Eizo Coloredge Cg245w Users Manual

11Chapter 1  Introduction
3. Adjust/set the selected item with , and press .
3 Exiting
Press  a few times.
The adjustment menu finishes.
Showing Button Guide
Press the front buttons (except  button), the button guide appears above the button. (When using the monitor 
with “Portrait” position, the button guide appears next to the button.)
Tips
•   The button guide will continue to appear while the Adjustment menu or Mode menu is showing.
•   The button guide is displayed differently depending on the...

12Chapter 1  Introduction
Functions
The following table shows all the Adjustment menu’s adjustment and setting menus.
Main Menu	Item	Adjusting/Setting
ColorBrightness“2- 4. Color Adjustment” (page 20
)
Contrast
Temperature
Gamma
Advanced 
SettingsHue
Saturation
Outline Enhancer
Gain
Black Level
6 Colors
Color Reset “3-9. Restoring the Default Setting” (page 
31)
Screen
Screen Size “2-5. Displaying Lower Resolutions” (page 
26)
Range Extension “2-2. Expanding Signal Output Range 
[Range Extension]” (page...

13Chapter 1  Introduction
The following table shows all SelfCalibration menu’s adjustment and setting menus.
Main Menu	Item	Adjusting/Setting
SelfCalibrationCalibration“4-1. Executing SelfCalibration [Calibration]” 
(page 32
)
ResultCalibration Result “4-2. Checking Calibration Results [Result]” 
(page 32
)
Ambient Light
SettingMode Selection “4-3. Setting Calibration Details [Setting]” 
(page 33
)
Target
Schedule
Clock Adjustment
  

14Chapter 2  Adjusting Screen
Chapter 2  Adjusting Screen
2-1. Setting Screen Resolution
Compatible Resolutions/Frequencies
The monitor supports the following resolutions.
Analog Input
ResolutionDisplay Mode FrequencyDot Clock
640×480 VGA 60Hz
170MHz (Max.)
720×400
VGA TEXT 70Hz
800 ×600 VESA 60Hz
1024 ×768 VESA 60Hz
1280 ×960 VESA 60Hz
1280 ×1024 VESA 60Hz
1600 ×1200 VESA 60Hz
1680 ×1050
 VESA CVT 60Hz
1920 ×1080 CEA-861 60Hz
1920 ×1200* VESA CVT RB 60Hz
Digital Input (DVI/DisplayPort)
ResolutionDisplay...

15Chapter 2  Adjusting Screen
Setting Resolution
When you connect the monitor to the PC and find that the resolution is improper, or when you want to 
change the resolution, follow the procedure below.
●  Windows 7
1. Right-click the mouse anywhere on the desktop except for icons.
2.  From the displayed menu, click “Screen resolution”.
3.  On the “Screen Resolution” dialog, select the monitor.
4.  Click “Resolution” to select the desired resolution.
5.  Click the [OK] button.
6.  When a confirmation...

16Chapter 2  Adjusting Screen
2-2. Expanding Signal Output Range [Range Extension]
The signal range can be expanded to meet the input signal from 64/1023 - 1019/1023 to 0/1023 -1023/1023.
Procedure
1. Choose  from the Adjustment menu, and press 
.
2.  Choose  from the  menu, and press 
.
3.  Select “On” with 
 or .
4.  Press 
 to exit the adjustment.
Attention
• Settings cannot be performed when CAL mode is being displayed. 
2-3. Displaying Screen Correctly
Digital Input
When digital signals are input,...

17Chapter 2  Adjusting Screen
Attention
• This function works correctly when an image is fully displayed over the Windows or Macintosh display area. It 
does not work properly when an image is displayed only on a part of the screen (command prompt window, for 
example) or when a black background (wallpaper, etc.) is in use.
•  This function does not work correctly with some graphics boards.
If the screen is not displayed correctly even after adjusting in step 1 above, perform the adjustments 
according...

18Chapter 2  Adjusting Screen
4 Perform advanced adjustments for the following using the  menu of 
the .
Adjust the clock, phase and position, in this order.
●  To eliminate vertical bars [Clock]
Procedure
1.  Choose  from the  menu, and press 
.
2.  Adjust the clock with 
 or .
Press  slowly so as not to miss the adjustment point.
3. Press  to exit the adjustment.
When blurring, flickering or bars appear on the screen after adjustment, proceed to [Phase] to remove flickering 
or blurring.
●  Remove...

19Chapter 2  Adjusting Screen
5 Adjust the color gradation.
●  To adjust color gradation automatically [Range Adjustment]
Every color gradation (0 to 255) can be displayed by adjusting the signal output level.
Procedure
1.  Display Pattern 2 in full screen on the monitor using the “Screen Adjustment Utility” or the screen 
adjustment pattern files.
2. Choose  from the  menu, and press .
The color gradation is adjusted automatically.
When the auto adjustment is completed, a message appears. Select “OK” to...

20Chapter 2  Adjusting Screen
2- 4. Color Adjustment
●  To select the display mode (Color Mode)
Color Mode allows you to select easily the adequate mode suitable for the monitor’s application.
Color Mode
Mode Purpose
  1-Custom Available for t\fe color settin\w\bs accordin\b to your preference.
  2-Adobe
®RGB Suitable for color matc\fin\b wi\wt\f  Adobe®RGB
 compatible perip\ferals.
  3-sRGB Suitable for color matc\fin\b wi\wt\f sRGB compatible perip\ferals.
  4-EBU Suitable for reproducin\b t\fe \wcolor...