Eizo Coloredge Cg245w Users Manual

21Chapter 2  Adjusting Screen
●  To perform advanced adjustments
The  menu of the Adjustment menu allows you to set and save the independent color adjustment 
for each mode.
Attention
• Wait 30 minutes or more from monitor power on before starting the color adjustment. 
(Allow the monitor to warm up for at least 30 minutes before making adjustments.)
•  Perform the range adjustment first when adjusting color for analog input signals. 
(Refer to “To adjust color gradation automatically” on page 19 ).
•...

22Chapter 2  Adjusting Screen
●  To adjust the brightness [Brightness]
The screen brightness is adjusted by changing the brightness of the backlight (Light source from the LCD 
back panel).
Adjustable range: 0 to 100%
Procedure
1. Choose  from the Adjustment menu, and press 
.
2.  Choose  from the  menu, and press 
.
3.  Adjust the brightness with 
 or .
4.  Press 
 to exit the adjustment.
NOTE
• You can also adjust the brightness using  and .
•  When your feel the image is bright even if the brightness...

23Chapter 2  Adjusting Screen
●  To adjust the gamma value [Gamma]
The gamma value can be adjusted. The luminance of the monitor varies depending on the input signal, 
however, the variation rate is not proportional to the input signal. To keep the balance between the input 
signal and the luminance of the monitor is called as “Gamma correction”.
Adjustable range: 1.6-2.7 (0.1 unit)
Procedure
1. Choose  from the Adjustment menu, and press 
.
2.  Choose  from the  menu, and press 
.
3.  Adjust the gamma...

24Chapter 2  Adjusting Screen
●  To enhance the outline of the image [Outline Enhancer]
OutlineEnhancer functions to emphasize outline of the images by emphasizing the color difference 
between pixels composing the images. This may improve the texture of the material and its feel of the 
images.
On the contrary, it also functions to reproduce the images smoothly by gradating its outline.
Procedure
1. Choose  from the Adjustment menu, and press 
.
2.  Choose  from the  menu, and press 
.
3.  Choose  and...

25Chapter 2  Adjusting Screen
●  To adjust six colors [6 Colors]
The hue and saturation can be adjusted for each of six colors: Magenta, Red, Yellow, Green, Cyan, and 
Blue.
Adjustable range: -100 to 100
Procedure
1. Choose  from the Adjustment menu, and press 
.
2.  Choose  from the  menu, and press 
.
3.  Choose , and press 
.
4.   Choose the color for adjustment among , , , , , or , 
and press 
.
5.  Select  or , and press 
.
6.  Adjust the 6 colors with 
 or .
7.  Press 
 to exit the adjustment.
  

26Chapter 2  Adjusting Screen
2-5. Displaying Lower Resolutions
●  To change screen size [Screen Size]
The image with the resolution other than the recommended resolution is displayed in full screen 
automatically. You can change the screen size by using  from  menu.
Menu Function
Full  
(default setting) Displays an image in full screen. Images are distorted in some cases because the 
vertical rate is not equal to the horizontal rate.
Enlarged Displays an image in full screen. In some cases, a blank...

27Chapter 3  Setting Monitor
Chapter 3  Setting Monitor
3-1. Enabling/Disabling Mode Selection [Mode Preset]
Allows you to select the specified modes only.
Use this function when all the display modes are not available or when keeping the display mode 
unchanged.
Procedure
1. Choose  from the Adjustment menu, and press 
.
2.  Choose  from the  menu, and press 
.
3.  Select the mode to change its settings with 
 or , and press .
4.  Select “On” or “Off ” with 
 or .
5.  Press 
 to exit the adjustment....

28Chapter 3  Setting Monitor
3-3. Setting the EIZO Logo Display [Logo]
The EIZO logo appears on the display when turning on the monitor. This function allows you to display, 
or not, the EIZO logo.
Procedure
1. Press 
 to turn off the monitor.
2.  Press 
 holding  down at least 2 seconds to turn on the monitor.
The Optional Settings menu appears.
3. Choose  from the  menu, and press .
4.  Select “On” or “Off ” with 
 or , and press .
5.  Select “Finish” with 
 or .
6.  Press 
 to exit the Optional...

29Chapter 3  Setting Monitor
3-5. Setting Language [Language]
This function allows you to select a language for the adjustment menu or displaying message.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Japanese /Simplified Chinese/Traditional Chinese
Procedure
1. Choose  menu from the Adjustment menu, and press 
.
2.  Choose  from the  menu, and press 
.
3.  Choose a language with 
 or .
4.  Press 
 to exit the adjustment.
3-6. Setting Range of Frequency [Signal Bandwidth]
Depending...

30Chapter 3  Setting Monitor
3-7. Setting the Display Position of the Adjustment Menu [Menu Position]
Adjust the menu position using the following procedure.
Procedure
1. Choose  from the Adjustment menu, and press 
.
2.  Choose  from the  menu, and press 
.
3.  Select a menu position with 
 or .
4.  Press 
 to exit the adjustment.
3-8. Sets the brightness of the front buttons [Indicator]
The brightness of the power button (blue) and operation keys (white) when the screen is displayed can be 
set. (The...