Eizo Flexscan Hd2441w Users Manual

19Chapter 3  Settings and Adjustment

3-3  Color Adjustment
Simple Adjustment
● To select the color mode [Color Mode]
Switching the color mode enables you to set the monitor to the appropriate 
display mode.
[PC Input Signal]
An appropriate display mode is selectable out of five modes.
ModesStatus
Text
Suitable for displaying text for word processing or spreadsheets.
PictureSuitable for displaying images such as photos or picture images.
MovieSuitable for playing back animated images.
Custom (PCx*)...

20Chapter 3  Settings and Adjustment

Advanced Adjustment
● To adjust/set Color Mode
Independent adjustments/settings and saving of the Color adjustment are 
available for each mode.
[PC Input Signal] ✓: 
Adjustment available     −: Adjustment unavailable
IconFunction 
Color mode
Text
PictureMovieCustom 
(PCx*)sRGB
Brightness✓✓✓✓✓
Black Level−−−✓−
Contrast−✓✓✓−
Saturation✓✓✓✓−
Hue✓✓✓✓−
Temperature✓✓✓✓−
 Advanced Settings
OutlineEnhancer−✓✓✓−
ContrastEnhancer−✓✓✓−
Gain−−−✓−
Gamma−−−✓−
Reset✓✓✓✓✓
[VIDEO...

21Chapter 3  Settings and Adjustment

● Adjustment items
MenuDescriptionAdjustment range
BrightnessTo adjust the full screen brightness as desired0 to 100%
Black LevelTo adjust the black level as desired0 to 100%
NOTE
•  RGB (Red, Green, Blue) is adjusted respectively for PC input 
signal, and RGB is adjusted together for VIDEO input signal.
ContrastTo adjust the contrast of the image0 to 100%Every color gradation can be displayed when setting to 50%.
SaturationTo adjust color saturation-50 to 50...

22Chapter 3  Settings and Adjustment

NOTE
•  Do not cover the sensor.
•  Set to “High” if you feel a little 
brighter with “Standard” setting 
status.
[Procedure]
(1)  Choose the  icon in the Setting menu and tap the slide bar.
(2)  Choose the  icon in the  menu and tap the slide bar.
(3)  Select the desired color mode in the  menu and tap the slide bar.
(4)  Select the desired function to adjust/set in the  menu and tap the  slide bar.
The selected function menu appears.
(5)  Trace the slide bar left...

23Chapter 3  Settings and Adjustment

NOTE
•  The sound adjustments other than 
[Sound Level] are available to 
perform for speakers and headphones 
respectively. When adjusting the 
headphone sound, connect the 
headphone to the monitor.
•  The volume difference may occur 
depending on the kinds of input 
signals, since the average sound level 
of the external equipment differs. For 
example, if the volume difference of 
VIDEO 1 and VIDEO 2 input signals 
becomes large, you can reduce the 
volume...

24Chapter 3  Settings and Adjustment

3-5  PinP (Picture in Picture) Display
● To display the PC input signal screen (Main Window) 
and the VIDEO input signal screen (Sub-Window) 
simultaneously [PinP]
When a PC and an AV equipment are connected to the monitor, the monitor 
allows you to display both screen images on the Main Window and the Sub-
Window.
PC (PC input signal screen)
AV equipment 
(VIDEO input signal screen)
Main Window (PC input signal screen)
Sub-Window (VIDEO input signal screen)...

25Chapter 3  Settings and Adjustment

NOTE
•  Touch  to display the Sub-
Window display again.
■  To switch the input signal for Main Window/Sub-Window
[Procedure]
(1)  Touch 
.
The Input Selection menu appears.
(2)  Trace the slide bar left and right to select / 
and tap the slide bar.
The Input Selection menu for / appears.
(3)  Trace the slide bar left and right to select the input signal and tap the slide bar.
The input signal is changed.
[Input selection for Main Window]Ex.: PC 1→PC 2 for Main...

26Chapter 3  Settings and Adjustment

● To change the Sub-Window position [Sub-Window 
Position]
You can select the Sub-Window position either “Upper Left”, “Upper Right”, 
“Lower Left” and “Lower Right”.
Upper LeftUpper Right
Lower LeftLower Right
[Procedure]
(1)  Choose the  icon in the Setting menu and tap the slide bar.
(2)  Choose the  icon in the  menu and tap the slide bar.
The  menu appears.
(3)  Trace the slide bar left and right to select either “Upper Left”, “Upper Right”, “Lower Left” or...

27Chapter 3  Settings and Adjustment

3-6  Screen Size Changing
● To change the screen image/projected image size 
appearing on the screen [Screen Size]
[PC Input Signal]
If you set the resolution other than recommended resolution on the monitor, the 
monitor shows the image automatically enlarged on the whole screen. The 
 menu allows you to change the screen display size.
SettingsStatus
Full ScreenDisplays an image in full screen. Images are distorted in some cases because the vertical rate is not...

28Chapter 3  Settings and Adjustment

The screen sizes and kinds are shown below.
The available setting value differs depending on the input signal.
Input signal:Aspect ratio 
(Format)
Screen size
4:3  
(480i/480p/ 
576i/576p)
Letterbox*  
(480i/480p/ 
576i/576p)
16:9
(480i/480p/ 
576i/576p)(1080i/720p/1080p)
4:3−
Letterbox−
16:9
16:9 Full−−−
*  Letterbox shows a 4:3 screen display keeping the vertical and horizontal ratio of 16:9.
[Procedure]
(1)  Choose the  icon in the Setting menu and tap the slide...