Eiki Projector Lc Xb33n User Manual

1

Video InputVideo Input
Video System Selection
Press  the  MENU  button  to  display  the  On-Screen 
Menu.  Use  the  Point ◄►  buttons  to  move  the  red 
frame pointer to the AV System Menu icon.
1
AV System Menu (Video or S-Video)
AV System Menu (Component)
Use  the  Point ▲▼  buttons  to  move  the  red  arrow 
pointer  to  the  desired  system  and  then  press  the 
SELECT button.

If the projector cannot reproduce proper video image, 
select a specific broadcast signal format from...



Video Input
Move the red frame pointer to the 
desired image mode and press 
the SELECT button.
The selected image mode is check marked.
Image Select Menu
Standard
Cinema
Blackboard(Green)
For viewing with the user preset image mode in the Image 
Adjust Menu (see pages 43–44).Image1–
Image Select Menu icon
Select the desired image mode from among Dynamic, 
Standard, Cinema, Blackboard (Green), Image 1, Image 2, 
Image 3, and Image 4 by pressing the IMAGE button on the 
remote control....

3

Video InputVideo Input
Image Adjustment
Press the MENU button to display the On-Screen 
Menu. Use the Point ◄► buttons to move the red 
frame pointer to the Image Adjust Menu icon.
1
Use the Point ▲▼ buttons to move the red frame 
pointer to the desired item and then press the SELECT 
button to display the adjustment dialog box. Use the 
Point ◄► buttons to adjust the setting value.
Press the Point ◄ button to decrease the contrast; press the 
Point ► button to increase the contrast (from 0...



Video Input
Use the Point ◄► buttons to adjust the gamma value to 
obtain a better balance of contrast (from 0 to 15).
Gamma
Press the Point ◄ button to decrease the sharpness of the 
image; press the Point ► button to increase the sharpness 
of the image (from 0 to 15).
Sharpness
An interlaced video signal can be displayed in progressive 
mode. Select one of the following options.
 Off  ..........  Disabled.
  L1  ..........  For an active picture.
  L2  ..........  For a still picture....

5

Video InputVideo Input
This projector has the picture screen resize function, which enables you\
 to customize the image size.
Normal
Screen Size Adjustment
Screen MenuPress the MENU button to display the On-Screen 
Menu. Use the Point ◄► buttons to move the red 
frame pointer to the Screen Menu icon.
1
Use the Point ▲▼ buttons to move the red frame  
pointer to the desired function and then press the 
SELECT button.

Provide the image at the 4:3 normal video aspect ratio.
Custom
Adjust the...

6

Language
The language used in the On-Screen Menu is available in 
English, German, French, Italian, Spanish, Portuguese, 
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, 
Russian, Chinese, Korean, and Japanese.
Set the red frame 
pointer to the item 
and press the 
SELECT button.
Press the SELECT button 
at Language, then the 
Language Menu appears.
Setting Menu (Language)
Setting Menu icon
Setting
Setting
Auto setup
This function enables Auto Keystone correction and Auto PC 
adjustment by...

7

SettingSetting
Display
Blue back
When this function is “On,” a blue image is displayed while 
the input signal is not detected. 
Keystone
This function is used to store or reset the keystone 
correction when the AC power cord is unplugged. Use the 
Point ▲▼ buttons to switch between each option.
  Store  ........  Keep the keystone correction even when the 
AC power cord is unplugged.
  Reset  .......  Release the keystone correction when the AC 
power cord is unplugged.
To correct keystone...

8

Setting
Select [Yes] to capture 
the projected image. 
Select [Yes] to 
stop capturing.  
Capture
Logo (Logo and Logo PIN code lock settings)
Logo select
This function allows you to customize the screen logo with 
Logo select, capture, and Logo PIN code lock functions.
Note:
  • When “On” is selected in the Logo PIN code lock 
function, Logo select and Capture functions cannot be 
selected.
Capture
This function enables you to capture an image being 
projected to use it for a starting-up...

9

Setting
Logo PIN code lock
Setting
This function prevents an unauthorized person from 
changing the screen logo.
 Off  ............  The screen logo can be changed freely from 
the Logo Menu (p.48).
  On  ............  The screen logo cannot be changed without 
a Logo PIN code.
If you want to change the Logo PIN code lock setting, 
press the SELECT button and the Logo PIN code dialog 
box appears. Enter a Logo PIN code by following the 
steps below. The initial Logo PIN code is set to “4321” at...

50

Setting
Ceiling 
Rear 
Ceiling
When this function is set to “On,” the picture will be top/
bottom and left/right reversed. This function is used to 
project the image from a ceiling-mounted projector.
Rear
When this function is set to “On,” the picture will be left/right \
reversed. This function is used to project the image from 
rear of the screen.
Input search
This function detects the input signal automatically. When 
a signal is found, the search will stop. Use the Point ◄► 
buttons to select...