Eizo Flexscan S2433w Users Manual

							21Chapter 2  Settings and Adjustments
2-6 Turning off the audio output at Power 
Saving mode [Power Save]
This monitor allows you to turn off the audio output from the speakers/headphone at the power saving mode.
(1)
 Choose  from the Adjustment menu, and press .
(2)
 Choose  from the  menu, and press .
The  setting menu appears.
(3) Select “On” or “Of f” with  or , and press .
The setting is completed.
2-7 Setting On/Off for the automatic 
brightness adjustment function 
 
[Auto EcoView]
The sensor on the front side of the monitor detects the environmental brightness 
to adjust the screen brightness automatically and comfortably by using the  Auto 
EcoView function.
(1)
 Press .
The  setting menu appears.
(2) The On/Off setting is toggled by pressing .
2-8 Setting On/Off for Power Savin g mode 
[Power Save]
This function allows you to set the monitor into the power saving mode 
according to the PC status.
(1)
 Choose  from the Adjustment menu, and press .
(2)
 Choose  from the  menu, and press .
The  setting menu appears.
(3) Select “On” or “Of f” with  or , and press .
The setting is completed.
■ Analog input
This monitor complies with the  VESA DPMS standard.
[Power Saving System]
PC MonitorPower 
Indicator
Operating OperatingBlue
Power saving STAND-BY
	SUSPENDED 
OFF Power saving Orange
■ Digital input 
•
 DVI-D
This monitor complies with the DVI DMPM standard.
•
 DisplayPort This monitor complies with the DisplayPort Standard V1.1a.
NOTE
• No audio is output while the monitor 
is in the Power Saving mode, if 
input signal and sound source are of 
DisplayPort.
NOTE
• Be careful not to block the sensor on 
the lower side of the monitor when 
using the 
Auto EcoView function.
Attention
• Turning off the main power switch 
or unplugging the power cord 
completely shuts of f power supply to 
the monitor.
•
 Devices connected to the USB port 
(upstream and downstream) work 
when the monitor is in power saving 
mode or when the power button of 
the monitor is Of

f. Therefore, power 
consumption of the monitor varies 
with connected devices even in the 
power saving mode.
•
 Power consumption varies even 
when the stereo mini jack cable is 
connected.
   
						

							22Chapter 2  Settings and Adjustments
[Power Saving System]
The monitor enters the power saving mode in five seconds in connection with 
the PC setting.
PCMonitorPower Indicator
Operating OperatingBlue
Power saving Power savingOrange
2-9 Turning off the monitor automatically 
[Off T
imer]
This function allows you to switch the setting to turn off the monitor 
automatically after a specified time has passed at the power saving mode.
 Adjustable range: Disable, E

nable (0, 1, 2, 3, 5, 10, 15, 20, 25, 30, 45 min, 
1-5h)
(1)
 Choose  from the Adjustment menu, and press .
(2)
 Choose  from the  menu, and press 
.
The  setting menu appears.
(3) Select “Enable” or “Disable” with  or .
 When selecting “Enable”, se

t a monitor Off time with 
 or .
(4) Press 
.
The setting is completed.
2-10 Displaying the level of power s aving by 
EcoView Index
This function allows you to display the power saving level by green indicator .
The power saving ratio comes to high as the indicator level meter lights towards 
right.
(1)
 Press .
The EcoView Index menu appears.
NOTE
• EcoView Index appears when 
adjusting brightness or switching the 
FineContrast mode, etc.  
Y
ou can switch the on/off setting 
of displaying EcoView Index in 
 menu from the 
 menu. (Only when 
the orientation of the adjustment 
menu is set to "Landscape")
   
						

							23Chapter 2  Settings and Adjustments
2-11 Screen Size Selection
●	To change screen size [Screen Size]
The image with the resolution other than the recommended resolution is 
displayed in full screen automatically. You can change the screen size by using 
 from  menu.
Menu Function
Full
	Screen	(default setting) Displays an image in full screen. Images are distorted in 
some	cases	because	the	vertical	rate	is	not	equal	to	the	horizontal rate.
Enlarged Displays
	an	image	in	full	screen.	In	some	cases,	a	blank	ho

rizontal
	or	ve
 rtical
	bo
 rder
	ap
 pears
	to	eq
 ualize
	th
 e
	ve
 rtical
	rate and the horizontal rate.
Normal Displays
	images	with	the	specified	resolution.
Example: Image size 1280 x 1024
Full	Screen
(Default setting) Enlarged
Normal
(1920 
× 1200) (1500 × 1200) (1280 × 1024)
(1) Choose  from the Adjustment menu, and press .
(2)
 Choose  from the  menu, and press .
The screen size setting window appears.
(3) Select “Full Screen,” “Enlar ged,” or “Normal” with  or , and 
press 
.
The screen size setting is completed.
●	 To adjust brightness of non-display area [Border Intensity]
A border (black area with no image) around the image appears in the “Normal” 
or “Enlarged” mode.
Border
(1) Choose  from the Adjustment menu, and press .
(2)
 Choose  from the  menu, and press .
The  menu appears.
(3) Adjust border intensity with  or , and press .
The border intensity adjustment is completed.
         
						

							24Chapter 2  Settings and Adjustments
2-12 Setting Adjustment Menu Display
●	
To update menu settings [Menu Size/Menu Position/Menu 
Off Timer/Translucent]
Menu Size
Change the Adjustment menu size using the following procedure.
(1)
 Choose  from the Adjustment menu, and press .
(2)
 Choose  from the  menu, and press .
(3)
 Choose  from the  menu, and  press .
The  menu appears.
(4) Select “Normal” or “Enlarged” with  or , and press .
The setting is completed.
Menu Position
Adjust the menu position using the following procedure.
(1)
 Choose  from the Adjustment menu, and  press .
(2)
 Choose 

 from the   menu, and press 
.
(3)
 Choose 

 from the   menu, and press 
.
The  menu appears.
(4) Select a menu position with  
/  /  / , and press .
The setting is completed.
Menu Off Timer
Set the menu display time using the following procedure.
 Adjustment range: Disable, E

nable (15, 30, 45, 60s)
(1)
 Choose  from the 

Adjustment menu, and press 
.
(2)
 Choose 

 from the   menu, and press 
.
(3)
 Choose  from the   menu, and press 
.
The  menu appears.
(4) Select “Enable” or “Disable” with  or .
 When selecting “

Enable ”, choose a time for displaying menu with 
 or 
.
(5)
 Press .
The setting is completed.
Translucent
Set the transparency for menu display using the following procedure.
(1)
 Choose  from the Adjustment menu, and press .
(2)
 Choose 

 from the   menu, and press 
.
(3)
 Choose <

Translucent > from the  menu, and press 
.
The  menu appears.
(4) Adjust the transparency for m enu display with  or , and press .
The setting is completed.
NOTE
• The display time of the FineContr ast 
mode and EcoView Index remains 
unchanged.
   
						

							25Chapter 2  Settings and Adjustments
2-13 Setting Orientation
●	To set the orientation of the Adjustment menu [Orientation]
This function allows you to change the orientation of the Adjustment menu
when using the monitor screen in vertical display position.
(1)
 Choose  from the Adjustment menu, and p ress .
(2)
 Choose  from the Others menu, and press .
The  menu appears.
(3) Select “Landscape” or “Port rait” with  or , and press .
The setting is completed.
(4) When selecting “Portrait”, turn the monitor screen 90° in clockwise 
direction.
2-14 Locking Buttons
This function allows you to lock   to prevent changing the adjusted/set status.
(1)
 Press  to turn off the monitor.
(2)
 Press  holding  down to turn on the monitor.
The Lock/Unlock setting is toggled by performing the operation in step 2.
2-15 Displaying Monitor Information   
[Information]
This function allows you to display the input signal status, current resolution 
and model name. Information 1/3 : 
 Input signal status (D-Sub/DVI Digital/DisplayPort), 
resolution and H/V frequency
Information 2/3 : 
 Enable/Disable setting for DDC/CI
Information 3/3 : 
 Model name, serial number and usage time
(1)
 Choose  from the 

Adjustment menu, and press 
.
The  menu appears.
(2) Then, press  to check settings, etc.
NOTE
• For using the monitor with 
“Portrait” position, the graphics 
board supporting portrait display is 
required. 
When using the monitor 
with “Portrait” position, the setting 
needs to be changed depending on the 
graphics board used in your PC. Refer 
to the manual of the graphics board 
for details.
NOTE
• The usage time is not always “0” 
when you purchase the monitor due 
to factory inspection.
   
						

							26Chapter 2  Settings and Adjustments
2-16 Enabling/Disabling DDC/CI 
communication
This function allows you to enable/disable the DDC/CI communication.(1)
 Press  to turn off the monitor.
(2)
 Press  holding  down to turn on the monitor.
The Enable/Disable setting is toggled by performing the operation in step 2.
2-17 Setting Power Indicator ON/OF F  
[Power Indicator]
This function allows you to set the power indicator (blue) ON/OFF in the 
monitor ON condition.
(1)
 Choose <

Others> from the Adjustment menu, and press 
.
(2)
 Choose 

 from the   menu, and press 
.
The  menu appears.
(3) Select “Enable” or “Disable”  with  or , and press .
The setting is completed.
2-18 Setting Language [Language]
This function allows you to select a language for the adjustment menu or 
displaying message.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Simplified Chinese/
Traditional Chinese/Japanese
(1)
 Choose  menu from the 

Adjustment menu, and press 
.
The  menu appears.
(2) Choose a language with  
/  /  / , and press .
The setting is completed.
2-19 Setting EIZO logo display ON/O FF
The EIZO logo appears on the display when turning on the monitor . This 
function allows you to display, or not, the EIZO logo.
(1)
 Press  to turn off the monitor.
(2)
 Press  holding  down to turn on the monitor.
The EIZO logo display setting is toggled by performing the operation in step 2.
NOTE
• You can check the DDC/CI setting in 
the  menu.
   
						

							27Chapter 2  Settings and Adjustments
2-20 Resuming the Default Setting [Reset]
There are two types of Reset. One is to reset the color adjustment only to the default settings, and the other is to reset all the settings to the default settings.
●	 To reset color adjustment values
Only the adjustment values in the current FineContrast mode will revert to the 
default settings (factory settings).
(1)
 Choose  from the Adjustment menu, and press  .
(2)
 Choose  from the  menu and press 
.
The  menu appears.
(3) Select  with  or , and press .
The color adjustment values revert to the default settings.
●	 To reset all adjustments to the factory default settings
Reset all adjustments to the factory default settings.
(1)
 Choose  from the 

Adjustment menu, and press 
.
(2)
 Choose  from the  menu, and 

press 
.
The  menu appears.
(3) Select  with  or , and press .
All setting values revert to the default settings.
Attention
• After resetting, you cannot undo the 
operation.
NOTE
• For main default settings, refer 
to “Main default settings (factory 
settings)” on 
page 37.
   
						

							28Chapter	3		Connecting	Cables
3-1 Connecting More than Two PCs to the 
Monitor
More than two PCs can be connected to the monitor through the D-Sub mini 15 
pin, the DVI-D and the DisplayPort connector on the back of the monitor .
Connection examples
D-Sub	mini
15-pin	Connector
DVI-D
	connector
Signal
	cable	(supplied	FD-C39)
Signal
	cable	(supplied	MD-C87)
T

o PC 1
To PC 2
To PC 3
Signal
	cable	(PP200 option)
D-Sub	mini
15-pin	Connector
DVI-D	connector
DisplayPort
 connectorDisplayPort 
connectorAnalog
Digital
Digital
●	To switch the input signal
The input signal switches each time  is pressed.
When the signal is switched, the active input port name appears at the top right 
corner of the screen.
Chapter 3 Connecting Cables
   
						

							29Chapter	3		Connecting	Cables
●	To set input signal selection [Input Signal]
The monitor recognizes the connector through which PC signals are input.
When a PC is turned off or enters the powersaving mode, the monitor 
automatically displays another signal.
Priority setting Function
Auto When a PC is turned off or enters the powersaving 
mode, the monitor automatically displays another 
signal.
Manual The monitor detects only the PC’s signals currently 
displaying automatically. Select an active input signal 
with 
.
[Input signal setting]
(1)
 Choose  from the Adjustment menu, and press .
(2)
 Choose  from the  menu, and press .
The  menu appears.
(3) Select “Auto” or “Manual” w ith  or , and press .
The setting is completed.
3-2 Adjusting the DVI Input Level   
[DVI Input Level]
This function allows you to adjust the DVI signal input level when using a DVI 
long cable.
 Adjustment range: 

Auto, Manual (1 to 8)
(1)
 Press  to turn off the monitor.
(2)
 Press  holding  down to turn on the monitor.
The  adjustment menu appears.
(3) Select “Auto” or “Manual” w ith  or .
When selecting “Manual”, adjust the input level with  or  to display correctly.
(4) Press .
The adjustment is completed.
Attention
• Select "Manual" only if a noise 
appears on the screen when using a 
DVI long cable.
NOTE
• When “Auto” is selected for , the monitor
’s power-saving 
function works only when the two 
PCs are in the power-saving mode.
   
						

							30Chapter	3		Connecting	Cables
3-3 Connecting Peripheral USB Devices
This monitor has a hub compatible with USB. Connected to a PC compatible with USB or another USB hub, this monitor functions as a USB hub allowing 
connection to peripheral USB devices.
● Required System Environment
(1) A PC equipped with a USB port or another USB hub connected to 
a USB compatible PC
(2) Windows 2000/XP/Vista or Mac OS 9.2.2 and Mac OS X 10.2 or later
(3) EIZO USB cable (MD-C93)
● Connection Procedure (Setup of USB Function)
(1) Connect the monitor first to a PC using the signal cable, and run 
the PC.
(2) Connect the supplied USB cable between the downstream USB  port of a USB compatible PC (or another USB hub) and the 
monitor’s upstream USB port.
(3) Connect the peripheral USB device to the USB port (downstream)  of the monitor.
 The USB hub function is set up automatically upon connection of 
the USB cable.
Attention
• This monitor may not work depending 
on PC, OS or peripheral devices 
to be used. For USB compatibility 
of peripheral devices, contact their 
manufactures.
•
 Devices connected to the USB port 
(upstream and downstream) work 
when the monitor is in power saving 
mode or when the power button of 
the monitor is Of

f. Therefore, power 
consumption of the monitor varies 
with connected devices even in the 
power saving mode.
•
 When the main 

power switch is Off, 
device connected to the USB port will 
not operate.
Upstream Downstream