Home > Eizo > Monitor > Eizo Flexscan Sx2262w Users Manual

Eizo Flexscan Sx2262w Users Manual

Here you can view all the pages of manual Eizo Flexscan Sx2262w Users Manual. The Eizo manuals for Monitor are available online for free. You can easily download all the documents as PDF.

Page 41

41Chapter 6  Reference
Dimensions Main unit566 mm (22.3 inch) × 456-538 mm (18.0 – 21.2 inch) × 230 mm  
(9.1 inch)
Main unit (without stand) 566 mm (22.3 inch) × 367 mm (14.4 inch) × 85 mm (3.4 inch)
Mass Main unit  Approx. 10.7 kg (23.6 lbs.)
Main unit (without stand)  Approx.7.1 kg (15.7 lbs.)
Movable range Tilt 40° Up, 0° Down
Swivel 35° Right, 35° Left
Adjustable height 82 mm (3.23 inch)
Rotation 90° (clockwise)
Environmental 
Conditions Temperature 
Operating temperature: 0 °C - 35 °C (32 °F - 95...

Page 42

42Chapter 6  Reference
Outside Dimensions
SX2262W
PIVOT
SWIVEL
355 (13.00)
36.2 (1.43)
172°
172°
53.8 (2.12)85 (3.35)
333 (13.01)
298.1 (11.07)
17.45 (0.69)
511 (20.01)17.6 (0.69)
521.5 (20.05)
17.45 (0.69)
φ220 (7.9)
90°
475.8 (18.07)
188.5 (7.04)
235.5 (9.03)
256 (10.01)
9.5 (0.37)
411.1 (16.02)
30°
324.1 (12.08)
181 (7.01)
240.5 (9.05)
347.5 (13.07)
235 (9.03)
100 (3.09)
100 (3.09)
205.5 (8.01) 205.5 (8.01)116.5 (4.06)
116.5 (4.06)
610.5 (24.00)
99.5 (3.92)
564.2 (22.02)
249 (9.08)
285 (11.02)
481.5...

Page 43

43Chapter 6  Reference
Connector Pin Assignment
• DVI-I connector
123
4
56
78
910 11 12
1314 15
16
19 20 21
17 18 22 23 24C1C2C3C4
C5
Pin 
No. Signal Pin 
No. Signal Pin 
No. Signal 
1 T.M.D.S. Data 2- 11 T.M.D.S. Data1/3 Shield  21 NC*
2 T.M.D.S. Data 2+  12 NC* 22 T.M.D.S. Clock shield
3 T.M.D.S. Data2/4 Shield  13 NC* 23 T.M.D.S. Clock+
4 NC* 14 +5V Power  24 T.M.D.S. Clock-
5 NC* 15 Ground (return for +5V, 
Hsync, and Vsync) C1 Analog Red
6 DDC Clock (SCL) 16 Hot Plug Detect C2 Analog Green
7 DDC...

Page 44

44Chapter 6  Reference
Accessories List
Cleaning Kit EIZO “ScreenCleaner”
Signal Cable PP200
Speaker Unit i•Sound L3
For the latest information about the accessories, refer to our web site. http://www.eizo.com
  

Page 45

45Chapter 6  Reference
6-6. Glossary
Clock
The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the 
graphics system in use, when the analog input signal is converted to a digital signal for image display. 
This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the 
screen.
DDC/CI (Display Data Channel/Command Interface)
VESA provides the standardization for the interactive communication of the setting information,...

Page 46

46Chapter 6  Reference
HDCP (High-bandwidth Digital Contents Protection)
Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc. 
This helps to transmit the digital contents safely by coding the digital contents sent via DVI terminal on 
the output side and decoding them on the input side. Any digital contents cannot be reproduced if both of 
the equipments on the output and input sides are not applicable to HDCP system.
Phase
Phase means the sampling...

Page 47

47Chapter 6  Reference
6-7. Preset Timing
The following table shows factory preset video timing (for analog signal only).
Attention
• Display position may be deviated depending on the PC connected, which may require screen adjustment using Adjustment menu.
•
 
I
 f a signal other than those listed in the table is input, adjust the screen using the Adjustment menu. However, 
screen display may still be incorrect even after the adjustment.
•
 
W
 hen interlace signals are used, the screen cannot be...

Page 48

48 
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This 
means that your display is designed, manufactured and tested according to 
some of the strictest quality and environmental requirements in the world. 
This makes for a high performance product, designed with the user in focus 
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
● Good visual er gonomics and image quality in order to...

Page 49

49 
For U.S.A. , Canada, etc. (rated 100-120 Vac) OnlyFCC Declaration of Conformity
We, the Responsible Party EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone:  (562) 431-5011
declare that the product Trade name:  EIZO
Model:  FlexScan SX2262W / SX2462W
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any 
interference received,...

Page 50

50 
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige
Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der
Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen:Der Standfuß muß den nachfolgenden Anforderungen entsprechen:
a)
 
Der 
 Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes...
Start reading Eizo Flexscan Sx2262w Users Manual

Related Manuals for Eizo Flexscan Sx2262w Users Manual

All Eizo manuals