Eizo Flexscan T2351w Users Manual

11Chapter1Introduction
1- 4. Basic Operations and Functions
 ●Basic Adjustment menu operations
1. Displaying Adjustment Menu
1. Press . The adjustment menu appears.
2. Adjusting/Setting
1. Choose a menu to adjust/set with , , , , and then press . The Sub menu appears.
2. Choose an item to adjust/set with , , , , and then press . The adjustment/ setting menu 
appears.
3. Adjust/set the selected item with , , , , and then press .
3. Exiting
1. Choose  from the Sub menu and press . The Main menu appears....

12Chapter1Introduction
 ●Functions
The following table shows all the Adjustment menu’s adjustment and setting menus.
Main menuSetting Reference
AutoAdjustment*1Screen “ 2-3.  Displaying  Screen  Correctly” 
(p

age  15)
Range
S
creen
Clock*1
Phase*1
Position*1
Smoothing
Return
C
olor
*2Brightness “ 2- 4.  Adjusting  Color”  (page  19)
BlackLevel
Contrast
Temperature
Gamma
Saturation
Hue
Gain
PowerResolution
Overdrive
Reset
S
ound
Volume “ 3-1.  Adjusting  Volume  ” ...

13Chapter2Adjusting Screens
Chapter 2 Adjusting Screens
2-1. Compatible Resolutions/Formats
The monitor supports the following resolutions and signal format.
Analog Input (D-Sub)
Resolution Applicable Signals Vertical Scan 
Frequency Dot Clock
640×480
V GA,  VESA,  CEA-861 up  to  75  Hz
148.5  MHz
(Max.)
720
 ×  400 VGA
 TEXT70
 Hz
800
 ×  600 VESAup
 to  75  Hz
1024
 ×  768 VESAup
 to  75  Hz
1280
 ×  720 CEA-861 60
 Hz
1280
 ×  960 VESA 60
 Hz
1280
 ×  1024 VESAup
 to...

14Chapter2Adjusting Screens
2-2. Setting the Resolution
When you connect the monitor to the PC and find that the resolution is improper, or when you want to change 
the resolution, follow the procedure below.
Windows 7
1. Right-click the mouse anywhere on the desktop except for icons.
2.
 
F
 rom the displayed menu, click “Screen resolution”.
3.
 
O
 n the “Screen Resolution” dialog box, select the monitor.
4.
 
C
 lick “Resolution” to select the desired resolution.
5.
 
C
 lick the [OK] button.
6....

15Chapter2Adjusting Screens
2-3. Displaying Screen Correctly
 ●Digital Signal Input
When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if 
characters and/or lines appear blurred, go to “6. Modify blurred characters or lines.” (page 18) .
When performing more advanced adjustment, see “2-4. Adjusting Color” (page 19) and subsequent pages.
 ●Analog Signal Input
Attention
• The monitor will take about 30 minutes before its internal electric...

16Chapter2Adjusting Screens
2. Prepare to use analog screen adjustment patterns.
Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern files”.
Note
• For details and instructions on opening the “Screen adjustment pattern files”, refer to the Readme.txt file.
3. Perform the auto adjustment again with the analog screen adjustment pattern 
displayed.
 ●To adjust flickering, screen position, and screen size automatically  
Procedure
1.
 
D
 isplay Pattern 1 in full...

17Chapter2Adjusting Screens
 ●To remove flickering or blurring 
Procedure
1.
 
C
 hoose  from the  menu, and press 
.
The  menu appears.
2. Adjust the phase with  or  to minimize flickering or blurring.
3.
 
P

ress 
 to exit the adjustment.
When vertical bars appear on the screen after adjustment, go back to “To eliminate vertical bars ”.
(Clock → Phase → Position)
Attention
• Flickering or blurring may not be eliminated depending on your PC or graphics board.
 ●To correct the screen position 
Note
•...

18Chapter2Adjusting Screens
5. Adjusting color gradation.
 ●To adjust color gradation automatically 
Every color gradation (0 to 255) can be displayed by adjusting the signal output level.
Procedure
1.
 
D
 isplay Pattern 2 in full screen on the monitor using the “Screen adjustment pattern files”.
2. Choose  from the Adjustment menu, and press .
3.
 
C

hoose  from the  menu, and press 
.
The  menu appears.
4. Select  with  or , and press .
The output range is set automatically.
5. Close Pattern 2.
6....

19Chapter2Adjusting Screens
2- 4. Adjusting Color
 ●To select the display mode (FineContrast mode)
This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode Purpose
User1Select  one  of  these  user  modes  to  define  a  desired  set  of  parameter  settings.
User2
sRGB Suitable
 for  color  matching  with  sRGB  compatible  peripherals.
Paper Produces
 a  printed  paper  effect  by  decreasing  contrast  and  color ...

20Chapter2Adjusting Screens
 ●Adjustable settings in each mode
The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable function.)
For instructions on how to adjust or set each function, refer to subsequent pages.
√: Adjustable -: Not adjustable
Icon Function FineContrast modeUser1
User2 sRGB Paper Game Cinema
Brightness
√√√√√
BlackLevel
√--√ √
Contrast
√--√ √
Temperature
√-√ √√
Gamma
√--√ -
Saturation
√--√ √
Hue
√--√ √
Gain
√----
PowerResolution
√--√ √...