Eizo Coloredge Cg241w Users Manual

2. Installation
11

Priority settingPerformance
1If signals from both inputs are present, the monitor gives preference to 
Signal 1 in the following cases.
• When the power of the monitor is turned ON.
• When the signal input to Signal 1 is changed even if active input was 
Signal 2.
2 If signals from both inputs are present, the monitor gives preference to 
Signal 2 in the following cases.
• When the power of the monitor is turned ON.
• When the signal input to Signal 2 is changed even if active input...

12
2. Installation

2-2. Making Use of USB (Universal Serial Bus)
This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC 
or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily 
connected.
Required system environment
• PC equipped with USB ports or another USB hub connected to the USB compliant PC
• Windows 2000/XP/Vista // Mac OS 9.2.2 or later
• USB Cable (MD-C93, enclosed)
NOTE
• The USB hub function may not work...

3. Screen Adjustment and Settings
13

3. Screen Adjustment and Settings
3-1. Basic Operation and Functions
ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast 
mode easily.
NOTE
•Main Menu and FineContrast Menu cannot be activated at the same time.
1  Entering the ScreenManager
Press  once to display the main menu of the ScreenManager. 
2  Making Adjustments and Settings
1. Select the desired sub menu icon using  and press . The sub menu appears. 
2. Use...

14
3. Screen Adjustment and Settings

Functions
The following table shows all the ScreenManager's adjustment and setting menus. "*" indicates 
adjustments of analog input only and "**" indicates digital input only.
Main menu
Sub menu Reference
ScreenClock*3-2. Screen Adjustment
Phase*
Position
*
Resolution*
Range Adjustment*
Smoothing
Signal Filter*
Color(Custom)*1Brightness3-3. Color Adjustment
Temperature
Gamma
Saturation
Hue
Gain
6 Colors
Reset
PowerManager DVI DMPM
**3-4....

3. Screen Adjustment and Settings
15

3-2. Screen Adjustment
NOTE
• Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments.
The monitor displays the digital input image correctly based on its pre-setting data.
Analog Input
Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for 
adjusting the screen to its proper position. There is only one correct position for each display mode. It is 
also recommended to use the...

16
3. Screen Adjustment and Settings

3  Adjust by using  menu in the ScreenManager
(1)Vertical bars appear on the screen 
 Use the  adjustment. 
Select the  and eliminate the vertical bars by using  and  of the Control buttons.  
Do not continuously press the Control buttons, as the adjustment value will change quickly and 
make it difficult to locate the most suitable adjustment point. If the horizontal flickering, blur 
or bars appear, proceed to  adjustment as follows.
 
(2)Horizontal flickering,...

3. Screen Adjustment and Settings
17

(4)Screen image is smaller or larger than the actual screen images. 
  Use the  adjustment. 
Adjustment is needed when the input signal resolution and the resolution now being displayed 
are different.  
Select  and confirm if the resolution now being displayed is the same as the input 
resolution. If it is not, adjust the vertical resolution using  and  and adjust the horizontal 
resolution using  and . 
 
 
 
 
 
 
 
 
 
 
 
 
 
4  Adjust the output signal range...

18
3. Screen Adjustment and Settings

3-3. Color Adjustment
Simple adjustment [FineContrast mode]
This function allows you to select the best display mode for monitor brightness, etc.
To select FineContrast mode
Directly pressing  allows you to select the best suited mode for screen display from 4 FineContrast 
modes; Custom, sRGB, EMU and CAL. Color settings each mode can be adjusted by using the  
menu of the ScreenManager.
Tips
• When the main menu of ScreenManager is displayed on the screen, the...

3. Screen Adjustment and Settings
19

Advanced Adjustments[Adjustment menu]
Color settings of each FineContrast mode can be adjusted and saved by using the  menu of the 
Adjustment menu.
In the analog input, perform the "Range Adjustment" before making the color adjustments. During color 
adjustments, the FineContrast mode cannot be changed. Select the mode in advance by
using  
Adjustment Items
The adjustable items and displayed icons on the  menu depend on the selected FineContrast 
mode....

20
3. Screen Adjustment and Settings

Adjustment Contents
MenuFunction DescriptionsAdjustable range
BrightnessTo set the brightness of the screen0~100%
Tips
• The values shown in the “%” are available only as reference.
Temperature
To set the color temperature4000K~10000K 
in 500 K increments (including 9300 K)
Tips
• The values shown in the Kelvin are available only as a reference tool.
• While color temperature is adjusted,  is adjusted automatically according to the 
color temperature.
• Setting the...