Eiki Projector Lc Xb33n User Manual

Multimedia Projector
Owner's Manual
LC-XB33NMODEL Network Supported 
□		Wireless LAN
        IEEE802.11b/g
□		 Wired LAN
        100-Base-TX/10-Base-T
 Memory Viewer 
□		SD Card Memory Viewer  
*	
Refer to the owner’s manuals below for details 
about network and memory viewer function.
■			Network Set-up and Operation
■				Memory viewer 



Features and Design 

3

Features and Design
This  Multimedia  Projector  is  designed  with  the  most  advanced  technology  for  portability,  durability,  and  ease  of  use. 
This  projector  utilizes  built-in  multimedia  features,  a  palette  of  16.77  million  colors,  and  matrix  liquid  crystal  display 
(LCD) technology.
◆ Compact Design
 This  projector  is  designed  compact  in  size  and  weight. 
It  is  easy  to  carry  and  installed  anywhere  you  wish  to 
use.
◆ Simple Computer System Setting
 The...



Table of Contents
Trademarks
Each  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its  respective 
corporation.
Features and Design  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
Table of Contents .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
To the Owner .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .5
Safety Instructions .  .  .  .  .  .  .  .  .  .  .  .  .  .  ....

5

Table of ContentsTo the Owner
CAUTION: TO  REDUCE  THE  RISK  OF  ELECTRIC 
SHOCK,  DO  NOT  REMOVE  COVER  (OR 
BACK) .  NO  USER-SERVICEABLE  PARTS 
INSIDE  EXCEPT  LAMP  REPLACEMENT  . 
R E F E R   S E R V I C I N G   T O   Q U A L I F I E D 
SERVICE PERSONNEL .
THIS  SYMBOL  INDICATES  THAT  DANGEROUS VOLTAGE  CONSTITUTING A  RISK  OF  ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS  SYMBOL  INDICATES  THAT  THERE  ARE IMPORTANT  OPERATING  AND  MAINTENANCE I N S T R U C T I O N S   I N   T H E...

6

Safety Instructions
All  the  safety  and  operating  instructions  should  be  read 
before the product is operated.
Read  all  of  the  instructions  given  here  and  retain  them 
for  later  use.  Unplug  this  projector  from AC  power  supply 
before  cleaning.  Do  not  use  liquid  or  aerosol  cleaners. 
Use a damp cloth for cleaning.
F o l l o w  a l l  w a r n i n g s  a n d  i n s t r u c t i o n s  m a r k e d  o n  t h e 
projector.
For  added  protection  to  the  projector  during  a...

7

Safety InstructionsSafety Instructions
Openings  in  the  cabinet  are  provided  for  ventilation.  To 
ensure  reliable  operation  of  the  product  and  to  protect  it 
from  overheating,  these  openings  must  not  be  blocked 
or covered. 
 CAUTION
Hot  air  is  exhausted  from  the  exhaust  vent.  When  using 
or  installing  the  projector,  the  following  precautions 
should be taken. 
– Do not put any flammable object or spray can near the 
projector, hot air is exhausted from the air...

8

Compliance
Federal Communications Commission Notice
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful 
interference  in  a  residential  installation.  This  equipment  generates,  uses,  and  can  radiate  radio  frequency 
energy,  and  if  not  installed  and  used  in  accordance  with  the  instructions,  may  cause...

9

CompliancePart Names and Functions
①⑤⑥③②
Front
Back
⑭⑦⑩⑨⑧
⑥

④
⑪⑬⑫
⑮⑯⑰
⑱
① Infrared Remote Receiver
② Focus Ring
③ Zoom Lever
④ Projection Lens
⑤ Lens Cap 
  (See page 59 for attaching.)
  
⑥ Air Intake Vent
⑦ Exhaust Vents
 CAUTION
Hot  air  is  exhausted  from  the  exhaust  vent.  Do  not  put heat-sensitive objects near this side.
⑧ USB Terminal
⑨ Power Cord Connector
⑩ Speaker
⑪ Terminals and Connectors
⑫ Top Controls and Indicators
⑬ LAN Connection Terminal
⑭ SD CARD Terminal
⑮ Lamp Cover 
⑯...

10

Part Names and Functions
Rear Terminal 
⑤ S-VIDEO IN
  Connect the S-VIDEO output signal from video 
equipment to this jack (p.19).
⑥ AUDIO IN
  Connect the audio output signal from video 
equipment connected to ⑤ or ⑫ to this jack. For a 
mono audio signal (a single audio jack), connect it 
to the L (MONO) jack (p.19).
⑪ COMPUTER/COMPONENT AUDIO IN
  Connect the audio output (stereo) signal from a 
computer or video equipment connected to ③ or ④ 
to this jack (pp.18, 20).
⑫ VIDEO IN
  Connect the...