2000 Users Manual 

Appendix E
Optional Input Modules
VistaPro 2000 Users Manual E-1
There are many optional input modules and accessories available for the VistaPro 2000. Contact your dealer or
Electrohome for a complete and up-to-date listing.
The Marquee Signal Switcher is a rack-mountable signal selector which can
extend the number of selectable inputs by the VistaPro 2000. Connected to the
projector RGB interface (DAT 1), each switcher adds 8 more sources to the
system. Other switchers can be connected to the first,...

OPTIONAL INPUT MODULES
E-2VistaPro 2000 Users Manual
Features
à accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync,
or separate horizontal and vertical sync)
à BNC connectors for RGB signal inputs
à RCA connectors for left and right channel audio inputs
The RGB400 Buffered Amplifier Input Module may be installed in a VistaPro
2000 projector, a Marquee signal switcher or Marquee Case/Power Supply.
Connect three-, four-, or five-wire RGB video signals of up to 400 MHz
bandwidth, signals...