Eizo Flexscan Hd2441w Users Manual

9Chapter 1  Features and Overview

1-2  Names of Switches
123456
Switch
Setting menu (ScreenManager® *)
1. Sensor (Detects the environmental brightness.)
2.   Input Signal Selection switch (
)
3.   Slide bar
4.   Menu switch (
)
5.   Power switch (
)
6.   Power indicator
Indicator statusOperation status
BlueThe screen is displayed
OrangePower saving
Off Power off
*  ScreenManager ® is an EIZO’s nickname of the Setting menu.  (In this manual, the setting/adjustment item names in the Setting menu are put...

10Chapter 1  Features and Overview

1-3  Functions
Switching the Input Signal
PinP (Picture in Picture) display
● To switch the input signal for the Main Window/ 
Sub-Window  …………………………see page 25
●  To hide the Sub-Window display with its sound  
being heard [Sub-Window Off]   ……
see page 25
Single display
Input Selection menu (As for the menu operation, refer to page 13.)
● To switch the input signal for the desired display  
sent from the equipment [Input Selection]   …see page 15
1  Screen...

11Chapter 1  Features and Overview

Setting/Adjusting the Monitor (Continued)
Resumption of Default Settings
● To reset all settings [Reset] 
Page 14
Setting menu  (As for the menu operation,  refer to page 13.)
Monitor Settings menu
Language Setting to be displayed
●  To set the language displayed in the menu 
[Language]   …………………………see page 31
Adjusting the Brightness automatically
●  To adjust the screen brightness automatically 
corresponding to the brightness of the image 
and the environment...

12Chapter 2  Basic Operation

2-1  Operation Switch Usage
Chapter 2  Basic Operation
NOTE
•  There are three methods of operation: 
• Touching the switch
• Tapping the slide bar
• Tracing the slide bar
■  Turning the power On/Off
■  Displaying/Quitting a menu
*OQVU
4FMFDUJPO
NFOV4FUUJOH
NFOV
7PMVNF
NFOV
	8IFO
UIF
NFOV
JT
OPU
EJTQMBZFE
PO
UIF
TDSFFO

■ Selecting a menu item
  Setting and Adjusting


5IF
JODSFBTFEFDSFBTF
TQFFE
PG
UIF

BEKVTUNFOU
WBMVF
NBZ
DIBOHF

EFQFOEJOH
PO
UIF
USBDJOH
TQFFE
PG
...

13Chapter 2  Basic Operation

2-2  Menu Operation
● Basic operation of the Input Selection menu
[Displaying the Input Selection menu and selecting the input signal]
(1)  Touch 
 on the operation panel.
The Input Selection menu appears.
(2)  Trace the slide bar left and right to select the input signal and tap the slide bar.
The screen image appears.
[Quitting the Input Selection Menu]
(1)  Touch 
.
The Input Selection menu quits.
● Basic operation of the Setting menu
[Displaying the Setting menu and...

14Chapter 2  Basic Operation

NOTE
•  The following operations are available 
in the locked status.
-  Power ON/OFF by touching 
.
-  Power ON by touching 
, 
 or the slide bar.
-  Operation lock function ON/OFF
-  EIZO Logo appearing function 
ON/OFF (Page 30)
NOTE
•  For default settings, refer to “Main 
default settings (factory settings)” on 
page 42.
2-3  Resumption of Default Settings
● To reset the color adjustment [Reset]
Only the hue in the color mode currently set will revert to the default...

15Chapter 3  Settings and Adjustment

Attention
•  If the [USB] setting is not set properly, the USB devices connected 
to the monitor may not work or 
no sound may come out from the 
speakers.
•  Please note the following when 
switching the setting.
-  When connecting a memory device 
such as a USB memory to the 
monitor, the data may be lost and 
damaged. Be sure to change the 
USB setting after removing the 
memory device.
-  When an application such as a 
sound playback, etc. works, the 
sound may...

16Chapter 3  Settings and Adjustment

Attention
•  This function works correctly when 
an image is fully displayed over the 
Windows or Macintosh display area. 
It does not work properly when an 
image is displayed only on a part of 
the screen (DOS prompt window, for 
example) or when a black background 
(wallpaper, etc.) is in use.
•  The Auto Adjust function may not 
work properly with some graphics 
boards.
NOTE
•  When the screen image is not 
displayed with the proper resolution 
even after Auto...

17Chapter 3  Settings and Adjustment

●  Advanced Screen Adjustment
4   Run the Screen Adjustment Program.
Load the EIZO LCD Utility Disk on the PC, and start the Screen 
Adjustment Program compatible with the PC in use.
After the program starts up, perform the adjustment in step 5 following the 
instructions of the program.
5   Perform the advanced adjustment using the  menu in 
the Setting menu.
●  To eliminate vertical bars [Clock](1)  Choose the  icon in the  menu and tap the slide 
bar.
The  menu...

18Chapter 3  Settings and Adjustment

●  To correct screen position [Hor.Position/Ver.Position]Since the number of pixels and the pixel positions are fixed on 
the LCD monitor, only one position is provided to display images 
correctly. The position adjustment is made to shift an image to the 
correct position.
SettingsScreen status
Hor.Position
When the screen position on the monitor is 
shifted horizontally, perform the screen position 
adjustment.
Ver.PositionWhen the screen position on the monitor is...