Eizo Flexscan Sx2262w Users Manual

11Chapter 1  Introduction
Functions
The following table shows all the Adjustment menu’s adjustment and setting menus.
Main Menu	Item	Adjusting/Setting
ColorBrightness“2-3. Color Adjustment” (page 18
)
Contrast
Temperature
Gamma
Advanced 
SettingsHue
Saturation
Contrast Enhancer
Outline Enhancer
Gain
6 Colors
Color Reset “3-9. Restoring the Default Setting”  
(page 28
)
Screen
Screen Size “2- 4. Displaying Lower Resolutions”  
(page 24
)
Analog 
AdjustmentAuto Adjustment “2-2. Displaying Screen Correctly”...

12Chapter 2  Adjusting Screen
Chapter 2 Adjusting Screen
2-1. Setting Screen Resolution
Compatible Resolutions/Frequencies
The monitor supports the following resolutions.
Analog Input
Resolution Applicable signal Frequency Dot Clock
640 × 480 VGA60 Hz
170 MHz(Max.)
720 × 400
VGA TEXT 70 Hz
800 × 600 VESA60 Hz
1024 × 768 VESA60 Hz
1280 × 960 VESA60 Hz
1280 × 1024  VESA60 Hz
1600 × 1200  VESA60 Hz
1680 × 1050 VESA CVT60 Hz
1920 × 1200
*VESA CVT RB 60 Hz
Digital Input (DVI-I/DisplayPort)
Resolution...

13Chapter 2  Adjusting Screen
Setting Resolution
When you connect the monitor to the PC and find that the resolution is improper, or when you want to 
change the resolution, follow the procedure below.
● Windows 7
1. Right-click the mouse anywhere on the desktop except for icons.
2. 
F
 rom the displayed menu, click “Screen resolution”.
3.
 
O
 n the "Screen Resolution" dialog, select the monitor .
4.
 
C
 lick "Resolution" to select the desired resolution.
5.
 
C
 lick the [OK] button....

14Chapter 2  Adjusting Screen
2-2. Displaying Screen Correctly
Digital Input
When digital signals are input, images are displayed correctly based on the preset data of the monitor. 
When performing advanced adjustment, see “2-3. Color Adjustment” (page 18) and subsequent pages.
Analog Input
Attention
• Wait 30 minutes or more from monitor power on before starting adjustments. 
(Allow the monitor to warm up for at least 30 minutes before making adjustments.)
The monitor screen adjustment is used to...

15Chapter 2  Adjusting Screen
2 Prepare the display pattern for the analog display adjustment.
Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern files”.
NOTE
• For details and instructions on opening the “Screen adjustment pattern files”, refer to the “Readme.txt” file.
3	Perform the auto adjustment again with the analog screen adjustment pattern 
displayed.
● To adjust flickering, screen position, and screen size automatically [Auto Adjustment]
Procedure
1. 
D...

16Chapter 2  Adjusting Screen
4 Perform advanced adjustments for the following using the  menu of the .
Adjust the clock, phase and position, in this order.
● To eliminate vertical bars [Clock]
Procedure
1.
 
C
 hoose  from the  menu, and press 
.
2.
 
A

djust the clock with 
 or .
Press  slowly so as not to miss the adjustment point.
3. Press  to exit the adjustment.
When blurring, flickering or bars appear on the screen after adjustment, proceed to [Phase] to remove flickering 
or blurring.
● Remove...

17Chapter 2  Adjusting Screen
5 Adjust the color gradation.
● To adjust color gradation automatically [Range Adjustment]
Every color gradation (0 to 255) can be displayed by adjusting the signal output level.
Procedure
1. 
D
 isplay Pattern 2 in full screen on the monitor using the “Screen adjustment pattern files”.
2. Choose  from the  menu, and press .
The color gradation is adjusted automatically.
When the auto adjustment is completed, a message appears. Select “OK” to confirm the new settings or...

18Chapter 2  Adjusting Screen
2-3. Color Adjustment
● To select the display mode (FineContrast)
FineContrast allows you to select easily the adequate mode suitable for the monitor’s application.
FineContrast mode
Mode Purpose
1-User1 Available for the color settings according to your preference.
2-User2
3-User3
4-Text Suitable for displaying texts for word processing or spreadsheets.
5 -Picture Suitable for displaying images such as photos or picture images.
6-Movie Suitable for playing back animated...

19Chapter 2  Adjusting Screen
NOTE
• The values shown in “%” or “K” are available only as reference.
• 
U
 sing the “ScreenManager Pro for LCD” allows you to perform the color adjustment by using the mouse and 
keyboard of your PC. The adjusted status can be registered as a color data and restore the data later. (Refer to 
“Chapter 4 Color Adjustment” on the User’s Manual for “ScreenManager Pro for LCD”.)
● Adjustment items in each mode
According to the mode selected, the adjustable function differs....

20Chapter 2  Adjusting Screen
● To adjust the brightness [Brightness]
The screen brightness is adjusted by changing the brightness of the backlight (Light source from the LCD 
back panel).
Adjustable range: 0 to 100%
Procedure
1. 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
A

djust the brightness with 
 or .
4.
 
P

ress 
 to exit the adjustment.
NOTE
• You can also adjust the brightness using  and .
•
 
W

hen your feel the image is bright even if...