Eizo Flexscan S2111w Users Manual

							
PRECAUTIONS
Chapter 1  Features and Overview
1-1 Features
1-2 Switches and Indicators
1-3  Functions and Basic Operation
Chapter 2  Settings and Adjustments
2-1 Utility Disk
2-2 Screen Adjustment
2-3 Color Adjustment
2-4  Off Timer/Power Saving Settings
2-5  Screen Size Selection
2-6  Power Indicator/EIZO Logo Display Setting
2-7 Beeper Settings
2-8 Locking Switches
2-9  Setting Adjustment Menu Display
2-10  Viewing Information/Setting Language
2-11  Resumption of Default Setting
Chapter 3  Connecting Cables
3-1  Connecting Two PCs to the Monitor
3-2  Connecting Peripheral USB Devices
Chapter 4  Troubleshooting
Chapter 5  Reference
5-1 Attaching an Arm
5-2 Cleaning
5-3 Specifi cations
5-4 Glossary
5-5 Preset Timing
How to Setup
Please read the Setup Manual (separate volume)
Important
Please read this User’s Manual and Setup 
Manual  (separate volume)  carefully to 
familiarize yourself with safe and effective 
usage.
S 2111W _U M _E N _v1 .3 .in dd   c o v.1S2111W_UM_EN_v1.3.indd   cov.13 /2 /2 007   6 :5 4:5 1 P M3/2/2007   6:54:51 PM 
						

							
SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them 
carefully.
WARNING
Failure to abide by the information in a WARNING 
may result in serious injury and can be life threatening.CAUTION
Failure to abide by the information in a CAUTION 
may result in moderate injury and/or property or 
product damage.
Indicates a prohibited action.
Indicates a mandatory action that must be followed.
Copyright© 2006-2007 EIZO NANAO CORPORATION All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, \
or transmitted, in any form or by any means, 
electronic, mechanical, or otherwise, without the prior written permissi\
on of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or informatio\
n confi dential 
unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information 
Although every effort has been made to ensure that this manual provides up-to-date inform\
ation, please note that EIZO 
monitor speci fi cations are subject to change without notice.
ENERGY STAR is a U.S. registered mark.
Apple and Macintosh are registered trademarks of Apple Inc.
VGA is a registered trademark of International Business Machines Corporatio\
n.
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards Association.
Windows is a registered trademark of Microsoft Corporation.
PowerManager is a trademark of EIZO NANAO CORPORATION.
FlexScan, ScreenManager and EIZO are registered trademarks of EIZO NANAO\
 CORPORATION in Japan and other countries.
As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has determined that this product 
meets the ENERGY STAR guidelines for energy ef fi ciency.
Product speci fi cation may vary with sales areas.
Con fi rm the speci fi cation in the manual written in language of the region of purchase.
S 2111W _U M _E N _v1 .3 .in dd   c o v.2S2111W_UM_EN_v1.3.indd   cov.23 /2 /2 007   6 :5 4:5 1 P M3/2/2007   6:54:51 PM 
						

							
1PRECAUTIONS
 PRECAUTIONS
IMPORTANT
•  This product has been adjusted specifi cally for use in the region to which it was originally shipped. If the p\
roduct is 
used outside the region, it may not operate as speci fi ed in the speci fi cations. 
•  To ensure personal safety and proper maintenance, please read carefully t\
his section and the caution statements on  the monitor. 
[Location of Caution Statement]
 WARNING
If the unit begins to emit smoke, smells like something is burning, or m\
akes 
strange noises, disconnect all power connections immediately and contact\
 
your dealer for advice.
Attempting to use a malfunctioning unit may result in  fi re, electric shock, or equipment 
damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in  fi re, electric shock, or burn.
Refer all servicing to quali fi ed service personnel.
Do not attempt to service this product yourself as opening or removing c\
overs may result in 
fi  re, electric shock, or equipment damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into th\
e cabinet or spillage into 
the cabinet may result in  fi re, electric shock, or equipment damage.
If an object or liquid falls/spills into the cabinet, unplug the unit im\
mediately. Have the unit 
checked by a quali fi ed service engineer before using it again.
S 2111W _U M _E N _v1 .3 .in dd   1S2111W_UM_EN_v1.3.indd   13 /2 /2 007   6 :5 4:5 2 P M3/2/2007   6:54:52 PM 
						

							
2PRECAUTIONS
 WARNING
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or e\
quipment damage.
If the unit falls, disconnect the power immediately and ask your dealer \
for advice. Do not 
continue using a damaged unit. Using a damaged unit may result in fi re or electric shock.
Set the unit in an appropriate location.
Not doing so may result in  fi re, electric shock, or equipment damage.
•  Do not place outdoors.
•  Do not place in the transportation system (ship, aircraft, trains, auto\
mobiles, etc.)
•  Do not place in a dusty or humid environment.
•  Do not place in a location where the steam comes directly on the screen.\
•  Do not place near heat generating devices or a humidi fi er.
To avoid danger of suffocation, keep the plastic packing bags away from 
babies and children.
Use the enclosed power cord and connect to the standard power outlet of \
your 
country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in  fi re or electric shock.
To disconnect the power cord, grasp the plug  fi rmly and pull.
Tugging on the cord may damage and result in  fi re or electric shock.
The equipment must be connected to a grounded main outlet.
Failure to do so may result in  fi re or electric shock.
Use the correct voltage.
•  The unit is designed for use with a speci fi c voltage only.  Connection to another voltage 
than speci fi ed in this User’s Manual may cause  fi re, electric shock, or equipment damage.
•  Do not overload your power circuit, as this may result in  fi re or electric shock.
S 2111W _U M _E N _v1 .3 .in dd   2S2111W_UM_EN_v1.3.indd   23 /2 /2 007   6 :5 4:5 5 P M3/2/2007   6:54:55 PM 
						

							
3PRECAUTIONS
 WARNING
Handle the power cord with care.
•  Do not place the cord underneath the unit or other heavy objects.
•  Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord \
may result in fi re 
or electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user’s manual of the arm 
stand and install the unit securely.
Not doing so may cause the unit to become unattached, which may result i\
n injury or 
equipment damage. When the unit is dropped, please ask your dealer for advice. Do not 
continue using a damaged unit. Using a damaged unit may result in  fi re or electric shock. 
When reattaching the tilt stand, please use the same screws and tighten \
them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enter\
s the eyes or mouth.
If any part of the skin or body comes in direct contact with the panel, \
please wash thoroughly. 
If some physical symptoms result, please consult your doctor.
Follow local regulation or laws for safe disposal.
The backlight of the LCD panel contains mercury.
S 2111W _U M _E N _v1 .3 .in dd   3S2111W_UM_EN_v1.3.indd   33 /2 /2 007   6 :5 4:5 6 P M3/2/2007   6:54:56 PM 
						

							
4PRECAUTIONS
 CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit.  Moving the u\
nit with the cord 
attached is dangerous.  It may result in injury.
When handling the unit, grip the bottom of the unit fi rmly with both hands 
ensuring the panel faces outward before lifting.
Dropping the unit may result in injury or equipment damage.
Do not block the ventilation slots on the cabinet.
•  Do not place any objects on the ventilation slots.
•  Do not install the unit in a closed space.
•  Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper air fl ow and may result in  fi re, electric shock, or 
equipment damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a \
problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in  fi re.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in \
electric shock.
If you plan to leave the unit unused for an extended period, disconnect \
the 
power cord from the wall socket after turning off the power switch for t\
he 
safety and the power conservation.
S 2111W _U M _E N _v1 .3 .in dd   4S2111W_UM_EN_v1.3.indd   43 /2 /2 007   6 :5 4:5 6 P M3/2/2007   6:54:56 PM 
						

							
5PRECAUTIONS
LCD Panel
In order to suppress the luminosity change by long-term use and to maint\
ain the stable luminosity, use of a monitor in 
lower brightness is recommended.
The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing 
pixels or lit pixels does not indicate damage to the LCD monitor.
Percentage of effective pixels: 99.9994% or higher.
The backlight of the LCD panel has a fi xed life span. When the screen becomes dark or begins to  fl icker, please contact 
your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There will be prints 
left on the screen if the pressed image is dark or black. If pressure is\
 repeatedly applied to the screen, it may deteriorate 
or damage your LCD panel. Leave the screen white to decrease the prints.\
Do not scratch or press on the panel with any sharp objects, such as a p\
encil or pen as this may result in damage to the 
panel. Do not attempt to brush with tissues as this may scratch the LCD \
panel.
When the monitor is cold and brought into a room or the room temperature\
 goes up quickly, dew condensation 
may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensati\
on 
disappears, otherwise it may cause damage to the monitor.
To use the monitor comfortably
An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the 
environmental conditions.
Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
S 2111W _U M _E N _v1 .3 .in dd   5S2111W_UM_EN_v1.3.indd   53 /2 /2 007   6 :5 4:5 6 P M3/2/2007   6:54:56 PM 
						

							
6CONTENTS
 CONTENTS
PRECAUTIONS ...................................................... 1
LCD Panel ................................................................... 5
To use the monitor comfortably ............................... 5
Chapter 1  Features and Overview ..................... 7
1-1 Features ............................................................ 7
1-2  Switches and Indicators  .................................. 7
1-3  Functions and Basic Operation  ...................... 8
Chapter 2  Settings and Adjustments .............. 10
2-1 Utility Disk ...................................................... 10
● Disk Contents ................................................... 10
●  To use ScreenManager Pro for LCD ................ 10
2-2 Screen Adjustment .........................................11 Digital Input ...........................................................11
Analog Input .........................................................11
2-3 Color Adjustment ........................................... 14 Simple adjustment [FineContrast mode] .......... 14
● FineContrast Mode ........................................... 14
●  To select FineContrast mode  ............................ 14
●  To update color setting of FineContrast mode  .. 14
Advanced Adjustments [Adjustment menu] ..... 15
●  To select an appropriate mode for images ....... 15
●  To set/adjust color ............................................ 16
2-4  Off Timer/Power Saving Settings ................. 17
●  To set monitor power-off time [Off Timer] ......... 17
●  To set monitor power-saving  [VESA DPMS/DVI DMPM]  ................................ 18
2-5  Screen Size Selection  .................................... 19
●  To change screen size [Screen Size] ............... 19
●  To adjust brightness of non-display area 
[Border Intensity] .............................................. 19
2-6  Power Indicator/EIZO Logo Display Setting  .......................................................................\
.. 20
●  To turn off the Power indicator while a screen is 
displayed [Power Indicator] .............................. 20
●  To display EIZO logo [EIZO Logo Appearing Function]  ........................................................... 20
2-7 Beeper Settings ............................................. 20
●  To set the beeper [Beep] .................................. 20
2-8 Locking Switches .......................................... 21
●  To lock operation [Adjustment Lock]  ................. 21
2-9  Setting Adjustment Menu Display ................ 21
●  To update menu settings  [Menu Size/Menu Position/Menu Off Timer/
Translucent] ...................................................... 21
2-10  Viewing Information/Setting Language ....... 22
●  To check settings, usage time, etc.  [Information] ..................................................... 22
●  To set a language to be displayed 
[Language] ....................................................... 22
2-11  Resumption of Default Setting ..................... 23
●  To reset color adjustment [Reset] ..................... 23
●  To reset all settings [Reset] .............................. 23
Chapter 3  Connecting Cables .......................... 24
3-1  Connecting Two PCs to the Monitor ............ 24
●  To set priority of PC to be displayed  [Input Priority] ................................................... 25
3-2  Connecting Peripheral USB Devices ........... 25
Chapter 4  Troubleshooting  ............................... 26
Chapter 5  Reference ......................................... 28
5-1 Attaching an Arm ........................................... 28
5-2 Cleaning  .......................................................... 29
5-3 Speci fi cations ................................................ 30
5-4 Glossary ......................................................... 35
5-5 Preset Timing ................................................. 37
S 2111W _U M _E N _v1 .3 .in dd   6S2111W_UM_EN_v1.3.indd   63 /2 /2 007   6 :5 4:5 6 P M3/2/2007   6:54:56 PM 
						

							
7Chapter 1  Overview and Features
Chapter 1  Features and Overview
Thank you very much for choosing an EIZO color LCD monitor.
1-1 Features
•  21.1(S2111W)/24.1(S2411W) wide format LCD
•  Applicable to HDCP
•  Equipped with the ContrastEnhancer and OutlineEnhancer functions
•  Dual-input compliant (DVI-I x 2 connectors)
•  DVI digital input (TMDS) compliant
•  Horizontal scan frequency, Vertical scan frequency and Resolution are as follows;
Horizontal scan 
frequencyAnalog S2111W 24 - 82 kHz
S2411W 24 - 94 kHz
Digital S2111W 31 - 65 kHz S2411W 31 - 76 kHz
Vertical scan 
frequency Analog S2111W 49 - 86 Hz  49 - 61 Hz (1680 × 1050)
49 - 76 Hz (1280 × 1024)
S2411W 49 - 86 Hz 49 - 61 Hz (1920 × 1200) 49 - 76 Hz (1600 × 1200)
Digital S2111W 59 - 61 Hz (VGA TEXT: 69 - 71 Hz) S2411W 59 - 61 Hz (VGA TEXT: 69 - 71 Hz)49 - 51 Hz (1080p@50 Hz)
Resolution S2111W 1680 dots × 1050 lines S2411W 1920 dots × 1200 lines
•  Compatible with frame synchronization mode  
  59 - 61 Hz, 49 - 51 Hz : 1080p@50 Hz (S2411W, digital)
•  Smoothing (soft - sharp) function for adjustment of enlarged images
•  FineContrast mode to allow the best mode for screen display
•  The utility software “ScreenManager Pro for LCD” (for Windows) to control  the monitor from a PC with mouse/keyboard is included (refer to the EIZ\
O 
LCD Utility Disk).
• 
The ArcSwing 2 Stand enables to adjust the monitor height and monitor angle \
freely
1-2  Switches and Indicators
  
Switch Adjustment menu (*ScreenManager 
® )
1.  Input signal selection switch
2.  Auto adjustment switch
3. Enter switch
4.  Control switches (Left, Down, Up, Right)
5. Power switch
6. Power indicator
Indicator status Operation status
Blue The screen is displayed
Orange Power saving
Off Power off
* ScreenManager ® is an EIZO’s nickname of the Adjustment menu.
NOTE
•  While the screen is displayed, the  blue power indicator that is lighting 
blue can be turned off (see “Power 
Indicator/Logo Display Setting,” on 
page 20).
•  For the power indicator status with  “Off Timer” set, refer to “To set 
monitor power-off time” on page 17.
NOTE
•  The stand of the unit can be replaced with an arm or another stand. (Refer 
to “5-1 Attaching an Arm” on page 
28.)
S2111W _U M _E N _v1 .3 .in dd   7S2111W_UM_EN_v1.3.indd   73 /2 /2 007   6 :5 4:5 7 P M3/2/2007   6:54:57 PM 
						

							
8Chapter 1  Overview and Features
1-3  Functions and Basic Operation
To adjust the screen and color
1 Automatic AdjustmentTouch 
.
Touch 
 again.
•  The Adjustment menu and the FineContrast menu cannot  be displayed at the same time.
Color adjustment
Simple adjustment [FineContrast mode]
This function allows easy selection of a desired mode 
from  fi ve modes according to monitor application.
●  “Brightness,” “Temperature,” and “Gamma” can be set 
for each mode (Custom/Movie/Picture/Text/sRGB).
Settable functions vary with the display mode.
     FineContrast menu
Page 14
    
Page 11
Brightness adjustment
Touch  or  to adjust brightness.
 Analog input only
2 Screen Adjustment
●  [Clock*] to remove vertical bars …… see page 12
●  [Phase*] to remove horizontal flickering and blur/distortion  ………………… see page 12
●  [Position*] to correct screen position   ……………………………………… see page 12
●  [Resolution*] to adjust extra image or cut image  …………………………… see page 13
●  [Range Adjustment*] to adjust color gradation automatically ……………………… see page 13
●  [Smoothing] to adjust blurred texts/lines …………………………… see page 13
●  [Signal Filter*] to set when a noise appears on the screen  …………… see page 27
*  Items marked with * can be adjusted with analog  input.
Page 11
Color Adjustment
Advanced Adjustment
●  “Brightness,” “Temperature,” “Gamma,” “Saturation,” “Hue,” “Gain,” “6 Colors” and 
“Enhancer” can be set for each mode (Custom/
sRGB/Text/Picture/Movie). 
Settable functions vary with the display mode.
Resuming the default settings.
●  Reset color adjustment [Reset] …… see page 23
Page 15
 Main menu (Refer to page 9 for operation)
S 2111W _U M _E N _v1 .3 .in dd   8S2111W_UM_EN_v1.3.indd   83 /2 /2 007   6 :5 4:5 7 P M3/2/2007   6:54:57 PM