Eizo Flexscan S2232w Users Manual

1Chapter 4  Troubleshooting

Chapter		 Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
•  No-picture problems → See No.1 - No.2.
•  Imaging problems (digital input) → See No.3 - No.8.
•  Imaging problems (analog input) → See No.3 - No.12.
•  Other problems → See No.13 - No.16.
•  USB problems → See No.17.
Problems Possible	cause	and	remedy
1.	 No	picture • Power indicator does not light. • 
Check whether the power cord is connected...

Chapter 4  Troubleshooting

ProblemsPossible	cause	and	remedy
.	 Afterimages	appear. • Use a screen saver or off timer function for a long-time 
image display.
•  Afterimages are particular to LCD monitors. Avoid 
displaying the same image for a long time.
6.	 Green/red/blue/white	dots	or	defective	dots	remain	 on	the	screen. • 
This is due to LCD panel characteristics and is not a 
failure.
7.	 Interference	patterns	or	pressure	marks	remain	on	 the	screen. • 
Leave the monitor with a...

Chapter 4  Troubleshooting

ProblemsPossible	cause	and	remedy
17.	 The	monitor	connected	with	the	USB	cable	is	not	 detected.	/	USB	devices	connected	to	the	monitor	
does	not	work. • 
Check whether the USB cable is connected correctly. 
(see page 30)
•  Change the USB port to another one. If the PC or 
peripheral devices works correctly by changing the USB 
port, contact your local dealer. (Refer to the manual of 
the PC for details.)
•  Reboot the PC.
•  If the peripheral devices work...

Chapter 5  Reference

Chapter		 Reference
-1	 Attaching	an	Arm
The stand can be removed and replaced with an arm (or another stand) to be 
attached to the monitor. Use an arm or stand of EIZO option.
1	 Lay	the	LCD	monitor	on	a	soft	cloth	spread	over	on	a 	stable	
surface	with	the	panel	surface	facing	down.
2	 Remove	the	stand.	(Prepare	a	screwdriver.)
Unscrew the four screws securing the unit and the stand with the 
screwdriver.
3	 Attach	the	monitor	to	the	arm	or	stand.
Secure the...

Chapter 5  Reference

-	 Folding	the	EZ-UP	stand
Perform the following procedures to fold the stand when re-packing a monitor 
with an EZ-UP stand.
1	 Remove	the	cable	holder.
2	 Lower	the	monitor	screen	position	until	the	hinge	of	 the	stand	
touches	the	stand	base,	and	attach	the	lock	metal	fitting.
Adjust the monitor angle so as the monitor screen not to touch the stand 
base.
HingeStand Base
Lock metal fitting
3	 Fall	the	monitor	screen	backward	with	keeping	slide-up	the...

6Chapter 5  Reference

5-3	 Specifications
SW
LCD Panel22.0-inch (560 mm) TFT color LCD with anti-glare
Viewing angle:  Horizontal 178°, Vertical 178° (CR:10 or more)
Dot Pitch0.282 mm
Horizontal Scan FrequencyAnalog: 31-82 kHzDigital: 31-65 kHz
Vertical Scan FrequencyAnalog: 55-76 Hz (Non-interlace)(1680 × 1050: 55-61 Hz)Digital: 59-61 Hz (Non-interlace)(VGA TEXT: 69-71 Hz)
Resolution1680 dots × 1050 lines
Max. Dot ClockAnalog: 150 MHzDigital: 120 MHz
Max. Display ColorApprox....

7Chapter 5  Reference

MassMain unit (including Height adjustable stand)Approx. 9.6 kg (21.2 lbs.)
Main unit (including  Tilt stand)Approx. 7.6 kg (16.8 lbs.)
Main unit (including EZ-UP stand)Approx. 11.4 kg (25.1 Ibs.)
Main unit (without stand)Approx. 6.6 kg (14.6 lbs.)
Movable rangeHeight adjustable standTilt: 40° Up, 0° DownSwivel: 35° Right, 35° LeftAdjustable height: 82 mm (3.2 inch)Rotation: 90° (clockwise)
Tilt standTilt: 30° Up, -5° Down
EZ-UP standTilt: 25° Up, 0° DownSwivel: 172° Right,...

8Chapter 5  Reference

Analog Input Signal (Sync)Separate, TTL, positive/ negative
Composite, TTL, positive/ negative
Analog Input Signal (Video)Analog, Positive (0.7Vp-p/75Ω)
Digital Signal Transmission SystemTMDS (Single Link)
Video Signal MemoryAnalog signal: 45 (preset: 16)Digital signal: 10
Audio OutputSpeaker output: 0.5W + 0.5W (8Ω, THD: 3% or less)Headphone output: 2mW + 2mW
Line inputInput impedance : 48 kΩ (typ.)Input level :1.0 Vrms (Max.)
Plug & PlayVESA DDC 2B / EDID structure 1.3...

9Chapter 5  Reference

Vertical Scan FrequencyAnalog: 55-76 Hz (Non-interlace)(1920 × 1200: 55-61 Hz)Digital: 59-61 Hz (Non-interlace)(VGA TEXT: 69-71 Hz)
Resolution1920 dots × 1200 lines
Max. Dot ClockAnalog: 202.5 MHzDigital: 162 MHz
Max. Display ColorApprox. 16.77 million colors: Applicable to 8 bit (1064.33 million colors/10bit LUT)
Display Area (H × V)518.4 mm × 324.0 mm
Power Supply100-120 VAC ±10%, 50/60Hz 0.95A200-240 VAC ±10%, 50/60Hz 0.45A
Power ConsumptionScreen Display On95W or less...

0Chapter 5  Reference

Environmental ConditionsTemperatureOperating temperature: 5 °C - 35 °C (41 °F - 95 °F)Storage temperature: -20 °C - 60 °C (-4 °F - 140 °F)
HumidityOperating humidity: 30% - 80% R.H. (no condensation)Storage humidity: 30% - 80% R.H. (no condensation)
PressureOperating: 700 to 1,060 hPaStorage: 200 to 1,060 hPa
USBStandardUSB Specification Revision 2.0
PortUpstream port × 1, Downstream port × 2
Supply currentDownstream: Max. 500mA/1 port
Main	default	settings	(factory...