Eizo Flexscan Hd2441w Users Manual

39Chapter 5  Reference
5-3   Specifications
PanelLCD Panel24.1-inch (610 mm) TFT color LCD with anti-glare hard coating
Viewing angle: Vertical 178°, Horizontal 178° (CR: 10 or more)
Dot Pitch0.270mm
Resolution1920 dots × 1200 lines
Max. Display ColorApprox. 16.77 million colors: Applicable to 8 bit (1048.77 million colors)
Display Area 
 (H × V)518.4mm × 324.0mm
PC Input Signal
Digital Input Signal (PC 1)Input Signal ConnectorDVI-D × 1
Horizontal Scan Frequency31.5 - 76kHz: each preset signal ±1kHz...

40Chapter 5  Reference

Dimensions (Main unit)566 mm (22.3”) (W) × 362.5 - 480mm (14.3 - 18.9”) (H) × 230mm (9.1”) (D)
Dimensions (without Stand) 566mm (22.3”) (W) × 396mm (15.6”) (H) × 92.3mm (3.6”) (D)
Weight (Main unit)
10.3kg (22.7 lbs)
Weight (without Stand)
7.9kg (17.4 lbs)
Environmental ConditionsOperating temperature : 0°C - 35°CStorage temperature : -20°C - 60°CRelative humidity: 30% - 80% R.H. (no condensation)
*1  For some AV equipment
*2  The monitor is in compliance with the HighDefinition...

41Chapter 5  Reference

Setting menu list
ItemPC 1PC 2VIDEO 1VIDEO 2PinP
ScreenAuto Screen Adjust−✓−−✓*
Auto Range Adjust−✓−−✓*
Clock−✓−−✓*
Phase−✓−−✓*
Hor.Position−✓−−✓*
Ver.Position−✓−−✓*
Resolution−✓−−✓*
Signal Filter−✓−−✓*
ColorColor Mode✓✓✓✓✓
Brightness✓✓✓✓✓
Black Level✓✓✓✓✓
Contrast✓✓✓✓✓
Saturation✓✓✓✓✓
Hue✓✓✓✓✓
Temperature✓✓✓✓✓
Advanced SettingsOutlineEnhancer✓✓✓✓✓
ContrastEnhancer✓✓✓✓✓
Gain✓✓−−✓
Gamma✓✓✓✓✓
Noise Filter−−✓✓−
I/P Conversion−−✓✓−
Reset✓✓✓✓✓
SoundVolume✓✓✓✓✓
Treble✓✓✓✓✓
Bass✓✓✓✓✓...

42Chapter 5  Reference

Main default settings (factory settings)
PC Input SignalVIDEO Input Signal
Color ModeCustom
Volume
Speaker30 
Headphone10
PinP Off−
LanguageEnglish
BrightRegulatorStandard
Signal DetectionCurrent Input Signal
Power IndicatorOn
BeepOn
Auto Screen Size−Enable
Color Space−Auto
USBPC 1
Screen SizeFull Screen[480i/480p/576i/576p signal] 4:3[1080i/720p/1080p signal] 16:9 Full
Off Timer
Disable
Option list
Cleaning KitEIZO ScreenCleaner
Arm LA-011-W (wall mount arm [1-axis])
LA-030-W...

43Chapter 5  Reference

5-4  Glossary
Clock
The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in 
use, when the analog input signal is converted to a digital signal for image display. 
This is called clock adjustment. If the clock pulse is not set correctly , some vertical bars appear on the screen.
Color Space
Color space is a method to specify and express the color. There are YUV and RGB, etc. YUV expresses the color by 
using the...

44Chapter 5  Reference
HDMI (High-Definition Multimedia Interface)HDMI is a digital interface standard, developed for consumer electrical appliance or  AV equipment. This standard is 
issued on the basis of the DVI standard which is one of an interface specifi cation for the connection between a PC 
and a monitor. The projected image, sound and control signal without compressed enable to be sent/received with one 
cable. Only the input signal of this product corresponds to the standard. 
I/P (Interlace...

45Chapter 5  Reference

5-5  Preset Timing
The following table shows factory preset video timing. (for analog signal only)
ModeDot clock
Frequency
PolarityHorizontal: kHz
Vertical: Hz
NEC PC-9821 640×[email protected] MHzHorizontal31.48Negative
Vertical
70.10Negative
VGA 640×480@60Hz
25.2 MHzHorizontal31.47Negative
Vertical
59.94Negative
VGA 720×400@70Hz
28.3 MHzHorizontal31.47Negative
Vertical
70.09Positive
Macintosh  640×[email protected] MHzHorizontal35.00Negative
Vertical
66.67Negative
Macintosh...

46Chapter 5  Reference

VESA CVT RB  1680×1050119.0 MHz
Horizontal64.67Positive
Vertical
59.88Negative
VESA CVT RB 
 1920×1200154.0 MHzHorizontal74.04Positive
Vertical
59.95Negative
(The signal specified below is also applicable for the use of some AV 
equipment.)
ModeDot clock
Frequency
PolarityHorizontal:  kHz
Vertical: Hz
720@50Hz 1280×720p74.3 MHzHorizontal37.50Positive
Vertical
50.00Positive
720@60Hz 1280×720p74.3 MHzHorizontal45.00Positive
Vertical
59.94Positive
1080@50Hz 1920×1080p148.5...

47Chapter 5  Reference
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This 
means that your display is designed, manufactured and tested according to 
some of the strictest quality and environmental requirements in the world. 
This makes for a high performance product, designed with the user in focus 
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements: Ergonomics
●  Good visual ergonomics and image...

48Chapter 5  Reference

For U.S.A. , Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible PartyEIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone:  (562) 431-5011
declare that the product Trade name:  EIZO
Model:  FlexScan HD2441W
is in conformity with Part 15 of the FCC Rules. Operation of this pr oduct is subject to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any...