Eizo Flexscan S2111w Users Manual

19Chapter 2  Settings and Adjustments
2-5  Screen Size Selection
● To change screen size [Screen Size]
The image with the resolution other than the recommended resolution is 
displayed in full screen automatically. You can change the screen size by using 
 from  menu.
Menu Function
Full (default setting) Displays an image in full screen. Images are distorted in 
some cases because the vertical rate is not equal to the 
horizontal rate.
Enlarged Displays an image in full screen. In some cases, a blank...

20Chapter 2  Settings and Adjustments
2-6  Power Indicator/EIZO Logo Display Setting
● To turn off the Power indicator while a screen is displayed 
[Power Indicator]
This function enables to turn off the Power indicator (blue) while a screen is 
displayed.
(1)  Choose  from the Adjustment menu, and touch 
.
(2)  Choose  from the  menu, and touch 
.
The  menu appears.
(3)  Select “Disable” with  or , and touch .
The Power Indicator setting is completed.
●  To display EIZO logo [EIZO Logo Appearing...

21Chapter 2  Settings and Adjustments
NOTE
•  The display time of the FineContrast menu remains unchanged.
2-8 Locking Switches
● To lock operation [Adjustment Lock]
This function locks the switches to retain the status adjusted or set on\
ce.
Switches that can 
be locked •  (Enter switch) Adjustments/settings using 
Adjustment menu
• 
 (Auto Adjustment switch)
Switches that cannot 
be locked • 
 
/  FineContrast mode selection/adjustment using 
control switches
• 
  /  Brightness adjustment using...

22Chapter 2  Settings and Adjustments
Translucent
Set the transparency for menu display using the following procedure.
(1)  Choose  from the Adjustment menu, and touch 
.
(2)  Choose  from the  menu, and touch 
.
(3)  Choose  from the  menu, and touch 
.
The  menu appears.
(4)  Adjust the transparency for menu display with  or , and touch .
The transparency setting is completed.
2-10  Viewing Information/Setting Language
●  To check settings, usage time, etc. [Information]
This function allows you to...

23Chapter 2  Settings and Adjustments
NOTE
•  For default settings, refer to “Main default settings (factory settings)” on 
page 32.2-11  Resumption of Default Setting
● To reset color adjustment [Reset]
The hue in the color mode currently set will revert to the default setti\
ngs (factory 
settings).
(1)  Choose  from the Adjustment menu, and touch 
.
(2)  Choose  from the  menu and touch 
.
The  menu appears.
(3)  Select  with  or , and touch .
The reset operation is completed.
●  To reset all...

24Chapter 3  Connecting Cables
3-1  Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the two DVI-I connectors \
on 
the back of the monitor.
Connection examples
DVI-I connector (SIGNAL1) DVI-I connector 
(SIGNAL2)
SIGNAL1 SIGNAL2Example 1DigitalDVI Signal cable 
(supplied FD-C39)Signal cable 
(supplied FD-C16)D-sub mini 
15-pinAnalog
Example 2Analog
D-sub mini 
15-pin
Signal cable 
(FD-C16 option)Signal cable 
(supplied FD-C16)D-sub mini 
15-pinAnalog
Example 3Digital...

25Chapter 3  Connecting Cables
NOTE
• Power-saving functionWhen “1” or “2” is selected for 
, the monitor’s 
power-saving function works only 
when the two PCs are in the power-
saving mode.  
•  When only one PC is connected, the  input signal is detected automatically 
regardless of whether the input signal 
1 or 2 has priority.● To set priority of PC to be displayed [Input Priority]
When two PCs are connected, either one can be displayed preferentially. The 
monitor senses the input signal regularly....

26Chapter 4  Troubleshooting
Chapter 4  Troubleshooting
If a problem still remains after applying the suggested remedies, contac\
t your local dealer.
• No-picture problems → See No.1 - No.2.
• Imaging problems  → See No.3 - No.14.
• Other problems  → See No.15 - No.18.
• USB problems  → See No.19 - No.20.
Problems Possible cause and remedy
1.  
No picture
•  Power indicator does not light. •  Check whether the power cord is connected correctly.
• Touch 
•  Power indicator is lighting blue.
•  Power...

27Chapter 4  Troubleshooting
Problems Possible cause and remedy
7.  Characters are blurred. •  Adjust using .
8.  Upper part of the screen is distorted as shown  below.                   
•  This is caused when both composite sync (X-OR) signal and separate vertical sync signal are input 
simultaneously. Select either composite signal or 
separate signal.
9.  The screen is too bright or too dark. •  Adjust . (The LCD monitor backlight has a 
fi xed life span. When the screen becomes dark or begins 
to  fl...

28Chapter 5  Reference
 Chapter 5  Reference
5-1 Attaching an Arm
The stand can be removed and replaced with an arm (or another stand) t\
o be 
attached to the monitor. Use an arm or stand of EIZO option.
[Attaching]
1  Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down.
2  Remove the stand. (Prepare a screwdriver.)Unscrew the four screws securing the unit and the stand with the 
screwdriver.
3  Attach the monitor to the arm or stand.Secure the monitor...