Eizo Coloredge Cg245w Users Manual
Here you can view all the pages of manual Eizo Coloredge Cg245w Users Manual. The Eizo manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31Chapter 3 Setting Monitor
3-9. Restoring the Default Setting
There are two types of Reset. One is to reset the color adjustment only to the default settings, and the
other is to reset all the settings to the default settings.
Attention
• After resetting, you cannot undo the operation.
NOTE
• For main default settings, refer to “Main default settings (factory settings)” on page 46 .
● To reset color adjustment values [Color Reset]
Only the adjustment values in the current mode will revert to the...](http://img.usermanuals.tech/thumb/1704/51626/w300_eizo_coloredge_cg245w-user-s-manual-30.png "Page 31
31Chapter 3 Setting Monitor
3-9. Restoring the Default Setting
There are two types of Reset. One is to reset the color adjustment only to the default settings, and the
other is to reset all the settings to the default settings.
Attention
• After resetting, you cannot undo the operation.
NOTE
• For main default settings, refer to “Main default settings (factory settings)” on page 46 .
● To reset color adjustment values [Color Reset]
Only the adjustment values in the current mode will revert to the...")
31Chapter 3 Setting Monitor 3-9. Restoring the Default Setting There are two types of Reset. One is to reset the color adjustment only to the default settings, and the other is to reset all the settings to the default settings. Attention • After resetting, you cannot undo the operation. NOTE • For main default settings, refer to “Main default settings (factory settings)” on page 46 . ● To reset color adjustment values [Color Reset] Only the adjustment values in the current mode will revert to the...
Page 32
![Page 32
32Chapter 4 SelfCalibration
Chapter 4 SelfCalibration
This product is equipped with an built-in calibration sensor. This function allows you to set the calibration
targets or schedule in advance, and automatically execute regular calibration. Calibration can be executed
independently by the monitor.
Attention
• To execute SelfCalibration, it is necessary to set the calibration targets etc.
• For more information, refer to “4-3. Setting Calibration Details [Setting]” (page 33).
NOTE
• Use...](http://img.usermanuals.tech/thumb/1704/51626/w300_eizo_coloredge_cg245w-user-s-manual-31.png "Page 32
32Chapter 4 SelfCalibration
Chapter 4 SelfCalibration
This product is equipped with an built-in calibration sensor. This function allows you to set the calibration
targets or schedule in advance, and automatically execute regular calibration. Calibration can be executed
independently by the monitor.
Attention
• To execute SelfCalibration, it is necessary to set the calibration targets etc.
• For more information, refer to “4-3. Setting Calibration Details [Setting]” (page 33).
NOTE
• Use...")
32Chapter 4 SelfCalibration Chapter 4 SelfCalibration This product is equipped with an built-in calibration sensor. This function allows you to set the calibration targets or schedule in advance, and automatically execute regular calibration. Calibration can be executed independently by the monitor. Attention • To execute SelfCalibration, it is necessary to set the calibration targets etc. • For more information, refer to “4-3. Setting Calibration Details [Setting]” (page 33). NOTE • Use...
Page 33
![Page 33
33Chapter 4 SelfCalibration
4-3. Setting Calibration Details [Setting]
● Setting the mode to execute SelfCalibration [Mode Selection]
Set the mode to execute SelfCalibration.
Procedure
1. Choose from the SelfCalibration menu, and press
.
2. Choose from the Setting menu, and press
.
3. Select the mode to change with
or , and press .
4. Select “On” or “Off ” with
or .
5. Press
to exit the adjustment.
NOTE
• When “CAL1/CAL2/CAL3” is set to “On”, SelfCalibration can be executed.
• When...](http://img.usermanuals.tech/thumb/1704/51626/w300_eizo_coloredge_cg245w-user-s-manual-32.png "Page 33
33Chapter 4 SelfCalibration
4-3. Setting Calibration Details [Setting]
● Setting the mode to execute SelfCalibration [Mode Selection]
Set the mode to execute SelfCalibration.
Procedure
1. Choose from the SelfCalibration menu, and press
.
2. Choose from the Setting menu, and press
.
3. Select the mode to change with
or , and press .
4. Select “On” or “Off ” with
or .
5. Press
to exit the adjustment.
NOTE
• When “CAL1/CAL2/CAL3” is set to “On”, SelfCalibration can be executed.
• When...")
33Chapter 4 SelfCalibration 4-3. Setting Calibration Details [Setting] ● Setting the mode to execute SelfCalibration [Mode Selection] Set the mode to execute SelfCalibration. Procedure 1. Choose from the SelfCalibration menu, and press . 2. Choose from the Setting menu, and press . 3. Select the mode to change with or , and press . 4. Select “On” or “Off ” with or . 5. Press to exit the adjustment. NOTE • When “CAL1/CAL2/CAL3” is set to “On”, SelfCalibration can be executed. • When...
Page 34
![Page 34
34Chapter 4 SelfCalibration
● Setting the monitor date and time [Clock Adjustment]
Set the monitor date and time.
NOTE
• When ColorNavigator is started, the date and time are automatically set. Refer to the ColorNavigator User’s
Manual on the CD-ROM.
Procedure
1. Choose from the SelfCalibration menu, and press
.
2. Choose from the Setting menu, and press
.
The Clock Adjustment menu appears.
3. Select the date using
or , and then press .
4. Select the time using
or , and then press .
The...](http://img.usermanuals.tech/thumb/1704/51626/w300_eizo_coloredge_cg245w-user-s-manual-33.png "Page 34
34Chapter 4 SelfCalibration
● Setting the monitor date and time [Clock Adjustment]
Set the monitor date and time.
NOTE
• When ColorNavigator is started, the date and time are automatically set. Refer to the ColorNavigator User’s
Manual on the CD-ROM.
Procedure
1. Choose from the SelfCalibration menu, and press
.
2. Choose from the Setting menu, and press
.
The Clock Adjustment menu appears.
3. Select the date using
or , and then press .
4. Select the time using
or , and then press .
The...")
34Chapter 4 SelfCalibration ● Setting the monitor date and time [Clock Adjustment] Set the monitor date and time. NOTE • When ColorNavigator is started, the date and time are automatically set. Refer to the ColorNavigator User’s Manual on the CD-ROM. Procedure 1. Choose from the SelfCalibration menu, and press . 2. Choose from the Setting menu, and press . The Clock Adjustment menu appears. 3. Select the date using or , and then press . 4. Select the time using or , and then press . The...
Page 35
![Page 35
35Chapter 4 SelfCalibration
● Setting the calibration schedule [Schedule]
Set the calibration schedule for SelfCalibration.
Attention
• Clock adjustment is necessary for SelfCalibration to operate.
Procedure
1. Choose from the SelfCalibration menu, and press
.
2. Choose from the Setting menu, and press
.
The schedule setting menu is displayed.
3. Select the items to change with
or , and press .
Setting Item Setting Range Setting
Starting Time Off
Power Save
Immediately Set the timing at...](http://img.usermanuals.tech/thumb/1704/51626/w300_eizo_coloredge_cg245w-user-s-manual-34.png "Page 35
35Chapter 4 SelfCalibration
● Setting the calibration schedule [Schedule]
Set the calibration schedule for SelfCalibration.
Attention
• Clock adjustment is necessary for SelfCalibration to operate.
Procedure
1. Choose from the SelfCalibration menu, and press
.
2. Choose from the Setting menu, and press
.
The schedule setting menu is displayed.
3. Select the items to change with
or , and press .
Setting Item Setting Range Setting
Starting Time Off
Power Save
Immediately Set the timing at...")
35Chapter 4 SelfCalibration ● Setting the calibration schedule [Schedule] Set the calibration schedule for SelfCalibration. Attention • Clock adjustment is necessary for SelfCalibration to operate. Procedure 1. Choose from the SelfCalibration menu, and press . 2. Choose from the Setting menu, and press . The schedule setting menu is displayed. 3. Select the items to change with or , and press . Setting Item Setting Range Setting Starting Time Off Power Save Immediately Set the timing at...
Page 36
![Page 36
36Chapter 5 Power Saving Function
Chapter 5 Power Saving Function
5-1. Setting the Power Saving [Power Save]
This function allows you to set the monitor into the power saving mode according to the PC status.
When the monitor enters the power saving mode, no image is displayed on the screen.
Attention
• Either switch off the main power supply or remove the power plug from the socket to completely stop the supply
of electricity to the monitor.
• Devices connected to the USB port (upstream and...](http://img.usermanuals.tech/thumb/1704/51626/w300_eizo_coloredge_cg245w-user-s-manual-35.png "Page 36
36Chapter 5 Power Saving Function
Chapter 5 Power Saving Function
5-1. Setting the Power Saving [Power Save]
This function allows you to set the monitor into the power saving mode according to the PC status.
When the monitor enters the power saving mode, no image is displayed on the screen.
Attention
• Either switch off the main power supply or remove the power plug from the socket to completely stop the supply
of electricity to the monitor.
• Devices connected to the USB port (upstream and...")
36Chapter 5 Power Saving Function Chapter 5 Power Saving Function 5-1. Setting the Power Saving [Power Save] This function allows you to set the monitor into the power saving mode according to the PC status. When the monitor enters the power saving mode, no image is displayed on the screen. Attention • Either switch off the main power supply or remove the power plug from the socket to completely stop the supply of electricity to the monitor. • Devices connected to the USB port (upstream and...
Page 37
37Chapter 6 Troubleshooting Chapter 6 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer.• No-picture problems → See No.1 - No.2. • Imaging problems (digital input) → See No.3 - No.8. • Imaging problems (analog input) → See No.3 - No.12. • Other problems → See No.13 - No.16. Problems Possible cause and remedy 1. No picture • Power indicator does not light. • Check whether the power cord is connected correctly. • Turn off the main power,...
Page 38
38Chapter 6 Troubleshooting Problems Possible cause and remedy 4. Characters are blurred • Check whether the signal setting of your PC matches the resolution and the vertical frequency settings for the monitor. • Adjust using . (page 24 ) 5. Afterimages appear • Afterimages are particular to LCD monitors. Avoid displaying the same image for a long time. • Use the screen saver or power save function to avoid displaying the same image for extended periods of time. 6. Green/red/blue/white dots or...
Page 39
39Chapter 6 Troubleshooting Problems Possible cause and remedy 16. The monitor connected with the USB cable is not detected. / USB devices connected to the monitor does not work. • Check whether the USB cable is connected correctly. (page 43 ) • Change the USB port to another one. If the PC or peripheral devices works correctly by changing the USB port, contact your local dealer. (Refer to the manual of the PC for details.) • Reboot the PC. • If the peripheral devices work correctly when the PC...
Page 40
40Chapter 7 Reference Chapter 7 Reference 7-1. Attaching an Arm The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option. Attention • When attaching an arm or stand, follow the instructions of their user’s manual. • When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the VESA standard. - Clearance between the screw holes: 100 mm × 100 mm - Thickness of plate: 2.6...