Eizo Flexscan T2351w Users Manual

21Chapter2Adjusting Screens
 ●To adjust black level 
You can adjust the black level of images.
Adjustable range
-50 to 50
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
The  menu appears.
3. Use  or  for adjustment.
4.
 
P

ress 
 to exit the adjustment.
Note
• After completing black level adjustment, readjust the contrast as appropriate.
 ●To adjust contrast 
The brightness of the screen is adjusted by varying the video signal level....

22Chapter2Adjusting Screens
 ●To adjust color temperature 
Color temperature can be adjusted.
The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value. 
The value is expressed in degrees “K” (Kelvin).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the flame 
temperature. A gain preset value is set for each color temperature setting value.
Adjustable range
Off, 4000K-10000K (specified by every 500K...

23Chapter2Adjusting Screens
 ●To adjust the color saturation 
This function allows you to adjust color saturation.
Adjustable range
-128 to 127
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
The  menu appears.
3. Use  or  for adjustment.
4.
 
P

ress 
 to exit the adjustment.
Attention
• Using this function may make some color gradations unavailable for display.
Note
• The minimum value (-128) changes the screen to monochrome.
 ●To adjust...

24Chapter2Adjusting Screens
 ●To adjust gain 
The brightness of each color component red, green, and blue is called “Gain”. You can change the hue of 
“white” by adjusting gain.
Adjustable range
0 to 100%
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
The  menu appears.
3. Adjust gain with  or  for each of red, green, and blue.
4.
 
P

ress 
 to exit the adjustment.
Attention
• Using this function may make some color gradations unavailable...

25Chapter2Adjusting Screens
 ●To set overdrive intensity 
This function allows you to set overdrive intensity based on the use of the monitor. You can reduce Image 
lags by setting it to “Enhanced” when displaying animated images.
Adjustable range
Enhanced, Standard, Off
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
The  menu appears.
3. Use  or  for adjustment.
4.
 
P

ress 
 to exit the adjustment.
Attention
• The overdrive function is...

26Chapter2Adjusting Screens
2-5. Changing the Screen Size
 ●To change screen size 
If a resolution other than recommended is used, the image displayed in full screen automatically. You can 
change the screen size by using  from  menu.
Setting Function
AutoThe  monitor  automatically  changes  the  screen  size  according  to  the  aspect  ratio  and 
r

esolution  information  from  the  external  device.  This  can  be  set  only  for  HDMI  (SD 
S

ignal)  input.
Full
...

27Chapter3SettingMonitor
Chapter 3 Setting Monitor
3-1. Adjusting Volume 
This function allows you to adjust the volume.
Adjustable range
0 to 30
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
The volume adjustment menu appears.
3. Use  or  for adjustment.
4.
 
P

ress 
 to exit the adjustment.
Note
• Alternatively, you can use  or  for adjustment (see “1-2. Controls and Functions” (page 8) ).
•
 
T

he volume for the HDMI and stereo mini...

28Chapter3SettingMonitor
3-3. Setting Adjustment Menu Display
 ●Changing Adjustment Menu Display Size 
Change the Adjustment menu size using the following procedure.
Procedure
1. 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
C

hoose  from the  menu, and press 
.
The  menu appears.
4. Select “Enable” or “Disable” with  or .
5.
 
P

ress 
 to exit the adjustment.
 ●Changing Adjustment Menu Display Position 
You can change the display position of the...

29Chapter3SettingMonitor
 ●Changing Transparency of Adjustment Menu Display 
You can set the transparency of the Adjustment menu.
Procedure
1. 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
C

hoose  from the  menu, and press 
.
The  menu appears.
4. Use  or  for adjustment.
5.
 
P

ress 
 to exit the adjustment.
3- 4. Locking Buttons
This function allows you to lock  to prevent changing the current adjustments/settings.
Procedure
1.
 
P

ress 
 to...

30Chapter3SettingMonitor
3-7. Enabling/Disabling DDC/CI communication
This function allows you to enable/disable the DDC/CI communication (see “7-4. Glossary” (page 46)).
Procedure
1.
 
P
 ress 
 to turn off the monitor.
2.
 
P

ress 
 holding  down to turn on the monitor.
You can toggle between Enable and Disable by performing steps 1 and 2.
Note
• You can check the DDC/CI setting in the  menu.
•  
H
 DMI input does not support DDC/CI communication.
3-8. Resetting the Monitor to the Default Settings...