Eizo Flexscan S2232w Users Manual

1Chapter 2  Settings and Adjustments

-6	 Setting	On/Off	for	the	automatic	brightness	adjustment	function	
	
[Auto	EcoView]
The sensor on the front side of the monitor detects the environmental brightness 
to adjust the screen brightness automatically and comfortably by using the  Auto 
EcoView function.
(1) Press 
.
The  setting menu appears.
(2) The On/Off setting is toggled by pressing .
-7	 Setting	On/Off	for	Power	Saving	mode	
[Power	Save]
This function allows you to set the monitor...

Chapter 2  Settings and Adjustments

-8	 Turning	off	the	monitor	automatically	[Off	Timer]
This function allows you to switch the setting to turn off the monitor 
automatically after a specified time has passed at the power saving mode.
 Adjustable range: Disable, Enable (0, 1, 2, 3, 5, 10, 15, 20, 25, 30, 45 min, 
1-5h)
(1)  Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
The  setting menu appears.
(3) Select “Enable” or “Disable” with 	or	....

Chapter 2  Settings and Adjustments

-10	 Screen	Size	Selection
●	To	change	screen	size	[Screen	Size]
The image with the resolution other than the recommended resolution is 
displayed in full screen automatically. You can change the screen size by using 
 from  menu.
MenuFunction
Full Screen (default setting)
Displays an image in full screen. Images are distorted in some cases because the vertical rate is not equal to the horizontal rate.
EnlargedDisplays an image in full screen. In some...

Chapter 2  Settings and Adjustments

-11	 Setting	Adjustment	Menu	Display
●	To	update	menu	settings	[Menu	Size/Menu	Position/Menu	
Off	Timer/Translucent]
Menu	Size
Change the Adjustment menu size using the following procedure.
(1) Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the 
 menu, and press .
(3)  Choose  from the  menu, and  press	
.
The  menu appears.
(4) Select “Normal” or “Enlarged” with 	or	, and  press	.
The setting is completed.
Menu	Position
Adjust the...

Chapter 2  Settings and Adjustments

-1	 Setting	Orientation
●	To	set	the	orientation	of	the	Adjustment	menu	[Orientation]
This function allows you to change the orientation of the Adjustment menu
when using the monitor screen in vertical display position.
(1) Choose  from the Adjustment menu, and p ress	
.
(2)  Choose  from the Others menu, and press 
.
The  menu appears.
(3) Select “Landscape” or “Portrait” with 	or	, and press .
The setting is completed.
(4) When selecting...

6Chapter 2  Settings and Adjustments

-1	 Enabling/Disabling	DDC/CI	
communication
This function allows you to enable/disable the DDC/CI communication.(1)  Press 
 to turn off the monitor.
(2)  Press 
 holding  down to turn on the monitor.
The Enable/Disable setting is toggled by performing the operation in step 2.
-16	 Setting	Power	Indicator	ON/OFF		
[Power	Indicator]
This function allows you to set the power indicator (blue) ON/OFF in the 
monitor ON condition.
(1)  Choose 
 from...

7Chapter 2  Settings and Adjustments

-19	 Resuming	the	Default	Setting	[Reset]
There are two types of Reset. One is to reset the color adjustment only to the 
default settings, and the other is to reset all the settings to the default settings.
●	To	reset	color	adjustment	values
Only the adjustment values in the current FineContrast mode will revert to the 
default settings (factory settings).
(1) Choose  from the Adjustment menu, and press
	.
(2)  Choose  from the  menu and press .
The  menu...

8Chapter 3  Connecting Cables

-1	 Connecting	Two	PCs	to	the	Monitor
Two PCs can be connected to the monitor through the DVI-D and the D-Sub 
mini 15 pin connector on the back of the monitor.
Connection	examples
D-Sub mini15-pin ConnectorDVI-D connector
Signal cable (supplied FD-C39)Signal cable (supplied MD-C87)
To PC 1To PC 2
D-Sub mini15-pin ConnectorDVI-D connector
AnalogDigital
●	To	switch	the	input	signal
The input signal switches each time  is pressed.
When the signal is switched, the...

9Chapter 3  Connecting Cables

●	To	set	input	signal	selection	[Input	Signal]
The monitor recognizes the connector through which PC signals are input.
When either PC is turned off or enters the power-saving mode, the monitor 
automatically displays signals of another PC.
Priority	settingFunction
AutoWhen either PC is turned off or enters the power-saving mode, the monitor automatically displays signals of another PC.
ManualThe monitor detects only the PC’s signals currently displaying...

0Chapter 3  Connecting Cables

-	Connecting	Peripheral	USB	Devices
This monitor has a hub compatible with USB. Connected to a PC compatible
with USB or another USB hub, this monitor functions as a USB hub allowing
connection to peripheral USB devices.
●	Required	System	Environment
(1) A PC equipped with a USB port or another USB hub connected to 
a USB compatible PC
(2) Windows 2000/XP/Vista or Mac OS 9.2.2 and Mac OS X 10.2 or later
(3) EIZO USB cable (MD-C93)
●	Connection	Procedure...