Eizo Coloredge Cg241w Users Manual

Important
Please read this User’s Manual  carefully to 
familiarize yourself with safe and effective 
usage  procedures. 
 
Please retain this manual for future 
reference
.
About TCO'03 ............................................................39
FCC Declaration of Conformit
y ..................................40
Hinweise zur Auswahl des richtige
n 
Schwenkarms für Ihren Monito
r / 
Hinweis zur
 Ergonomie ..............................................41
SAFETY SYMBOLS...

2
SAFETY SYMBOLS

SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them carefully.
WARNING
Failure  to  abide  by  the  information  in  a WARNING  may  result  in  serious  injury  and  can 
be life threatening.
CAUTION
Failure  to  abide  by  the  information  in  a  CAUTION  may  result  in  moderate  injury  and/or 
propertyor product damage.
Indicates a prohibited action.
Indicates to ground for safety.
Copyright© 2007 EIZO NANAO CORPORATION...

PRECAUTIONS
3

PRECAUTIONS
IMPORTANT!
w
This product has been adjusted specifically for use in the region to which it was originally shipped. 
If operated outside the region to which it was originally shipped, the product may not perform as 
stated in the specifications.
 
This product is designed for use in Japan only and cannot be used in any other countries.
w
To ensure personal safety and proper maintenance, please read this section and the caution statements 
on the unit (refer to the figure below)....

4
PRECAUTIONS

 WARNING
Place the unit at the strong and stable place.
A  unit  placed  on  an  inadequate  surface  may  fall  and  result  in  injury  or  equipment 
damage.
If  the  unit  falls,  disconnect  the  power  immediately  and  ask  your  dealer  for  advice. 
Do  not  continue  using  a  damaged  unit.  Using  a  damaged  unit  may  result  in  fire  or 
electric shock.
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
• Do not...

PRECAUTIONS
5

 WARNING
When  attaching  an  arm  stand,  please  refer  to  the  user's  manual  of  the  arm 
stand and install the unit securely.
Not  doing  so  may  cause  the  unit  to  come  unattached,  which  may  result  in  injury  or 
equipment  damage.  When  the  unit  is  dropped,  please  ask  your  dealer  for  advice. 
Do  not  continue  using  a  damaged  unit.  Using  a  damaged  unit  may  result  in  fire  or 
electric  shock.  When  reattaching  the  tilt  stand,  please  use...

6
PRECAUTIONS
LCD Panel
In  order  to  suppress  the  luminosity  change  by  long-term  use  and  to  maintain  the  stable  luminosity,  use  of  a 
monitor in lower brightness is recommended.
The  LCD  panel  is  manufactured  using  high-precision  technology.  However,  note  that  the  appearance  of  any 
missing pixels or lit pixels does not indicate damage to the LCD monitor.
Percentage of effective pixels : 99.9994% or higher.
The  backlight  of  the  LCD  panel  has  a  fixed  life  span....

1. Introduction
7
1. Introduction
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
• 24" wide format LCD
• Applicable to HDCP
• Dual inputs compliant (DVI-I x 2)
• DVI Digital input (TMDS ) compliant
• [Horizontal scanning frequency] 
Analog: 24 - 94kHz 
Digital: 26 - 78 kHz 
[Vertical scanning frequency]
 
Analog: 47.5 - 86Hz (1600x1200: 47.5 - 76Hz / 1920x1200: 47.5 - 61Hz) 
Digital: 47.5 - 63Hz (VGA text: 69 - 71Hz) 
[Resolution] 1920 dots x 1200 lines
•  Frame Synchronous...

8
1. Introduction

1-2. Buttons and Indicators
1�456783�
1. Sensor (BrightRegulator) 
2. Adjustment Lock button 
3. Input Signal Selection button 
4. Mode button 
5. Auto Adjustment button 
6. Enter button 
7. Control buttons (Left, Down, Up, Right) 
8. Power button 
9. Power indicator
Indicator statusOperation status
BlueThe screen is displayed
Orange Power saving
OffPower off
*ScreenManager® is an EIZO's nickname of the Adjustment menu.
Control Panel
FineContrast menu Adjustment menu...

1. Introduction
9

1-3. Utility Disk
An "EIZO LCD Utility Disk" (CD-ROM) is supplied with the monitor. The following table shows the 
disk contents and the overview of the application software programs.
Disk contents and software overview
The disk includes a monitor information file, application software programs for adjustment, and User’s 
Manual. Refer to "Readme.txt” or the "Readme" file on the disk for software startup procedures or file 
access procedures.
ItemOverviewFor...

10
2. Installation

2. Installation
2-1. Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-I connector on the back of the monitor.
Connection examples
PC 1PC 2
(Ex.1)DigitalDVISignal Cable
 
(FD-C39 enclosed) 
Signal Cable 
(FD-C16 enclosed) D-Sub 
mini 15 
pin
Analog
(Ex.2)Analog
D-Sub 
mini 15 
pinSignal Cable
 
(FD-C16 enclosed) 
Signal Cable 
(FD-C16 optional) D-Sub 
mini 15 
pin
Analog
Selecting input signal
Switch the input signal with . Input signal...